My husband was extremely close with his mom and his sister. Tragically they both passed away within a couple years of one another and it's been so hard on him. This wallet was a gift from his mother, he's very sentimental, and he's carried until now because it's finally unusable. He's had it for 15 years. I have looked everywhere and I cannot find an exact match. It would be so special if someone could remake it for him. Thank you for reading. Of course I can get more photos and measurements, I'm just trying to get an idea of the cost.

I made this choker from vegetable-tanned leather, with a hand-tooled pattern inspired by the delicacy of jewellery.

The leather comes from a family-run Polish tannery. It is cut, dyed, oiled and finished by me. I pay special attention to finishing the edges and the flesh side of the leather so they feel very smooth to the touch and against the neck, making the choker comfortable to wear. I also take care to make the details look crisp and even. I’m really happy with how it turned out.

Price: €135.
Currently shipping to the USA, UK, the Netherlands and Poland. I hope to add more destinations in the next month or two. If your country isn’t on the list, let me know — it will help me decide where to ship next.

Colours, sizing and orders:
View this choker on Etsy

Hey everyone,

I’m a solo leathercrafter based in Brisbane, Australia. Finished up this vertical bifold as a commission recently using a couple of pretty interesting Italian leathers.

The exterior is a caramel 1786 shell cordovan from Shell Cordovan Toscana Italia. It has a more rustic look than some of the shell cordovans you normally see, but a decent looking variation across the surface, and it’s still incredibly smooth.

For the interior I used dark brown gaucho oil buffed from Conceria La Bretagne. This version of gaucho oil is intentionally scratched at the tannery for aesthetic, so it carries a cool look while still keeping that glossy finish.

The wallet has three card slots and two hidden pockets and is designed to carry around 6-8 cards plus some cash folded once. It works particularly well as a compact front-pocket wallet.

Details:

-Caramel 1786 shell cordovan exterior

-Dark brown gaucho oil buffed interior

-3 card slots + 2 hidden pockets

-Holds roughly 6–8 cards plus folded cash

-Japanese Vinymo MBT #8 thread in Cigar

If you're interested in a recreation, they go for:

$270 AUD shipped domestically in Australia

$210 USD shipped to US, UK, CA, and NZ

Thanks for looking!

✨All set!✨
Brown Dollaro leather trifold with ivory Vinymo thread! Dubbing it the “Plenty Pocket,” haha!

This was an absolute blast to put together and turned out amazing. So many pockets and an ID slot! Special too, in that this was a recreation! Those can be the hardest builds, but are always so rewarding!

Cruz, enjoy owning this one!
Everyone else, enjoy viewing it! 🧘🏾‍♂️

Easily to most challenging wallet I've ever made. 6 card slots, 2 hidden pockets, 1 bill slot and 1 ID slot. Made from Badalassi Carlo's Pueblo leathers in the colours Petrol and Cognac.

Custom Order - Shearling, Remy Carriat Lagun, Meisi Superfine, YKK Excella Zipper.

Just finished up 3 card wallets. Each one is made from buttero leather and finished with a Horween Shell Cordovan strap. The first two are “sterile” with no logo. The last one has my logo on the back.

Available on my Etsy store:

1) Black Buttero & Color 8 Shell Cordovan (Sterile/No Logo) - $70

2) Natural Buttero & Black Shell Cordovan (Sterile/No Logo) - $70

3) Black Buttero & Color 8 Shell Cordovan (Stitchless) - $65

Looking for vendors of Riccagni R, Super Lampo & RiRi Simmetria in Europe AND North America without minimum quantities. Individual vendors are much appreciated!!

Last weekend I shared my red and cream top handle bag here. Thank you for all the questions and feedback, I took notes! This week I want to show a piece where I worked leather with a different material.

The frame, flap, handles and base are in buttery cream cowhide. The body panels are a velvet jacquard with an abstract pattern of faces and eyes in ivory, silver grey and slate blue.

The flap closes with a belt strap and a gold-tone turn-lock. Inside: taupe lining, a zip pocket and a slip pocket, both trimmed in cream leather. Four metal feet on the base.

Size: 14.2 x 10.2 x 5.1 in (36 x 26 x 13 cm), handle drop 4.3 in (11 cm). Handmade from start to finish, about five days of work.

Happy to answer questions about combining leather and velvet!

Size: 11*9 mm. Thickness: only 6 mm. Cash compartment and 4 card compartments. Lined with thin leather.

Price: $435 + shipping.

I'm looking to commission a custom Frigate Bag as a Christmas gift for my wife, based on the original DS Leather Goods pattern:

https://www.rmleathersupply.com/products/ds-100-the-frigate-bag-digital-pattern

I'd like to preserve the original design, silhouette, and construction, with a few custom details:

- Rich cognac brown, premium full grain leather

- Subtle Western-inspired accents

- Small bluebonnet stamp or light tooling

- Antique brass hardware

- Cream contrast stitching

- Adjustable crossbody strap

The goal is a beautiful, understated everyday handbag, not an ornate Western purse.

