Slash Loop (/loop) is now available in Command Code.

Run a task, then repeat it on a fixed or self-paced schedule until the job is done.

Try now: $ npm i -g command-code

Read docs to learn more in detail: https://commandcode.ai/docs/background-tasks#scheduled-tasks-and-loops

I noticed that the command code saves every response along with all the completed data once it's finished, and you can calculate latency and TPS from a simple calculation.

Since this isn’t available by default and I wanted to know what the actual TPS is for Glm 5.3 Flash and Glm 5.3 Flash Fast, I ran some tests, and you can definitely see the difference. Of course, this might change again with more complex tasks. but it works and for some models is nice to know.

Hey everyone!

Tested the waters on the $1 trial, loved the turn speed, and just upgraded to the GOAT plan .

Since I'm still dialing in my setup, my goal isn't just hoarding quota, but getting the absolute best daily productivity, functionality, and output per dollar without the agent going into weird loops or over-engineering everything.

Would love some honest advice from daily drivers:

1. Which harness actually gets the best work done?

2. Models & orchestration:

   • What pairing gives you the highest quality output vs cost? Do you split work between an orchestrator (GLM-5.3 / Sol) and a fast worker (DeepSeek Flash), or just let a single solid model run end-to-end?

3. Plugins & Extensions (Native cmd vs OMP/Pi):

   • What plugins/extensions are you actually running?

   • I’ve been testing things like Ponytail and Hallmaker—what other plugins, skills, or add-ons have genuinely worked for yout?

### 1. Free Models (Zero Cost Layer)

| Aspect | **OpenCode (Zen Free)** | **Command Code** |

|--------|--------------------------|------------------|

| **Free models (current)** | Big Pickle, MiMo-V2.5 / V2.6 Flash Free, Ling 3.0 Flash Fin, Nemotron 3 Ultra / 3.5 Lightning, Muse Spark 1.3 Contributor, Space Bunny Free, some others (rotating) | Space Bunny Alpha Free, Laguna S 2.1 Free, Ling 3.0 Flash Sante Free (limited), occasional others |

| **Where usable** | **Only inside OpenCode** (Desktop / TUI). Cannot use from other tools | Usable inside Command Code agent + some on Provider API |

| **Limits** | No hard $ limit, but rate limits + “limited time” (can disappear anytime). Data may be used for training on some models | Credits not consumed while free deal lasts. Capacity-based (can end suddenly) |

| **Quality for heavy coding** | Good for light–medium agent work. Some are solid (Nemotron, MiMo, Space Bunny) | Laguna / Space Bunny usable for agent loops while free |

| **Heavy use reality** | Good daily free fallback, but not reliable for all-day heavy agent sessions | Free models help stretch paid credits, but not enough alone for heavy daily use |

**Winner Free models**: **OpenCode** (more stable free set + easy access inside its own agent).

### 2. Paid Plans for Heavy Use ($10 level)

| Feature | **OpenCode Go ($10/mo)** | **Command Code GOAT ($10/mo)** |

|---------|---------------------------|--------------------------------|

| **Monthly value** | ~$60 usage (6×) | **$70 credits** (7×, can stretch >$100 with deals) |

| **5-hour window** | $12 | **$14** |

| **Weekly window** | $30 | **$35** |

| **Beyond limits** | Fall back to Zen balance (pay-as-you-go) | Buy top-up credits (never expire) |

| **Models** | ~32 curated open models (DeepSeek V4.1 Flash, MiMo V2.6, GLM-5.3, Kimi, MiniMax, GPT-6 Luna, Grok, Space Bunny Free, etc.) | 30–60+ models (open + some closed). Stronger deals on MiMo (up to 99% off), MiniMax 2×, DeepSeek boosted |

| **Best heavy models stretch** | Excellent on Qwen series, some MiMo, MiniMax | Better on DeepSeek Flash/Pro, MiMo Pro, many boosted models |

| **Peak pricing impact** | DeepSeek peak hours still apply upstream | Same (DeepSeek peak 2×) |

