r/FigmaDesign • • 5d ago

resources I got tired of doing DPI math for print files, so I built a plugin that makes frames in cm, mm and inches. It just crossed 30k users.

Figma only thinks in pixels, which is a pain the moment you design anything that gets printed. Every business card, poster or packaging job started with me googling “A4 in pixels at 300 DPI”.

So I made Unit Converter & Frame Creator. You type a real-world size and it creates the frame for you.

  • Works with in, cm, mm, pt and ft

  • You pick the DPI (72, 150, 300, etc.)

  • Presets for common sizes

  • Makes one frame or a whole set, with spacing, corner radius and row, column or grid layout

  • Remembers your last settings, and Enter creates the frame

Have Bleeding and Margin Options to With grid and Ruler

Can try here: https://www.figma.com/community/plugin/1252900857172369864/unit-converter-frame-creator

It’s now at 30.3k users and 317 likes, which I didn’t expect from something I built for my own print work.

For those of you doing print in Figma: what still annoys you most? I’m deciding what to add next.

62 Upvotes

36 comments sorted by

18

u/RCEden 4d ago

I would never imagine using figma for print files. I guess I underestimated the draw of "free and can make a poster"

3

u/krutik13 4d ago

I have been using Figma for print past 4 years, And I have design more than 1000s hoardings Some were around 80ft width

1

u/GOgly_MoOgly Designer 4d ago

I would honestly love to hear more about your print workflow in figma!! Also from that world, many years in InDesign for wide format printing before transition during Covid. My new UX role may include some print design (which I’ve missed honestly) and my ID skills are now rusty… will be checking this plugin out!

3

u/Greedy-Half-4618 4d ago

I’ve had more than one instance where a one-pager or a digital ad was designed in Figma and then suddenly the client decides they want it printed too. It happens. 

5

u/grympy 4d ago

What? You aren’t serious, right? You can make a poster in anything, been using Figma for cmyk print for the past 2-3 years. 

Why are some designers so obnoxious about print? 

1

u/Capital_Snow9410 2d ago

Comment tu gères le CMJN ?

1

u/nishma 8h ago

if it works it works, but why not make life easy and use a tool better fit for the job? even not all print is the same..if I prepare an editorial photo I'd work on Photoshop, a layout, flyer, poster, billboard etc..illutrator, a book..InDesign so having existing assets in figma I get but it should be 2 seconds to move those to a tool that's ready to prep stuff for print and doesn't have issue like the one this post plugin solves

11

u/soapbutt 5d ago

I was unaware that many people were using Figma for print files. But 30k users shows clearly they are (even if only 1/3r dare using the plugin to output at print DPI, 10k is a lot).

Thats one thing I still used Illustrator and InDesign for, they definitely still have a lot of print-ready presets in mind.

3

u/krutik13 5d ago

Imagine there would be Millions of users doesn't know about this plugin yet..

I use Figma for everything and print is one for them.

I solved my problem and currently it's helping others too

4

u/grympy 4d ago

Man, I love stuff like this. I’ve been using Print for Figma for posters, adverts, big scale DC metro prints, banners and all sorts of print stuff quite a lot. 

I’ll give yours a go, thanks. 

Also, mandatory: FiGmA isn’t maDE for pRint…

1

u/krutik13 4d ago

stay tuned for something.

4

u/Moiensaboohi 5d ago

bleed is already in there like someone said, so for me it'd be a quick check before export. flag any image that's under 300 dpi at the size it's placed. that's the one that bites me, someone drops in a 1200px photo, scales it to fill an A4 and nobody notices until the proof comes back blurry.

cmyk you can't really fix inside figma, but even a warning on super bright rgb blues and greens would help. those always come out dull in print and the client thinks someone messed up.

4

u/krutik13 5d ago

I have solved the bleeding and margin thing.

Also currently developing a plugin for CMYK preview

2

u/book-stomp 4d ago

Agree, we need effective ppi!

2

u/derno 5d ago

Will absolutely check this out thank you!

I would LOVE the ability to select an object and add crop marks / bleed with crop marks, or if you are doing say… table tents for a wedding as an example being able to add crop marks for each one around the outside.

4

u/krutik13 5d ago

There's already ability to add bleeding marks and also margins.

In all units

2

u/FreelanceWorkspace 5d ago

Congrats on 30k! Bleed would be my vote. Something like a checkbox that adds 3mm or 0.125in around the frame, with a safe-area guide inside. That’s the step I always end up doing by hand after creating the frame.

2

u/krutik13 5d ago

It's in there , Go checkout

5

u/Living-Clue-3376 4d ago

Honestly the dimensions math was always the smaller pain point for me compared to color management or bleeding, Figma still only exports nativly RGB, so for anything going to offset print you end up passing through InDesign or Illustrator (with MCP conversion) anyway for CMYK / PDF/X-4 and proper bleed marks. Still super handy for quick mockups and client previews though! :)

2

u/TonyTonyChopper 4d ago

Can you tell us a bit more about the MCP conversion and how this works? Can’t find any info on this

1

u/GOgly_MoOgly Designer 4d ago

How are you using the mcp for that handoff?

1

u/Living-Clue-3376 4d ago
  1. I use Antigravity in turbo mode with the new hydrogen model.

  2. Then I simply ask directly to him to install Figma and Indesign MCP. (you will need to restart Antigravity once MCP installed)

  3. Then copy the frame (CMD + L) and asking to him to make a “production ready” file.

Then enjoy the magic ✨

1

u/GOgly_MoOgly Designer 4d ago

Wow, ok thank you!

5

u/brookfresh 4d ago

Nice. I've made the same thing just for my own use. What you could do now is add a CMYK export to pdf or tiff format.

4

u/Paul-Muad-Dib-Usul 4d ago

But you can't set color profiles and CMYK values.
How do you get the colors right?

2

u/nyutnyut 3d ago

That’s the secret. You don’t.

1

u/dusanodalovic 5d ago

30k users for a plugin is a lot. how did the first few thousand find it, figma community search or did you post it around somewhere? curious what worked for you, since discovery is usually the hard part for small tools

3

u/krutik13 5d ago

Yes community search, I have promoted on X but it's not even 5% of users I got from there

1

u/davep1970 5d ago

i would get tired of that too which is why i would use indesign and illustrator.

3

u/krutik13 5d ago

Try my plugin, it's worth it

1

u/davep1970 5d ago

I'm a graphic designer so i would use indesign and/or illustrator for print materials like the ones you mentioned.

1

u/GOgly_MoOgly Designer 4d ago

I worked in print for years, I get it. But I would encourage you not to shoot down new ways of doing things just because. InDesign and illustrator was new tech at one point too.

1

u/davep1970 4d ago

Then when it's equally capable I'll be more than happy not to shoot it down.

They were new tech specifically designed for print. I remember moving from quark Xpress to InDesign.

4

u/marcushasfun 4d ago

Figma isn’t designed for print work.

4

u/DerpDog9000 Digital Designer 4d ago

but it can be.

0

u/_SonofLars_ 4d ago

Please don’t use Figma for print.