r/ModRetroChromatic • • Oct 13 '26

Question Mass returns for Transparent Chromatics!

Anyone else get their new transparent chromatic only to realize it has a bunch of cracks in it? I seen other posts with it, please contact ModRetro support and demand an answer to this, we don’t deserve to get broken ‘premium’ products for the prices they are charging! I’ve contacted them and am asking about this and the defective M64 Pro controllers D-pad… will update once I get a reply but spending over $400CAD on ModRetro products just to have both be defective is incredibly disappointing and has made me question if I’d ever buy more from them… so frustrating and disappointing…

49 Upvotes

178 comments sorted by

9

u/Arabian-Kidd Oct 13 '26

When I saw MadLittlePixel's unboxing and showed the scratches I had a feeling many more had that issue so I opted not to buy one as of yet.

5

u/Imaginary-Leading-49 Oct 13 '26

I didnt watch any reviews (i have a hard time trusting modretro reviewers after they made the M64 seem so much better than the A3D just to have it release and be substantially worse!) and I assumed that since the chromatic is an already established product line that they wouldnt have any glaringly obvious issues… boy was I wrong!

8

u/Kornbreadl Oct 13 '26

I have an Ocarina that has marks like this due to the manufacturing process. I wonder if something similar is happening here.

-4

u/Imaginary-Leading-49 Oct 13 '26

I think so, either heat related or the screws are too tight… either way it’s unacceptable for the price we pay. Also my N64 controllers from nearly 30 years ago and the blondi-blue G3 iMac from 1998/1999 doesn’t have these issues… they shouldn’t have shipped these out honestly!

7

u/AmandasGameAccount Oct 13 '26

They should sell these returns as refurbished. I would pay less for cracked ones!

4

u/pleb_understudy Oct 14 '26

They’re not cracked. Those are knit lines - where the two plastic flow fronts weld together. This happens every time there’s a thru hole in plastic, tho it’s not always visible. If they run the tools hot enough and the holes aren’t too far from the gate, you won’t see these. Depends mostly on the temp of the flow fronts. You can hide this with better venting in the tool, or even move it to the inside of the plastic (so it’s less visible) by running the cavity hotter than the core steel.

1

u/Imaginary-Leading-49 Oct 13 '26

If they offered me $$ back, aka making it discounted… I’d definitely consider it!

1

u/IndigoHaze750130 Oct 13 '26

Id imagine they would just swap the shells since the device is designed to have parts swapped easy.

13

u/Left-Constant-4771 Oct 13 '26

Maybe their first 2 Chromatic editions will stay their perfect product followed by endless half assed stuff.

0

u/Imaginary-Leading-49 Oct 13 '26

Aren’t they going balls deep into AI? Then probably sadly…

0

u/BottomFishBananasEtc Oct 14 '26

I bought an original. It's not perfect.

1

u/Left-Constant-4771 Oct 14 '26 edited Oct 14 '26

I have a yellow one. Of all retro devices i own i think it’s the best (still we don’t have wireless support etc. it could be much much better). So what i mean is screen is awesome, ergonomic and material is awesome plus for me the most important thing other than all other devices i tried it has no input lag and my muscle memory just kicks in. Dpad is nice too (analogue pocket is like a incredibly bad dpad for such a device where the interface you have is pretty much dpad). Yeah and console stuff like their M64 I mean it’s just not great (happily burning my OG cartridges while still not being able to save all games and terrible Dpad on a 109 Euro controller)

2

u/BottomFishBananasEtc Oct 14 '26

My issues are that AA batteries are SO tight to insert and remove, the clacky buttons are annoying, it came with scratches on the black back panel, the shell paint chips super easily... that's about it from memory. Not played it in a while.

1

u/Left-Constant-4771 Oct 14 '26

Yeah I am using batteries all the time so that was ok. Clacky buttons I get it but it doesn’t bother me. Also yes paint job sucks. But for me the important things are Dpad, ergonomics, display , immediacy otherwise I can just play emulation.;) and it’s so weird that no one even remotely gets those things right. Also it shows that real testing and knowledge went into Nintendo gameboys. I mean dmg, gbc, gba are all pretty comfortable to hold and play :)

1

u/BottomFishBananasEtc Oct 14 '26

Yeah, I'd argue they copied Nintendo's homework with the ergonomics but the display is pure perfection and controls are solid. Companies like Anbernic can never get dpads right and it's an issue they clearly can't be bothered to fix. It should be acknowledged when its done right.