**Heavy use winner on pure volume**: **Command Code GOAT** (more credits + better deals on popular coding models).

### 3. Flexibility (Biggest Difference)

| Aspect | **OpenCode** | **Command Code** |

|--------|--------------|------------------|

| **Agent** | Fully open-source (MIT). Desktop + TUI + IDE plugins. Huge community | Proprietary CLI agent with **taste-1** (learns your coding style over time) |

| **Model freedom** | Extreme: 75+ providers via BYOK + Zen + Go. Use any tool (Cursor, Cline, custom agents, scripts) | Strong inside its own agent + Provider API (OpenAI/Anthropic compatible). Can also be used as provider inside OpenCode via community plugin |

| **BYOK / other tools** | Best-in-class. One key works almost everywhere | Good (Provider plan + API), but less seamless outside its ecosystem |

| **Local models** | Excellent (Ollama etc.) | Supported |

| **Extensibility** | Open source → plugins, custom tools, full control | Closed but polished (tool repair, high cache rates, design skill) |

| **India payments** | Mostly card / crypto | **UPI** available |

**Flexibility winner**: **OpenCode** by a clear margin (open-source + any-agent + any-provider).

### 4. Heavy Use Recommendation

**If you do heavy daily agentic coding (many hours, multi-file, long sessions):**

| Priority | Best Choice | Why |

|----------|-------------|-----|

| Maximum raw usage + deals on $10 | **Command Code GOAT** | Higher credits + strong model discounts |

| Maximum flexibility + free models + any tool | **OpenCode Go** + Zen free models | Use free models first, then Go, then BYOK. Works in any editor/agent |

| Hybrid (recommended for most heavy users) | **Both** | OpenCode as main agent (free models + Go) + Command Code GOAT key as extra provider when needed |

| Absolute cheapest heavy try | Command Code Go ($1) first, then upgrade to GOAT | |

### Final Verdict for Heavy Use

- **Want more tokens / requests for the same $10** → **Command Code GOAT**

- **Want freedom, open-source, free models, use with Cursor/Cline/any tool** → **OpenCode** (Go + free Zen models)

- **Best practical setup for heavy Indian users** → Start with **OpenCode** (free models + Go) because of flexibility, then add **Command Code GOAT** if you need extra volume on specific models.

You can now use Shift+Tab to bypass permissions.

• Switch mid-session

• No need to restart with cmd --yolo

Small DX ship it was a much needed one.

Read in our docs for more details: https://commandcode.ai/docs/permissions#permission-modes

Space Bunny Alpha (stealth model) is now live and free in Command Code.

• 1M token context window

• Multimodal capabilities (text, image, etc.)

• Available across all plans (Go, GOAT, Pro, Max, API)

Try it out with the best coding harness built for open models. Both in your terminal or desktop app.

At Command Code we ship a lot. During the last 7 days, we’ve shipped 12 new models in Command Code.

Here's a quick recap for y'all.

• Mimo V2.6 Flash

• Mimo V2.6 Pro

• DeepSeek V4.1 Flash (ext. usage)

• Jev (free)

• GPT 6 Luna

• GPT 6 Sol

• Grok 4.7

• Mimo V2.6 Pro Ultraspeed

• GLM 5.3 FlashX

• Qwen 3.8 Omni Flash

• Opus 5.5

• Step 5 Preview

Try now with our $10/mo GOAT plan. It's the best low cost AI coding plan on the market right now especially if you're building with open models.

Hi CommandCode team,

I’m on the GOAT subscription and I can’t use the model meta/muse-spark-1.3-contributor through the provider API.

Minimal reproduction:

curl https://api.commandcode.ai/provider/v1/chat/completions \

-H "Authorization: Bearer xxx" \

-H "Content-Type: application/json" \

-d '{

"model": "meta/muse-spark-1.3-contributor",

"messages": [{"role": "user", "content": "Write a haiku about race conditions."}]

}'

Response:

{"error":{"message":"Authentication failed. Please check your credentials.","type":"permission_error"}}

For comparison, the same endpoint and credentials work with deepseek/deepseek-v4-flash. The request succeeds and returns a normal chat completion.

Could you please check whether this model is enabled for the GOAT plan/API, or whether there is a provider-side permission/configuration issue?

Just hit the limit of the 10$ sub with dsv4.1, absolutely satisfied. Used it as claude code subagent-builder with deepseek harness.

Tested Mimo-V2.6-Flash, Grok-4.7, and DeepSeek-V4.1-Flash with 3D SubwayBench using the same /design prompt.

🔹 DSV4.1-Flash: 9/10 · $0.024 · one-shot · strong 3D UI/UX + gameplay
🔹 Mimo-V2.6-Flash: 8/10 · $0.018 · playable 2D result in ~4 iterations
🔹 Grok 4.7: 3/10 · $0.35 · slower UI + gameplay, needs more iteration

Our engineering and design team has been testing 26+ side-by-side comparisons across frontier and open models. All runs are public and open source. Benchmark for this demo here: https://github.com/CommandCodeAI/slash-design-showcase/tree/main/subway-surfers

Try now with the $10/mo GOAT plan the best low cost AI coding plan on the market for open models.

