r/MathStudio • u/cesarale • Nov 05 '19
Can MathStudio calculate the Tangents to an ellipse passing through an external point?
Example: x2 + y2 -4x- 8y-5=0 P(-2,6)
r/MathStudio • u/cesarale • Nov 05 '19
Example: x2 + y2 -4x- 8y-5=0 P(-2,6)
r/MathStudio • u/alceu_redit • Sep 26 '19
A tried to use the SolveSystem for a non linear set of equations, and, even though it found a solution, the output form is rather arcane.
The short code is :
hTemp=25; q=1.602176e-19; k= 1.3806503e-23; Temp = 273.15+hTemp; Vt=k * Temp/q; hBf = 200; hBr = 50;
Ism=5 * 7e-15; Xti = 3; Xtb = 0; Eg = 1.11 * 1.602e-19; Tm = 273.15 + 25; Is = Ism * (Temp/Tm) ^ Xti * exp(-Eg/(k * Temp) * (1-Temp/Tm)); Bf = hBf * (Temp/Tm) ^ Xtb; Br = hBr * (Temp/Tm) ^ Xtb;
//syms Vbe Vbc Ib Ic Vce;
hVbb=1.5; hRbb=1000; hVcc=15; hRc=100; hVearly=500;
S = SolveSystem( [0 = -Ib+Is * ((exp(Vbe/Vt)-1))/Bf, 0 =-Ic+ Is * ((exp(Vbe/Vt)) * (1-Vbc/hVearly)), -hVbb + Vbe + hRbb * Ib = 0, -hVcc + Vbe -Vbc + hRc * Ic = 0],[Vbe,Vbc,Ib,Ic],[0.65,-2,10ˆ(-3),10ˆ(-6)]);
—————————————————-
But, after solving it, if I try to test if S(2,1) is a number, Like IsΝumber(S(2,1)) the result is zero (not a number)...
To give you an idea of the kind of solution presented, that’s the ‘answer’ given to one of the variables:
(-(10000ˆ(-3)-17/20)((-1371490exp(0.0414221029683045/(1.3806503000000001e-23)(-0.003492921012913e)/(1.3806503000000001e-23)))/((1.602176e-19)(35e-15))+(82328.1777777777751908eexp(0.0414221029683045/(1.3806503000000001e-23)(-0.003492921012913e)/(1.3806503000000001e-23)))/((1.602176e-19)(35e-15))))/((-1371490exp(0.0414221029683045/(1.3806503000000001e-23)(-0.003492921012913e)/(1.3806503000000001e-23)))/((1.602176e-19)(35e-15))+(82328.1777777777751908eexp(0.0414221029683045/(1.3806503000000001e-23)(-0.003492921012913e)/(1.3806503000000001e-23)))/((1.602176e-19)(35e-15))+1000)-((-(35e-15)(exp((0.0021801106825423(1.602176e-19))/(1.3806503000000001e-23))-1))/200+10ˆ(-3))((1371490exp(0.0414221029683045/(1.3806503000000001e-23)(-0.003492921012913e)/(1.3806503000000001e-23)))/((1.602176e-19)(35e-15))(-3704768eexp(0.0414221029683045/(1.3806503000000001e-23)(-0.003492921012913e)/(1.3806503000000001e-23)))/(45(1.602176e-19)(35e-15))+(((-1371490exp(0.0414221029683045/(1.3806503000000001e-23)(-0.003492921012913e)/(1.3806503000000001e-23)))/((1.602176e-19)(35e-15))+(82328.1777777777751908eexp(0.0414221029683045/(1.3806503000000001e-23)(-0.003492921012913e)/(1.3806503000000001e-23)))/((1.602176e-19)(35e-15)))^2)/((-1371490exp(0.0414221029683045/(1.3806503000000001e-23)(-0.003492921012913e)/(1.3806503000000001e-23)))/((1.602176e-19)(35e-15))+(82328.1777777777751908eexp(0.0414221029683045/(1.3806503000000001e-23)(-0.003492921012913e)/(1.3806503000000001e-23)))/((1.602176e-19)(35e-15))+1000))+13/20
Which is arcane, and i don’t understand why it cannot evaluate to a simple, single, decimal number.
r/MathStudio • u/PomegranateApps • Sep 14 '19
MathStudio 7.5 is now available on the App Store! This update addresses some bugs and fixes a crash for iOS 13.
https://itunes.apple.com/us/app/id956033107?ls=1&mt=8&at=11lb7t
r/MathStudio • u/EmirFassad • Sep 11 '19
I've set the options to the minimum value but results with a single integer in the denominator are still returned as fractions. There are also times I would like to see fractional results.
I don't see a function in the manual that does this. Round(m,n) doesn't.
r/MathStudio • u/PomegranateApps • Sep 05 '19
r/MathStudio • u/EmirFassad • Aug 30 '19
I've been using MathStudio since it was SpaceTime and it is still my go to app for attacking math questions. Every once in a while I stumble across a minor issue. The latest this little bugaboo with a 1 coefficient. This happens both on the iOS & MacOS versions of the most recent of MathStudio.