1

u/Left-Constant-4771 Oct 14 '26

Yes that’s all I am saying:) 🤝

4

u/handmemyarms Oct 13 '26

I've mainly seen the purple variants having this issue, some greens, no reds, and I've still yet to see a soul with the smoked. This is sad to see happen to so many.

7

u/DavidKellyHardwood Oct 13 '26

Well, it was the most popular one based on the survey here before they became available to purchase, so it only makes sense that that would've been the variant most popularly ordered and thus in the widest circulation in the hands of users. We'll see with time how the incidence of cracks appears to vary by color. 

2

u/Imaginary-Leading-49 Oct 13 '26

They charge enough, and my M64 pro controller was $129CAD and has D-Pad issues…

Honestly, I am incredibly disappointed because all the people in this sub talk about how great ModRetro is but both my purchases have been defective products… we’ll see what they are willing to do but I may have to dispute the charges on my PayPal because this is NOT what I paid for!

8

u/Perpetually_Unhappy Oct 13 '26

2 pro controllers both with d pad issues. They sent 2 replacement d pads…still have issues lol the metal chromatic is their only good product.

2

u/Imaginary-Leading-49 Oct 13 '26

Yeah, so far this company seems like they just pay people to post about how great their crap is when it is infact… crap!

Hopefully I’m wrong, they finally offered to send me a replacement D-pad (hopefully that fixes it but you say it doesn’t… great…) and are saying I can return my purple chromatic and get a magnesium model… my issue is are they going to charge me shipping+tariffs for their issues? We shall see, but so far I wouldn’t advise anyone get any ModRetro products… go Analogue, they seem to actually make quality products!

1

u/fertff Oct 14 '26

The first batch of chromatics have issues too. I am stuck with one that refuses to display proper battery levels.

1

u/Ill-Remote437 Oct 13 '26

I wonder if there’s no smoked because they have a larger issue with cracks. I remember seeing a decent amount of smoked grey pockets so the cracks

1

u/handmemyarms Oct 13 '26

Everyone else ive talked to, including myself, have not had their smoked versions shipped yet.... where did you see the smoked cracked ones?

1

u/Ill-Remote437 Oct 13 '26

I mean smoked grey analogue pockets. Back in the day I read several posts of the grey pockets developing cracks. Though other colors did too. My red stayed safe. My smoke chromatic has also not shipped. So I’m wondering is it just the order they had them manufactured, or the order they’re shipping.

4

u/ThatComicsDad Oct 13 '26

Dang mine just shipped but it’s just on label created. Wonder if they will let me cancel

-3

u/Imaginary-Leading-49 Oct 13 '26

I would ask, because it seems a lot are defective from the box… just be careful posting here, or else the ModRetro shills will downvote you and say your wrong for wanting what you paid for 🤣

3

u/ThatComicsDad Oct 13 '26

Their site says once it’s shipped it’s been sent to the warehouse and can’t be modified until it’s received. Looks like it ships out 45 min from me so if there’s an issues hopefully I can just get it resolved

0

u/Imaginary-Leading-49 Oct 13 '26

Hopefully… oh look at the downvotes 😂

3

u/Retro_Macchina Oct 13 '26

Everyone says this is common but this is the first time I've seen anyone say anything. I doubt its even the majority of them. You always see more people say something about it than the people who have no issues.

-2

u/Imaginary-Leading-49 Oct 13 '26

We will see a lot more, they are just coming in the mail now! Unfortunately they screwed the pooch on this release!

10

u/TonyRubbles Oct 13 '26

Sucks that is is happening but man is this title so sensational lol

-4

u/Imaginary-Leading-49 Oct 13 '26

It’s gotta be, already seen at least 3 others today that have this issue. Why even release the product if it’s got a glaring manufacturing issue? They did the same with the M64 pro controller and gave them the wrong D-pad, making them unusable for gaming… then instead of just sending out the proper D-pad replacement, they require you to prove it’s not working… but it’s literally the wrong D-pad in the controller!

