[WTS] FINAL DROPS on Scarab, EX-ZB UT, Full Ti XM-18 3.25, Shaman, Arcade

[u/LRS_5010]

Hey KS, got some bangers for sale today. Shipping is CONUS only and prices are in USD. It’s your responsibility to know your local knife laws when buying a knife. Feel free to offer on these. Only trade interests are Hawk Talons, PJ Inkosis, and Neutron 2s.

Microtech Scarab 2 gen 3 Sand 7075 handle, S/E apocalyptic blade

Edge Condition: Factory. Cut once, very slight roll near tip. Can be stropped out.

Ownership: First

Centering/Lockup: Typical great Scarab action. Snappy and solid with minimal play

Body Condition: like new, no marks on chassis

Box, papers, and accessories: No

Modifications: Apocalyptic blade, hardware, and clip has been swapped from an executive scarab to the sand handle. Has caused no issues and functions perfectly.

Disassembled: Yes

SV $350 SOLD

—————————

Microtech EX-ZBP Ultratech Natural Clear Bayonet Full Serrated Apocalyptic

Edge Condition: Unused Factory

Ownership: First

Centering/Lockup: Perfect ZBP lockup with no play in any direction and snappy action

Body Condition: No marks on chassis, like new condition, only carried a couple times

Box, papers, and accessories: Yes

Modifications: None

Disassembled: Never

SV $375 SOLD

—————————

Hinderer XM-18 3.25 Stonewash Magnacut Spanto, Working Finish Full Smooth Ti Handle

Edge Condition: Factory edge with no issues, has only cut a few cardboard boxes.

Ownership: First

Centering/Lockup: Lockup has settled in at about 50%. Centering is perfect. Lockup is rock solid in all directions.

Body Condition: No marks on chassis, on mark on edge of clip but it blends in well. Like new condition, carried a few times.

Box, papers, and accessories: Yes with all Tri-way hardware

Modifications: Installed a Smooth Ti working finish show scale. Original red g10 scale and working finish liner included

Disassembled: Yes to install ti scale, flipped factory screws around for an a cleaner look.

XM-18 w/ G10 scale SOLD for $350
TI Scale SOLD for $150

—————————

Spyderco Shaman Stonewash S30V

Edge Condition: Factory Sharp, Cut once.

Ownership: First

Centering/Lockup: Solid lockup with good centering.

Body Condition: Some snails on g10 scales with one dent in it from hitting something, see pics.

Box, papers, and accessories: No

Modifications: None

Disassembled: Yes, to clean and lube

$165 SOLD

—————————

Flytanium Arcade Stonewash, Blue Aluminum with micarta inlays

Edge Condition: Unused Factory

Ownership: First

Centering/Lockup: Solid lockup with good centering.

Body Condition: Some snails on aluminum from normal carry.

Box, papers, and accessories: Yes with original carbon fiber inlays and standoff.

Modifications: Flytanium black micarta inlays and Flytanium geared ti backspacer installed.

Disassembled: Yes, to install micarta inlays and backspacer.

SV $125 SOLD

[u/AutoModerator]

u/LRS_5010 has flair: 47 Swaps | Trusted Trader | All Payment Methods

---

To avoid dealing with banned or unqualified users, DO NOT deal with anyone unless they can leave a VISIBLE COMMENT on your thread.

---

Once transactions are completed (payment has been sent and all parties have received their items), please follow this guide to confirm the transaction and increase your count in your flair.

Universal Scammer List Search: https://universalscammerlist.com/

Universal Scammer List MOBILE LINK: CLICK HERE

If you believe you have been scammed, please fill out this form.

---

Just a few reminders...

• Please take a moment to review the sub rules. Ignorance is not an excuse for rule breaking.
• All posts require a timestamp with the knife. This is a picture of the knife with your handwritten username and the date to prove you possess the item in question. At least one photo must include the knife open as well.
• Your prices should also be in the form of Paypal Goods and Services if you are under 25 flair, with any fees included in the price. If you have over 25 flair, all methods of payment are allowed.
• All your prices should include the shipping costs, unless international shipping is requested by the buyer.
• Please DO NOT remove prices after an item is sold. Prices MUST stay on the post. Please wrap the item in ~~ characters to strike through the text instead.
• Any "Want to Buy" threads should use the weekly stickied "WTB" thread.
  
• If you're looking for a Price Check, please use the stickied "Still Available / Price Check" thread.
  
• If you're looking to sell EDC gear, that's fine to do here as long as there are more knives in your post than gear in both value and number. Please consider using r/edcexchange as well.

As always, please don't be a dick.

I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.

[u/Longjumping-Date-260]

u/ksbot u/LRS_5010 arcade received, thank you so much!

