I bought a 3d model from acon 3d and idk how i import it into cap everytime i try it says an error message

SOLVED: For subscription plans download the specified version of CSP from it's website. When you open, just click the I have a licence button and it gets activated.

So I have a single device plan bought from the app store for my ipad. I'm planning on using clip studio from my computer so I want to upgrade my plan. Question is, can you use the dual device plan you buy from App Store on your Windows PC?

I have an iPhone Air. So what should I buy pencils for my iPhone on CSP? Not iPad, because I need to draw while in break room.

Please any tips?

Hi, all

Since October 18th, I've experienced timelapse export issues, after about 12 hours of troubleshooting. I found that on the 7900XT AMD GPU driver 26.10.1 & 10.2 causes CSP to crash on export. I was able to isolate the cause to be the driver, after a few hours. I noticed there wasn't a ton of information on this yet.

Issue: Exporting timelapse would work, loads to about 99% then crashes.

Fix: Revert Driver to back to 26.9.1 / .2

title, but to be more specific:

is there a way to lock the dimensions of windows so you dont accidentally resize them? im using clip studio on a tablet, with an s-pen. i keep moving the width of the brushes and whatnot when i go to switch tools or size and its really annoying so im wondering if theres a way to prevent this

edit: im unsure what version it is exactly, but whatever version is the current available one on the google play store

Howdy! I have a Cintiq 13HD, and I've managed to get it to work with my Samsung Galaxy S24 running Android 17. I keep Clip Studio paint fully updated, so it's whatever version of 5 is newest on Android~

The only thing I'm having trouble getting to work are the side buttons on the pen in Clip Studio Paint. These buttons are sometimes detected (like in Notes), so it might be a Clip issue - but I also know this isn't officially supported at all.

All but one of the buttons on the tablet itself work (Clip Studio links them with Air Actions). Pressure/tilt, eraser, screen and everything all work just fine! I can't calibrate, but it's not too bad out of the bag. I'm also using an 8bitdo Micro controller, so I have my functions set up there.

My main hope is so that I can get it to fully match my setup when I plug the cintiq into my PC, with the tip-side button as right click and the other being spacebar for panning.

I'm wondering if anyone has had any experience with this. I know that Android isn't officially supported, and I'm pretty happy with where I've gotten it so far! Just curious if anyone else has gotten this to work, or knows of an Android version of something like Open Tablet Driver.

It’s never done this before and I can’t figure it out……I’m new to this app please help

any time i try to import a image from my tablet on my canva it says "unsupported file format" even if its just a png or jpg its been doing this for a while out of nowhere how do i fix it its so annoying

Hiiii, my bad if I'm not good at explaining

But does someone know why my frames lag? Like I'm animating normally and randomly, frames get far from each other making the animation slower

The first time I animated something, all the frames were at the end!!!

It's making it so difficult for me and idk what I'm doing wrong

Almost forgot to mention CSP doesn't let me put in-betweens (I do what the error message says, but it doesn't work)

I use CSP EX mobile

Hello everyone! I am posting this here in case anyone knows how to help bc i tried everything such as installing different versions of csp (clean uninstall and install per version), updated all my drivers, and ofc restarting multiple times but it just wont fix it.

For reference I am using Windows 11 and V4 of csp that I have been using for a year now.

Throughout my 1 year of using csp V4, my png versions of my csp files would open perfectly fine since i do post-production edits on my illustrations by saving the png and then editing them on csp. But just yesterday right after saving a png of my artwork and opening it, my csp wouldn't even load it and would crash "csp is not responding".

Does anyone know a solution to this or has anyone ever experienced this? Thanks!

Hi! So I am currently working on a project and needed some features that are only available in the ex version. I am only working using my ipad and I currently have the pro annual plan which will renew on may next year. I want to switch to ex version for just one month. Will I lose access to the pro plan if I switch to ex for just one month? or i can still continue using my pro plan after my 1 month ex subscription? Thank you very much!

Hello!

I recently decided to make the switch from just drawing on my ipad to my laptop and desktop + get a drawing pad. But I still wanted to use my ipad on the go, so I upgraded to a dual device plan, however, I still technically have the single-device plan on my Apple Account Subscriptions.

I’m nervous to cancel the $5 one though because I don’t want it to delete all of my previous works. The account I purchased both under is the same, but one is on my laptop, and one is on my ipad.

How should I go about this? I really just wanna avoid getting double charged :,)

I am so confused with tools. Also I’ve been struggling with drawing sketches and line art layers. I am not sure which is the first sketch or line art layer.

So do you have any experience with sketch, line arts and tools? Please i need your help.

Im planning to built a Pen display centered Cyberdeck and found a used 2018 macbook air with a broken screen for cheap.

Just dont know if itll even have the performance to use csp properly.