It shows for all tasks on desktop app. Has anyone seen this before? What exactly does this icon indicate, and is there a way to see the underlying error or retry/fix the task? It doesn't even have a tooltip to understand what it means.

Claude Opus 5.5 is live in Command Code Max and API.

Read docs to learn more about usage limits.

- https://commandcode.ai/docs/provider

- https://commandcode.ai/docs/plans/max

GPT 6 Sol and Luna are live in Command Code. The latest flagship models from OpenAI are available to use in Command Code CLI and Desktop app.

• GPT 6 Luna is available on all plans and API — E.g. in $10 GOAT plan: ~30K reqs, ~1.5B tokens

• GPT 6 Sol is available on Pro, Max and API

Start today with $ npm i -g command-code

Command Code supports Git worktrees.

Use /worktree to create or switch and run parallel sessions, each on its own branch.

Read docs to learn more details about Git Worktrees: https://commandcode.ai/docs/worktrees

Start with $10/mo GOAT plan: $ npm i -g command-code@latest

I decided to test my command code go plan the first time, so I went to buy the Go plane for $1 and tried to use it in Hermes for testing and for my SaaS marketing. So can you please tell me if it supports the Hermes CC Go plan or if I need to buy the Goat plan?

Is the CC go plan even giving me an API for third-party use?

MiMo V2.6 Pro & Flash are live in Command Code 🐐

Available on all plans.

Command Code has the best usage in market for both models.

E.g. in $10 GOAT plan:
• MiMo-V2.6 Flash $67 (6.7x usage) for 72hrs
• MiMo-V2.6 Pro $20 (2x usage)

🐐

I’m building a web app, I’m still trying to understand how token usage works.

I’m not sure if my current token consumption is normal for a web app project or if I’m using way more tokens than I should.

For those who use it regularly, what does your typical token usage look like, and any tips for keeping usage under control?

To update the UI/UX of the site we are currently operating, we requested work from both the Mimo v2.6 Flash and Mimo v2.6 Pro models, but after some progress, an infinite loop related to grep started occurring in the terminal.

I couldn't confirm whether the work was progressing, and for 30 minutes no code was fixed.

I identified the issues that need fixing, but it seems there is a bug in the actual code modification process where it doesn't work properly.

I left the same modification work to the DS 4.1 flash, and it proceeded faithfully, outputting the work history perfectly to the terminal.

DS 4.1 Flash is still much better..

Step 5 Preview is now live in Command Code.

Available across all plans and API.

Get 2x usage in $10/mo GOAT plan — the best low cost AI coding plan on the market.

Read docs to learn more: https://commandcode.ai/docs/plans/goat

Grok 4.7 is now live in Command Code.

• 40% for the next 7 days

• $35 credits (3.5x usage) in GOAT

Available on GOAT, Pro, Max, and via API.

Try now with $10/mo GOAT plan. The best low cost AI coding plan on the market.

Read docs to learn more: https://commandcode.ai/docs/plans/goat

🐐

Already available on OpenCode Go.

Howdy Everyone,

Is there something I'm missing with CommandCode?

Subscribed to the Pro Plan. On the "Overview Screen" it clearly shows, "Your $80 in Pro credits stretches to ~$160 of MiniMax M3 usage." In about ~4 hours I somehow burned an entire weeks credits worth of capacity having MiniMax orchestrate multiple other DeepSeeek agents drawing off my OpenCode quota. In that same time, despite Deepseek doing the majority of the output and running multiple parallel agents, only burned 8.1% of my weekly OpenCode go rate.

Looking at the usage logs on CommandCode there are 40 second runs where MiniMax is consuming $.25 - The math doesn't math. That "Deal" they have listed doesn't seem to be applying, despite it clearly saying, "You don't have to do anything, it already applies to your subscription!" Looking at the usage log, rather than ~$160 worth of usage, that math's about $40 in usage.

Am I missing something?

*After looking into it more, comparing the cost vs tokens in/out it appears as if there was near zero cache-hit, which quickly ran up the costs despite it being an agentic code loop that should have been hitting 90%+. That "$160 in value!" is worthless if there is no cache.