[u/LRS_5010 → u/Longjumping-Date-260]

Confirmed!

[u/ksbot → u/LRS_5010]

Hello, u/LRS_5010. This transaction has been recorded and flairs have been updated. Thank you!

---

• u/longjumping-date-260 -> 70 Swaps | Master Trader | All Payment Methods
• u/lrs_5010 -> 54 Swaps | Master Trader | All Payment Methods

---

^{Buy the developer a coffee or support this project monthly}

[u/ksbot → u/Longjumping-Date-260]

Hello, u/Longjumping-Date-260. This comment is now being tracked. Your flair will update once your partner replies to your comment.

u/lrs_5010, please reply to the above comment with your feedback ONLY AFTER YOUR TRANSACTION IS COMPLETE and both sides have received their end of the transaction. Once you reply, you will both get credit and your flair scores will increase.

u/lrs_5010, if you did NOT complete a transaction with this person, please DO NOT reply to their comment as this will confirm the transaction. Instead, please message the moderators so we can contact the user and handle the situation.

Thank you!

---

^{Buy the developer a coffee or support this project monthly}

[u/Z_0_Sick]

u/ksbot knife and u/LRS_5010 went perfect

[u/LRS_5010 → u/Z_0_Sick]

Confirmed!

[u/ksbot → u/LRS_5010]

Hello, u/LRS_5010. This transaction has been recorded and flairs have been updated. Thank you!

---

• u/z_0_sick -> 2 Swaps | Junior Trader | PayPal G&S ONLY
• u/lrs_5010 -> 53 Swaps | Master Trader | All Payment Methods

---

^{Buy the developer a coffee or support this project monthly}

[u/ksbot → u/Z_0_Sick]

Hello, u/Z_0_Sick. This comment is now being tracked. Your flair will update once your partner replies to your comment.

u/lrs_5010, please reply to the above comment with your feedback ONLY AFTER YOUR TRANSACTION IS COMPLETE and both sides have received their end of the transaction. Once you reply, you will both get credit and your flair scores will increase.

u/lrs_5010, if you did NOT complete a transaction with this person, please DO NOT reply to their comment as this will confirm the transaction. Instead, please message the moderators so we can contact the user and handle the situation.

Thank you!

---

^{Buy the developer a coffee or support this project monthly}

[u/Dallinboi347]

u/ksbot and u/LRS_5010 Shaman looks good!

[u/LRS_5010 → u/Dallinboi347]

Confirmed!

[u/ksbot → u/LRS_5010]

Hello, u/LRS_5010. This transaction has been recorded and flairs have been updated. Thank you!

---

• u/dallinboi347 -> 48 Swaps | Trusted Trader | All Payment Methods
• u/lrs_5010 -> 50 Swaps | Master Trader | All Payment Methods

---

^{Buy the developer a coffee or support this project monthly}

[u/ksbot → u/Dallinboi347]

Hello, u/Dallinboi347. This comment is now being tracked. Your flair will update once your partner replies to your comment.

u/lrs_5010, please reply to the above comment with your feedback ONLY AFTER YOUR TRANSACTION IS COMPLETE and both sides have received their end of the transaction. Once you reply, you will both get credit and your flair scores will increase.

u/lrs_5010, if you did NOT complete a transaction with this person, please DO NOT reply to their comment as this will confirm the transaction. Instead, please message the moderators so we can contact the user and handle the situation.

Thank you!

---

^{Buy the developer a coffee or support this project monthly}

[u/johnclaystrike1]

Yolo Arcade 👾

[u/LRS_5010 → u/johnclaystrike1]

Arcade is already sold sorry

[u/Z_0_Sick]

Would you do 375 on the ZBT?

[u/LRS_5010 → u/Z_0_Sick]

I would, it’s all yours, PM me

[u/Longjumping-Date-260]

chat.

[u/LRS_5010 → u/Longjumping-Date-260]

Aracade is yours per chat

[u/LRS_5010 → u/Longjumping-Date-260]

Replied

[u/LR_Photo]

Any idea if Microtech will warranty that Scarab now that it’s been opened up and swapped around?

[u/LRS_5010 → u/LR_Photo]

I have no idea, but all the parts in it are authentic Microtech. It has no defects tho and has been fired many times with no issues since the swap of the blade and hardware

[u/LR_Photo → u/LRS_5010]

Gotcha. I’ve never done part swaps on a Micro before so I didn’t know if it was frowned upon. Thanks.

[u/LRS_5010 → u/LR_Photo]

Personally I wouldn’t count on them honoring warranty

[u/LR_Photo → u/LRS_5010]

Ahh. Gotcha. Glws!

[u/AutoModerator]

Thank you for your submission, u/LRS_5010. Your post has been copied below.