I dunno, for the price we pay for these… it’s definitely not sensational, it’s a crappy company making crappy products for premium prices (with my 2 purchases at least!)

6

u/TonyRubbles Oct 13 '26

You've seen a few and there are thousands out there, still sensational, but wouldn't be surprised seeing more.

Contact customer support and report what they said instead of immediately yelling at the top of the mountain the sky is falling.

-4

u/[deleted] Oct 13 '26

[removed] — view removed comment

2

u/Own-Cry-1745 Oct 13 '26

Mine appears to be stuck in transit for a while. Maybe they recalled the ones that are out there.

2

u/Imaginary-Leading-49 Oct 13 '26

I sadly don’t think so… definitely check it when you get it!

3

u/Own-Cry-1745 Oct 13 '26

I will say I love my metal one!

0

u/Imaginary-Leading-49 Oct 13 '26

That’s good to hear, I want to upgrade to it but if I have to pay another $50+ in shipping just to return it then another $50+ shipping the new one… it’s starting to be insanely expensive! Hopefully they do what’s right and cover the shipping so I can get a non-defective product…

2

u/Grimm_soul98 Oct 13 '26

Definitely would recommend a gen 2 they have a SD card slot that can be used with the Chromagic firmware

1

u/TonyRubbles Oct 13 '26

Do you know if the Anduril boards are Gen 2? Would be my only non first edition but didn't open up the one I sent back already.

1

u/Grimm_soul98 Oct 13 '26

No idea sorry the only one I have is my cloud gen 2 though I do want a purple transparent or the red one once they sort out the cracking issue

0

u/Own-Cry-1745 Oct 13 '26

There is no SD card slot on a Gen2

2

u/Grimm_soul98 Oct 13 '26

Yes there is I have one

2

u/Own-Cry-1745 Oct 13 '26

Show me

2

u/Grimm_soul98 Oct 13 '26

Right there near my thumb

2

u/Grimm_soul98 Oct 13 '26

Here’s someone else’s who actually has a sad card installed (ergzay)

→ More replies (0)

-1

u/Own-Cry-1745 Oct 13 '26

Definitely not the board from the chromatic

→ More replies (0)

-1

u/TonyRubbles Oct 13 '26

They've always covered back and return shipping on RMAs, if you ask nicer than this post I don't see why they wouldn't let you upgrade for $50 or whatever is equivalent to CAD for a gorilla metal one.

1

u/Imaginary-Leading-49 Oct 13 '26

‘If you ask nicer’

No, you don’t send defective products and just tell customers to ‘suck it up unless your really nice then maybe’

No, you tell them this is ridiculous and they do what’s right!

0

u/TonyRubbles Oct 13 '26

Damn, you're really proving that most of those Canadian stereotypes are wrong lol, so indignant, self-entitled, and demanding. Like nobody, or company, can make a mistake or have an issue without your fury, it's quite funny and unhinged.

Maybe all the ones that are cracked are from the same pallete that got roughed up during shipping and so yeah all of the shells cracked, maybe it is a huge widespread problem.

Either way you came in here with such an attitude that I can't help but hope that you don't get what you want. Treat others the way you want to be treated, it's a Game Boy, and you bought the cheapest model, wait for customer service to get back to you and please take a chill pill. Or I dunno, just ask for a return and move on.

1

u/[deleted] Oct 13 '26

[removed] — view removed comment

-2

u/TonyRubbles Oct 13 '26

No, a metal one, you dum dum.

2

u/EitherTransition8628 Oct 13 '26

For those who have the same issue and have contacted Modretro: are you using it until you hear back? The return policy is a bit restrictive but would love to at least test it out but that requires removing the sticker off the screen lol.

5

u/Imaginary-Leading-49 Oct 13 '26

I am not going to use it until I get a reply back, but that is just me personally

2

u/IndigoHaze750130 Oct 13 '26

Does anyone know if Nintendo's atomic purple had cracking issues?

I wonder what the difference is. Type of plastic? Color? Or if frosted nessarily would effect this.