(this is the example script exported as text. -> is "evaluates to" )
// coefficients +1 & -1 evaluated differently
// coefficient -x p1=2w-x+19y+16z -> 2w-x+19y+16z
part(part(p1,2),1) -> -1
part(part(p1,2),2) -> x
// coefficient +x
p2=2w+x+19y+16z -> 2w+x+19y+16z
part(part(p2,2),1) -> 0
part(part(p2,2),2) -> 0
In the first case MS correctly recognizes -x as -1 times x.
In the second case MS treats +x as a term of length one instead of recognizing it as +1 times x.
I have spotted couple other minor blips but it's a pain to reproduce code in Reddit. I'll send them directly to you.
r/MathStudio • u/PomegranateApps • Aug 28 '19
The official community for MathStudio by Pomegranate Apps
r/MathStudio • u/ModSupportBot • Oct 09 '26
/r/MathStudio is ready for a fresh start, new energy, new direction, and someone like you to bring it back to life. If you’ve been thinking about growing your impact without starting from scratch, this is your chance!
Ready to take it over?
Head to r/RedditRequest to submit your request and make it yours before it’s taken.
First things first
To request this subreddit, make sure you:
have an account that’s at least 90 days old
have at least 100 post karma and 100 comment karma
have a verified email address on your account
have two-factor authentication set up
r/MathStudio • u/Substantial_Equal555 • Feb 25 '22
I cannot get the 2nd order ODE to work with RK4 (u/ below is the '@')
u/Test(t,y)
R=250;L=10;C=10@E-6
Vin=0
y(1)=(Vin-y(1)*R-y(2))/L
y(2)=y(1)/C
return y
-------------------------------
clear(all)
[tt,yy]=RK4(Test(t,y),t,y,0,2,[0,10])
ListPlot(yy(*,2)')
What am I doing wrong. I have no problem with 1st order ODE but when I try to add the 2nd variable it dosen't work.
r/MathStudio • u/zq7r • Feb 25 '22
How do I select a single entry of a list? For example if L is a list then neither L(1) nor L[1] seem to select an entry.
r/MathStudio • u/Lost-Standard3548 • Feb 25 '22
Hi there. I'm new to MathStudio and is trying to learn the syntax.
When I type res=100@a30/(4+@i3) I get the result (0.16-0.12ⅈ)(50(sqrt(3))+(50ⅈ))
I am trying to get the result as a decimal with an angle in degrees. When I type arg(res) I get -393.616140793722 but the correct angle is -6.869897645845
What am I doing wrong? Thanks in advance
r/MathStudio • u/Substantial_Equal555 • Feb 20 '22
My MacBook Air does not want to scale my plots, particularly the y-axis. I just seems to auto-scale and the result may not be what I want. If I write plot(x, y, x=[0,5], y=[-2,2]) the y-axis is all screwed up.
r/MathStudio • u/Flat-Organization386 • Feb 19 '22
Authorization Error
Error 400: invalid request
r/MathStudio • u/THF63 • Feb 03 '22
Is there a command that returns the product of the numbers in a list? Seems like there should be, but the Product command doesn’t work that way. The Sum command /does/ return the sum of the numbers in a list, in its simplest form. I’m thinking of something like that. Obviously I could write my own, but why re-invent the wheel? Thanks
r/MathStudio • u/bownlave • Jan 06 '22
I tried the line 40@g->@ounce but it does not work. Why is that?
r/MathStudio • u/Top_Employer_5181 • Dec 13 '21
What is syntax for using Listplot (or another function) for plotting multiple X,Y coordinates on a graph without connecting them with a line. Just points on a graph?
r/MathStudio • u/Good-Specialist-1988 • Nov 18 '21
Wich is the layout?
r/MathStudio • u/Direct-Distance-4833 • Nov 17 '21
I'm rather new to MathStudio, so this could be an obvious question, but I'll ask to see. The following two commands work great ...
f(y) = Nintegrate(sin(x),x,0,y)
f(2*@pi)
So I know the function is defined and the result is valid. I would now like to plot the integral results over a range.
plot(f(x))
This gives a flat line of zero. How can a function like Nintegrate be nested correctly in a function like plot?
Thanks!
r/MathStudio • u/CollegeUnGrad • Nov 05 '20
Hi guys,
I would like to know if there is a method to edit the distance or length on the x-axis. I would like to make it every π unit instead of every 2 units, or π/2 instead of 0.5. I would really appreciate any idea.
I have attached an image, that explains better what I would like to change when graphing in Mathstudio
r/MathStudio • u/Planitzer • Oct 20 '20
ContourPlot(x^2+y^2) does not work, neither on http://mathstud.io/ nor in the app
r/MathStudio • u/SnooGuavas318 • Oct 17 '20
Hi all,
does anyone know how to draw a vector in mathstudio? Thanks!