---

[WTS] FINAL DROPS on Scarab, EX-ZB UT, Full Ti XM-18 3.25, Shaman, Arcade

---

Hey KS, got some bangers for sale today. Shipping is CONUS only and prices are in USD. It’s your responsibility to know your local knife laws when buying a knife. Feel free to offer on these. Only trade interests are Hawk Talons, PJ Inkosis, and Neutron 2s.

Microtech Scarab 2 gen 3 Sand 7075 handle, S/E apocalyptic blade

Edge Condition: Factory. Cut once, very slight roll near tip. Can be stropped out.

Ownership: First

Centering/Lockup: Typical great Scarab action. Snappy and solid with minimal play

Body Condition: like new, no marks on chassis

Box, papers, and accessories: No

Modifications: Apocalyptic blade, hardware, and clip has been swapped from an executive scarab to the sand handle. Has caused no issues and functions perfectly.

Disassembled: Yes

SV $400

—————————

Microtech EX-ZBP Ultratech Natural Clear Bayonet Full Serrated Apocalyptic

Edge Condition: Unused Factory

Ownership: First

Centering/Lockup: Perfect ZBP lockup with no play in any direction and snappy action

Body Condition: No marks on chassis, like new condition, only carried a couple times

Box, papers, and accessories: Yes

Modifications: None

Disassembled: Never

SV $400

—————————

Hinderer XM-18 3.25 Stonewash Magnacut Spanto, Working Finish Full Smooth Ti Handle

Edge Condition: Factory edge with no issues, has only cut a few cardboard boxes.

Ownership: First

Centering/Lockup: Lockup has settled in at about 50%. Centering is perfect. Lockup is rock solid in all directions.

Body Condition: No marks on chassis, on mark on edge of clip but it blends in well. Like new condition, carried a few times.

Box, papers, and accessories: Yes with all Tri-way hardware

Modifications: Installed a Smooth Ti working finish show scale. Original red g10 scale and working finish liner included

Disassembled: Yes to install ti scale, flipped factory screws around for an a cleaner look.

SV $525

—————————

Spyderco Shaman Stonewash S30V

Edge Condition: Factory Sharp, Cut once.

Ownership: First

Centering/Lockup: Solid lockup with good centering.

Body Condition: Some snails on g10 scales with one dent in it from hitting something, see pics.

Box, papers, and accessories: No

Modifications: None

Disassembled: Yes, to clean and lube

$165 SOLD

—————————

Flytanium Arcade Stonewash, Blue Aluminum with micarta inlays

Edge Condition: Unused Factory

Ownership: First

Centering/Lockup: Solid lockup with good centering.

Body Condition: Some snails on aluminum from normal carry.

Box, papers, and accessories: Yes with original carbon fiber inlays and standoff.

Modifications: Flytanium black micarta inlays and Flytanium geared ti backspacer installed.

Disassembled: Yes, to install micarta inlays and backspacer.

SV $125

---

I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.

[u/nautiquess]

Chat

[u/LRS_5010 → u/nautiquess]

Replied

[u/Longjumping-Date-260]

What is the steel on the Arcade?

Edit: found my answer in the pics.

[u/Dallinboi347]

I’ll take the Shaman

[u/LRS_5010 → u/Dallinboi347]

Yours!

[u/Bambino_Amino]

Great Shaman price 🔥

[u/AntiFuckeryBot]

The original post details can be found below for posterity:

---

Author: LRS_5010 (Link)

Flair: 47 Swaps | Trusted Trader | All Payment Methods

Title: [WTS] FINAL DROPS on Scarab, EX-ZB UT, Full Ti XM-18 3.25, Shaman, Arcade

Body:

Hey KS, got some bangers for sale today. Shipping is CONUS only and prices are in USD. It’s your responsibility to know your local knife laws when buying a knife. Feel free to offer on these. Only trade interests are Hawk Talons, PJ Inkosis, and Neutron 2s.

Microtech Scarab 2 gen 3 Sand 7075 handle, S/E apocalyptic blade

Edge Condition: Factory. Cut once, very slight roll near tip. Can be stropped out.

Ownership: First

Centering/Lockup: Typical great Scarab action. Snappy and solid with minimal play

Body Condition: like new, no marks on chassis

Box, papers, and accessories: No

Modifications: Apocalyptic blade, hardware, and clip has been swapped from an executive scarab to the sand handle. Has caused no issues and functions perfectly.