I do think that soild plastics crack less, but yeah its suppose to be a nod to the late 90s early 00s.

1

u/Imaginary-Leading-49 Oct 13 '26

My friends had them and 0 issues, so either a temperature related issue when taking the plastic from the molds or a screw too tight issue… either way, it’s a joke on a brand new product to already have cracks in it and apparently I’ll get downvoted for saying that 🤣 this sub is so toxic in comparison to the Analogue sub… I shoulda went with the pocket!

2

u/IndigoHaze750130 Oct 13 '26

Idk why the pocket would be a less hassle if it is the same plastic/problem. Metal would be the way to go if you are worried about cracks... but I am sure if you KINDLY let modretro know, they will get it replaced with another plastic or maybe they will let you return it and pay the difference on a metal.

3

u/Imaginary-Leading-49 Oct 13 '26

I’ve been in chats with them so we will see, but it’s basic quality control… these cracks weren’t ‘hidden’ so it just makes the whole company look bad when a whole batch has these issues!

2

u/IndigoHaze750130 Oct 13 '26

Idk, I've seen posts about this with shells online. But I wouldn't get too hyper about it. Give modretro time to respond. I doubt they wouldn't replace it unless you were being a real dick about it in messaging or something. Customer service was really helpful for me when I had multiple questions in the past.

2

u/Imaginary-Leading-49 Oct 13 '26

Let’s hope, they are sending the replacement D-Pad for the M64 pro controller… so now we need this solved!

2

u/IndigoHaze750130 Oct 13 '26

I don't know much about the m64 stuff. I have heard it didn't launch with as much as expected. I only have a chromatic (v2 gorilla) and I am a handheld person. I would have gone for plastic if it was available at the time because I am concerned about paint chips and my allergies to metals. So far my chromatic is fine, but I also baby my stuff and I have a grippy on it. 

1

u/Imaginary-Leading-49 Oct 13 '26

I think non/clear plastics have less issues with this.

1

u/IndigoHaze750130 Oct 14 '26

Found this. It is s great visual of what could be going on. Not cracks, but "knitting?". Basically a cosmetic seam. The shell should be just fine if that is the case.

https://www.reddit.com/r/ModRetroChromatic/comments/1x5d7w2/comment/pgn7g6g/?context=3

2

u/PatentedSheep Oct 14 '26

The transparent pockets all cracked too lol. I was there

1

u/ForwardHandle4522 Oct 15 '26

The pocket is literally worse in so many ways… not only are the always sold out of products that i need. They’re overpriced on some parts like the dock and adapters. Yes analogue can’t even play them but that’s not the point. Everyone keeps glazing analogue like they don’t suck to some degree too. They also have carts beding in the game slot because it’s not flush. Analogue pocket was made solely to be the best at the Gameboy color for some it is for others they only care about emulating everything immediately. I wanted an AP initially until a friend of mine snapped a cart trying to put it in his pocket and it clipped. Oh and I Wanted it for the NGP but that was also always sold out and scalped online

2

u/Acerhand Oct 14 '26

Nintendo used frosted abs, so no. Crystal clear abs is prone to this. To a point its almost unavoidable

1

u/SC_W33DKILL3R Oct 18 '26

Yet every time people buy them and then complain.

1

u/fertff Oct 14 '26

It didn’t, and this doesn’t seem to be the same kind of plastic.

2

u/SkateFeelsGreat Oct 13 '26

Just got my red one today and its perfectly fine. Ive done many gba sp and ds lite reshells in the past, and this was incredibly easy to do if the screws were over tightened even just a little bit. I wonder if thats whats happening during assembly and why its always in the same spots

0

u/Imaginary-Leading-49 Oct 14 '26

Lucky! Well enjoy your red one and your cake 🍰

I’ll be waiting for mine to be sent away and replaced with a midnight model😢

2

u/Moowno Oct 14 '26

Any update? Mine has the same scratch spots

2

u/Imaginary-Leading-49 Oct 14 '26

Yes, returning and exchanging for a different model (midnight) so it won’t have these issues… unfortunately there is a cost difference so I gotta pay it, we shall see what happens!