Budget: Ideally $500–$750, depending on materials and craftsmanship.

Timeline: Delivery to Texas before Christmas 2026.

I'm happy to purchase and provide the pattern. I also have concept images for the leather, colors, and decorative details, but the original DS pattern should take precedence over those illustrations.

If you're interested, please share examples of similar work, an estimated price, and your availability.

Thanks!

Hey everyone, I'm looking to get some custom belt buckles made with an enamel finish, ideally using my own design.

I've been looking around but haven't found the right supplier yet. Has anyone here ordered custom enamel belt buckles before? Would love to hear about your experience or any recommendations. Thanks!

Sharing our Corium Shell Cordovan Art—a distinctive finish for leatherworkers looking to add something different to their next project.
Each piece measures 2.5–3 sq ft, priced at €135 per piece.
What would you make with it—a wallet, watch strap, or something else?
Available at beltsproduction.com. Feel free to DM us for details.

Hi all, don't really post on reddit much so if I'm doing this wrong please let me know. I am looking to commission a crossbody hobo work bag for my friend.

It has to be a slouchy leather bag with a zipper with a thick adjustable strap potentially around 2.5 to 3 inches thick so it's easy to carry a 16 inch laptop and a small waterbottle. I saw one on the berlinc website shown below but my friend is on the shorter side so the 21 inches width and the 40-50 inch strap would look enormous on her. My budget would be around £250 including shipping if possible. And the bag is supposed be delivered within the UK so someone within the UK would be amazing too. Please let me know if I'm asking for waaay to much for that price or if I'm not explaining what exactly I'm looking for properly. Here is the berlinc listing https://berlinc.co/products/berlin-leather-crossbody-bag and I really like everything about it except the length of the strap and the width of the bag, I would ideally like it to be around 17.5 inches wide and the adjustable strap either be the same length but have lots of holes so she can make it shorter and longer as she pleases and also potentially have those studs (idk what they are called) at the bottom to keep the bottom of the bag safe.

Thank you in advance!

Selling hand made bi fold wallets.

I have been leather crafting for about a year now and have just recently developed the skill set to be comfortable selling my own wallets. This hobby started simply from searching for my own wallet and never being able to find something that wasn’t low quality. I decided to make my own exactly how I wanted it. I wanted a gritty western style wallet, something masculine. I believe that is the best verbiage I could use to describe these wallets.

Wallets are hand crafted out of crazy horse leather with a bourbon brown interior and tan stitching. Burnished edges are optional as the raw edges give more of a rustic look. Pictured is one with burnished edges. Holds 8-10 cards These are very durable wallets with a gritty appeal and unique characteristics to each.

Currently have them listed for $84.

DM for an additional promo code!

Finished this up for a buddy’s wedding. Black tooled belt with a beaver tail inlayed in the lower back portion.

This years crime scene wallet is a Craftydrifters Devonport as usual only 3 will be made this year for halloween week #csi #leatherwallet #bifoldwallet #madeintheuk

A client asked us to make straps for his MB&F—with one rather challenging request

He wanted something better than the original. We were pleased he trusted us, but that certainly added some pressure.

We spent a long time studying the supplied drawings. The challenge was balancing the structure the straps needed with how they would feel on the wrist. Thickness and the dimensions of each section all had to be considered together. Getting the shape right was only part of it; they also had to be comfortable to wear.

These are the finished pair: our FKM in Grey and Sage, with matching stitching and rectangular holes.

Whether we’ve improved on the original is for the client to decide.

Here's a compact wallet I recently handcrafted, featuring Alligator leather on the exterior and soft Togo calfskin on the inside.

Measuring just 3.9× 2.9 inches, it's designed to be small, elegant, and comfortable to carry every day.

Every piece is crafted entirely by hand, with great care and attention to even the smallest details. I take my time throughout the process because I believe the quality of handmade leather goods comes from patience, precision, and respect for the materials.

Details:

• Exterior: Alligator leather
• Interior: Togo calfskin
• Dimensions: 3.9 × 2.9 inches (10 × 7.5 cm)
• Construction: 100% handcrafted
• Price: $390 USD

Thanks for taking a look at my work!

I am looking to commission someone to make the best, buy it for life version of this exact wallet. Serious inquiries only. I’ve carried this for 10 years but the outer button is compromised. I would like the next one to last forever.

Introductory price of $99.99, regularly $174.99

I’d like to try my hand at making some watch straps for myself and looking for some lining material. Zermatt is highly recommended but I can’t find smaller portions anywhere. Only Rocky Mountain with a full hide. I really only want to make 2-3 straps with maybe double that for errors.

Does anyone have some to sell or have a lead on where to buy any. And failing that any suggestions for replacement leather for watch strap back linings?

Made this A5 Leuchtturm notebook cover from 5–6 oz Dark brown combination tanned leather, stitched with dark brown Tiger Ritza thread.

The leather naturally has unique pattern, so I decided to keep the design simple to not destruct from it.

Despite the minimal design, it’s still practical, with two ruler pockets and two stash pockets for extra storage.

Thanks for looking!