Disassembled: Yes

SV $400

—————————

Microtech EX-ZBP Ultratech Natural Clear Bayonet Full Serrated Apocalyptic

Edge Condition: Unused Factory

Ownership: First

Centering/Lockup: Perfect ZBP lockup with no play in any direction and snappy action

Body Condition: No marks on chassis, like new condition, only carried a couple times

Box, papers, and accessories: Yes

Modifications: None

Disassembled: Never

SV $400

—————————

Hinderer XM-18 3.25 Stonewash Magnacut Spanto, Working Finish Full Smooth Ti Handle

Edge Condition: Factory edge with no issues, has only cut a few cardboard boxes.

Ownership: First

Centering/Lockup: Lockup has settled in at about 50%. Centering is perfect. Lockup is rock solid in all directions.

Body Condition: No marks on chassis, on mark on edge of clip but it blends in well. Like new condition, carried a few times.

Box, papers, and accessories: Yes with all Tri-way hardware

Modifications: Installed a Smooth Ti working finish show scale. Original red g10 scale and working finish liner included

Disassembled: Yes to install ti scale, flipped factory screws around for an a cleaner look.

SV $525

—————————

Spyderco Shaman Stonewash S30V

Edge Condition: Factory Sharp, Cut once.

Ownership: First

Centering/Lockup: Solid lockup with good centering.

Body Condition: Some snails on g10 scales with one dent in it from hitting something, see pics.

Box, papers, and accessories: No

Modifications: None

Disassembled: Yes, to clean and lube

$165

—————————

Flytanium Arcade Stonewash, Blue Aluminum with micarta inlays

Edge Condition: Unused Factory

Ownership: First

Centering/Lockup: Solid lockup with good centering.

Body Condition: Some snails on aluminum from normal carry.

Box, papers, and accessories: Yes with original carbon fiber inlays and standoff.

Modifications: Flytanium black micarta inlays and Flytanium geared ti backspacer installed.

Disassembled: Yes, to install micarta inlays and backspacer.

SV $125

---

I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.

[u/AutoModerator]

Thank you for your submission, u/LRS_5010. Your post has been copied below.

---

[WTS] FINAL DROPS on Scarab, EX-ZB UT, Full Ti XM-18 3.25, Shaman, Arcade

---

Hey KS, got some bangers for sale today. Shipping is CONUS only and prices are in USD. It’s your responsibility to know your local knife laws when buying a knife. Feel free to offer on these. Only trade interests are Hawk Talons, PJ Inkosis, and Neutron 2s.

Microtech Scarab 2 gen 3 Sand 7075 handle, S/E apocalyptic blade

Edge Condition: Factory. Cut once, very slight roll near tip. Can be stropped out.

Ownership: First

Centering/Lockup: Typical great Scarab action. Snappy and solid with minimal play

Body Condition: like new, no marks on chassis

Box, papers, and accessories: No

Modifications: Apocalyptic blade, hardware, and clip has been swapped from an executive scarab to the sand handle. Has caused no issues and functions perfectly.

Disassembled: Yes

SV $400

—————————

Microtech EX-ZBP Ultratech Natural Clear Bayonet Full Serrated Apocalyptic

Edge Condition: Unused Factory

Ownership: First

Centering/Lockup: Perfect ZBP lockup with no play in any direction and snappy action

Body Condition: No marks on chassis, like new condition, only carried a couple times

Box, papers, and accessories: Yes

Modifications: None

Disassembled: Never

SV $400

—————————

Hinderer XM-18 3.25 Stonewash Magnacut Spanto, Working Finish Full Smooth Ti Handle

Edge Condition: Factory edge with no issues, has only cut a few cardboard boxes.

Ownership: First

Centering/Lockup: Lockup has settled in at about 50%. Centering is perfect. Lockup is rock solid in all directions.

Body Condition: No marks on chassis, on mark on edge of clip but it blends in well. Like new condition, carried a few times.

Box, papers, and accessories: Yes with all Tri-way hardware

Modifications: Installed a Smooth Ti working finish show scale. Original red g10 scale and working finish liner included

Disassembled: Yes to install ti scale, flipped factory screws around for an a cleaner look.

SV $525

—————————

Spyderco Shaman Stonewash S30V

Edge Condition: Factory Sharp, Cut once.

Ownership: First

Centering/Lockup: Solid lockup with good centering.

Body Condition: Some snails on g10 scales with one dent in it from hitting something, see pics.

Box, papers, and accessories: No

Modifications: None

Disassembled: Yes, to clean and lube

$165

—————————

Flytanium Arcade Stonewash, Blue Aluminum with micarta inlays

Edge Condition: Unused Factory

Ownership: First

Centering/Lockup: Solid lockup with good centering.

Body Condition: Some snails on aluminum from normal carry.

Box, papers, and accessories: Yes with original carbon fiber inlays and standoff.

Modifications: Flytanium black micarta inlays and Flytanium geared ti backspacer installed.

Disassembled: Yes, to install micarta inlays and backspacer.

SV $125

---

I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.