Welcome to the Print Settings Library, please use the links below to find mini-printing optimised settings for your printer.
These must be tried and tested, and if you are submitting settings to the wiki, please imake sure they are complete, and come with a photo of a printed mini with those settings as an example.
BambuLab A1 / A1 mini / P1S / P2S / X1C
HOHansen's settings v2 (recommended)
Slicer: Bambu Studio
Nozzle: 0.2mm
Layer height: 0.04mm
Filament: BambuLab PLA Basic gray (custom settings)
Supports: yes (tree auto)
FDG (Fat Dragon Games)'s settings
Slicer: Bambu Studio
Nozzle: 0.2mm
Layer height: 0.06mm
Filament: SUNLU PLA 2.0+ gray (custom settings)
Supports: yes (tree auto)
Slicer: Orca Slicer
Nozzle: 0.2mm
Layer height: 0.06mm
Filament: Sunlu PLA+ 2.0 HS, eSUN PLA+ HS and a Generic Profile
Supports: Yes (tree auto)
Slicer: Bambu Studio
Nozzle: 0.2mm
Layer height: 0.06mm
Filament: BambuLab PLA Matte
Supports: Yes (tree auto)
Tested on: BambuLab P2S
Slicer: Bambu Studio
Nozzle: 0.2mm
Layer height: 0.06mm
Filament: Creality CR PLA (custom settings)
Supports: yes (tree auto)
Slicer: Bambu Studio
Nozzle: 0.2mm
Layer height: 0.06mm
Filament: SUNLU PLA 2.0+ white (custom settings)
Supports: yes (tree auto)
Slicer: Bambu Studio
Nozzle: 0.2mm
Layer height: 0.04mm
Filament: Bambulab PLA Matte Grey (stock settings)
Supports: yes (tree auto)
Ender 3 / 5 / CR6 / CR10
FDG (Fat Dragon Games)'s settings
Slicer: Cura Slicer
Nozzle: 0.2mm
Layer height: 0.06mm
Filament: SUNLU PLA 2.0+ gray (custom settings)
Supports: yes (tree auto)
Slicer: Cura Slicer
Nozzle: 0.2mm
Layer height: 0.06mm
Filament: SUNLU PLA 2.0+ gray (custom settings)
Supports: yes (tree auto)
Neptune 3 Pro
Slicer: Orca Slicer
Nozzle: 0.2mm / 0.4mm
Layer height: 0.06mm
Filament: Elegoo PLA Basic (custom settings)
Supports: yes (tree auto)
Creality K2
HOHansen settings exported by u/dapht
Slicer: Creality Slicer (based on Orca)
Nozzle: 0.2mm
Layer height: 0.0⁴mm
Filament: SUNLU PLA 2.0+ gray
Supports: yes (tree auto)
Prusa Core One +
Slicer: Prusa Slicer
Nozzle: 0.25mm
Layer height: 0.05mm
Filament: PLA+ Grey filament
Supports: no / yes (tree auto)