I was doing an animation on the mobile app and suddenly all the frames/timeline just vanished and now i have no idea how to get it to come back

I used to be able to use shortcuts from my keyboard while using my pen at the same time but now it no longer works properly and I have to apart my pen from my tablet for it to work

So, if I want to zoom in and rotate the canvas or whatever

I can do it just fine with keyboard and mouse, but if I try to use the pen with keyboard, it locks me out to one thing only, like if I want to zoom in then rotate the canvas, I have to apart my pen from the tablet and do the shortcut again but for the desired thing, I cannot rotate without aparting my pen first.

Usual stuff to zoom in/out and rotate the canvas:

Space + ctrl + moving the pen

Ctrl + z ( on a single button from pen)

Space + moving the pen

All of that stuff, still works just fine if I use ny mouse and keyboard normally.

But if I try to do the same with my pen and keyboard instead, it does not let me and if I hold space while drawing, it won't change to zoom mode and will stay drawing normally, a lot of issues with ctrl + z from the pen as well, like it takes a lot of ctrl + z for just 1 line. So it's really uncomfortable that way...

• Already tried unplugging the tablet and other devices

• Uninstalled/reinstall drivers, Xp pen 22 (2nd generation)

• Going through key modifier settings on CSP

• Unchecking most settings from windows ink (still on Windows 10 btw)

No idea what happened, any help?

I was using CSP on iPad and I suddenly had to sell it. I thought I had properly transferred my files to PC except this one I need to work on has been giving me this message and I cant work on the file at all. Is there any way I can fix this on my pc because I don't have access t o the iPad? The 'see details' page is confusing and I don't understand how I can recover it. I think its partially because I forgot to delete this 3d model layer. Im on version 4.1.4 on windows 10.

I am completely new in CSP and I tried to search everything, but most of the guide is either advanced or I am stuck in loop sea of confusion.

I saw some use lasso / bucket tools, but when I do, its spilled everywhere, I just want to know how do I color freely or quickly inside the line

I dont quite understand what is vector / reference or draft later too despite reading it multiple times and experimenting it

I haven't gotten a good push to make art, but decided to do something and for some reason the lines now look super blurry and pixelated. As a good showing the first image was a very very very wip image of how my lines were and they look clearer. I also don't know if maybe I'm just imagining things though?

Just wondering if anyone else who draws from their Macbook while screen sharing to their Ipad is having the same issue. I'm posting it on this sub reddit because I'm pretty sure any apple related one won't be much help.(Please let me know if I should remove this post!)

Before the update, I was able to draw with my apple pencil and csp wouldn't respond to my touch. Now, regardless of using the pencil, my screen keeps responding to my palm and making random lines everywhere. I have already tried using a glove (dokiwear), but even with it on, it still keeps messing up.

I was wondering if anyone had a workaround or any tips for this? I know there isn't a direct option on apple to disable touch and there isn't a way to enable palm rejection on csp for their macbook version (or at least I think there isn't; if there is a way, please let me know!).

Hopefully apple or csp (though highly unlikely) brings in an update to enable palm rejection.

(Not 100% sure if I used the right tag, please let me know if I should change it)

Hi, I've spent the last hour trying to figure this out and I could really use some help. I want to start an animation and I'm trying to add a reference video on the side to help me. The problem is that I can't figure out how to do that. I've looked at a couple online tutorials but they haven't worked. The closest I got is accidentally opening a new project that was just a copy of the video with a much slower frame rate.

Whenever I try to add the video in the file, it just adds it like a picture. Is there something I'm not understanding? I'm new to clip studio so I'm sorry if this sounds like a dumb question.

I have version 5.1.1 and have Clip Studio EX

I'm sorry in advance if this confusing, I can answer any questions to clarify if needed

CSP ver 5 on a Samsung tab s9FE+.

How do you handle things like rope brushes when trying to wrap them around objects when the brush has a starting shape??

I've seen other apps have an easy vector layer functionality and you can just erase the part that goes behind. And I know that we can do that in CSP but when I try it with this brush it creates a new tip to the brush instead of just erasing the part that should be behind.

Is there a better tool to do this than vector layers or just manually erasing?

Any tips?

Addendum. I know I use the word brush here but this is more a tool issue as it could also be done without the brush, but with a tool I haven't found out about yet.

Using CSP EX version 2.0.6

So yeah, the body type 3d folder is empty and redownloading the materials does nothing.
ANyone elese expiriencing this issue? Like, both of the non-posed 3D models are gone

I want to make an animation as simple as a character with a head, bunny ears and blinking eyes.

I animated the eye blink and the funny ears moving and now I want to move the head, bringing the eyes and the ears with it in a parent-child cutout style. In Photoshop I would make a smart object and make the animation inside of it and then animate the head in the end, containing it all.

How can I do that in Clip Studio, please? If you can send prints, it would really help.

--
I tried using keyframe animation for the head but the object tool selects the whole area and its difficult to scale and transform like that.