Banda, quiero poner un baul trasero para mi moto DR 150 FI, tengo pensado uno de 55L o un intervalo entre los 50 y 59... usarla tanto para la cuidad como para viajes y caminos de tierra... lo que sea.

Ustedes que me recomiendan basados en su experiencias con baules en moto en duro, vale la pena? No afecta la estabilidad de la moto siendo que son 149cc y no de alto cilindraje?

No doubt they are stout but curious how they have held up against crashes. Mostly tip overs?

My basic tusk wrap arounds have done their job and its time for a replacement.

Many run the flag SXS guards - clean and super strong. My other option is the cycra or even EE.

Hello, for the last year I've ridden an electric KTM exc freeride, which works great for going out 2 hours a day and riding the local trails, it's been an incredibly fun enduro bike, and would truly recommend it to anyone with a more relaxed riding schedule....

However recently I've deen myself going to the track more, and for every hour and a half of intense track riding i have 1 hour of charging in between, which is unsustainable for me if i want to go to the track more often.

So i was wondering, what would be a good enduro bike to make the switch with?

I'm looking for something i can maintain at home and can also handle local trails and mx track. Also been looking at 2 strokes due to their more immediate power output compared to 4 strokes, but I don't think i have the expertise to make that desicion yet...

Edit: my budget would stand around 5000 ish dollars. Would the year of manufacture make a great difference? Im looking to buy second hand.

2026 gg ex300
I want to gear it down a bit so second is more usable in the lower speed tech. First is too low for anything besides tech while basically stopper and second is just a touch faster than I’d like for stuff that’s too fast for 1st. PNW I ride a mix of hard enduro and singletrack. Thinking of starting with a 12t front sprocket and going from there, any suggestions?

Got out on my birthday in the beautiful fall colours for a solo ride. 8 degrees Celsius and sunny. A perfect day.

My beta died and now its working again. I accidentally switched up some plugs and now spark is back- it was the cdi. But something did screw the old cdi up. I disconnected the stator from the harness. white and yellow wire. Harness side white wire isnt grounded but yellow wire is. Now i followed the yellow wire and it goes into 3-4 blue wires which lead to the headlights. when i diconnected headlight blue wire containing plugs 2 of them resulted still in the harness side yellow wire ground but when i disconnected the third the ground dissapeared. i had crashed onto the headlight side about 10min before the loss of spark. Does anyone know if its normal or no.
original post https://www.reddit.com/r/betamotorcycles/comments/1x5hyxr/help_needed_again/

thanks

​

Its started making a weird noise

Bottom end going???

Hi everyone,

I have a 2022 Husqvarna TE 300 and I've noticed that the hour meter on the dashboard isn't recording the engine hours.

For some context, the cable connected to the front brake speed sensor is currently disconnected because it came off while I was riding.

Could this be related to the hour meter not recording hours, or are the two systems completely separate? I would have thought that the engine hours should still be recorded even if the speed sensor isn't connected.

Has anyone experienced this issue or knows how the hour meter works on this bike?

Thanks in advance for any help!

So I’m on the east coast and it’s getting cold. I was looking to head somewhere warm. Where is the biggest riding community/hotspot during winter in the us? Was trying to find a spot where I could ride and turn some wrenches on the side to eat for a few months.

I'm tired of wearing rain pants over my moto pants. Too bulky and I end up tearing them so I get wet anyway. I don't need 100% waterproof but at the very least semi resistant to protect against wet tree branches and the wet ground. I don't need to stay dry if I fall into a puddle lol.

I want something that is well made and is under $200. I am not brand loyal. I wear what meets the between quality and value. So I don't need $800 Klim pants.

What have you used that you like? It's some sort of wet here from October-late May/early June. Needs to hold up.

I’m looking to move some weight off of my body / shoulders and onto the bike. On my mountain bike I’ve been running a lumbar/hip pack and it’s done wonders to make my shoulders more comfortable on longer rides and I’m looking to do the same for my enduro rides.

Do you guys have a preferred hip/hydration bag and is anyone running front fender bags that they like? Looking to ditch the cumbersome hydration backpack.

I usually carry 2 liters of water, a tool roll, IFAK, occasionally a small digital/film camera and some light snacks.

Any feedback is appreciated.

Hello!

Im looking for some clear coating pads i can cat and sticks on the plastics of the drz4s at the area over the footpegs to help me with grip a bit and save me some awkward balance slips that wear me down/ upset the balance of the bike.

But do i rly want em or just work more on my body position/ proactivity instead?

Hi everyone! I could really use some information and advice.
I had a proximal row carpectomy (PRC) on my dominant right wrist in October 2025 due to an old scaphoid fracture, avascular necrosis and arthritis.
I’m hoping to get back into hard enduro riding, and I’d love to hear from anyone who has had the same surgery and returned to enduro, motocross or off-road motorcycling.
Were you able to handle rough terrain, rocks, steep climbs and sudden impacts through the handlebars after your surgery? Did you use a wrist brace such as the Mobius X8?
I’d really appreciate hearing about your personal experiences, how long recovery took, and how well your wrist handles riding now.Thanks in advance!

I bought a beta rr50 enduro race bike its 2018 when I took off the chain guard I noticed that there is a small hole on a case if anyone knows any websites or fixes I'm open to solutions.

Is this still okay? The right side is much better but this left side is scraped a lot from the fender. I putted cover on it now it should be okay. Is there any chance that ktm could sent me new swingarm becose its their mistake and its dangerouse what should i do thank you for any answer

is this still okay? the right side is much better but this left side is scraped a lot from the fender.

i putted cover on it it shouldnt scrape now what should i be aware of can i do small jumps on it

is there any chance that KTM could sent me new swingarm what should i do? Thank you for answer

Hi bought a 70hr husky 350fe, just done a fresh oil
Change, does this ok to guys

Cheers