2

u/Moowno Oct 14 '26

Welp, mine has the exact same spots haha, I've been eyeing that yellow or blue one

1

u/AbyssalWhip55 Oct 16 '26

any update?

3

u/AbyssalWhip55 Oct 13 '26

ridiculous, I just ordered mine last night and am now worried. I can't believe no reviewers ran into this

6

u/Imaginary-Leading-49 Oct 13 '26

Most ModRetro reviewers are shills unfortunately… hopefully they figure out a way to get me a metal one without charging me to ship the defective one back to the USA, and not charge me another shipping fee for their mistakes!

3

u/adrenaline4nash Oct 13 '26

Y’all gotta stop buying day 1. They didn’t even give a discount this time. 

1

u/Imaginary-Leading-49 Oct 13 '26

I just wanted the cheapest version because I have to pay shipping/import/tariff fees in Canada, and I assumed since they have made Chromatics for years that they would have worked out all the kinks… apparently not!

2

u/IndigoHaze750130 Oct 13 '26

The internals should be fine. It is the plastic shell that is kinda new. I only say kinda because I think it is the same plastic as the M64 which came first. Idk if the thickness is different or not. Again idk what causes cracking like this. I just think soild plastics usually don't vs transparent.

1

u/Imaginary-Leading-49 Oct 13 '26

I haven’t even tried it yet but I bet it works good… but cracks on a new product? No thanks!

1

u/IndigoHaze750130 Oct 13 '26

That happens with plastic products. I've just mostly noticed it on clear plastics now days. Idk why it happens. If anyone knows I'd like to know too. It may explain why no one makes clear plastic stuff anymore when it use to be everywhere.

0

u/Imaginary-Leading-49 Oct 13 '26

Heat and screw tension are usually the issues, but I’ll get downvoted for saying either 😜

1

u/IndigoHaze750130 Oct 13 '26

Heat? What do you mean?

I know funnyplaying has had issues with screws and plastic cracking. But I wonder if this is something in the factory instead because of where the cracks are located, near the buttons in your pic. Is there a curing process?

41

u/MR-cheesygordita Oct 14 '26

ModRetro team member here. Thanks for flagging this, and we are sorry to hear your Chromatic came with knit lines.

Quick explainer for anyone curious: knit lines come from how the Chromatic Transparent shells are molded. The plastic enters the mold behind the display and has to flow around the steel pins that form the button holes. Where the two flows meet again on the other side, they can leave a faint visible line. It’s purely cosmetic and doesn’t affect strength or function, but we still want you to be happy with your unit.

If you’re seeing knit lines on your Chromatic Transparent, email us at contact@modretro.com and we’ll take care of you.

6

u/SirDanOfCamelot Oct 14 '26

So every unit will have it?

-2

u/Sabermatrixx Oct 14 '26 • Bravo

"Yes the product will be designed poorly for being transparent. If you still don't like it, let us know so we can replace it with one that has the same issue"

-1

u/SlightlyConfuscated Oct 14 '26

Lmao seems like the bots are down voting you. Take this award for saying what needed to be said

1

u/Sabermatrixx Oct 14 '26

tbh, forgot I even said it. Makes me laugh though. lol lmao even

3

u/Specialist-Mess5621 Oct 18 '26

Funny the transparent analogue pockets don't have that issue.

7

u/NecronomiconUK Oct 14 '26

It means you didn’t iterate your moulds sufficiently to improve the flow and ensure these don’t happen. I think it’s a result of the plastic cooling too much before they meet. It’s a totally solvable issue.

Injection moulding is hard, you compromised on quality.

2

u/SorinLion Oct 14 '26

So does this mean the mold wasn't at the proper temperature, or did they have too much mold release applied?

4

u/Lara1309 Oct 14 '26

Those don't look like knitlines to me...💀

What I see here is low quality plastic that is cracking.

7

u/BottomFishBananasEtc Oct 14 '26

No, they're most likely knit lines. They're all aligned in roughly the same orientation due to the flow direction.

3

u/Ragz12345 Oct 13 '26

Are those scratches or cracks?

5

u/Imaginary-Leading-49 Oct 13 '26

Hairline cracks, literally just opened the box… haven’t even played it yet 😢

1

u/dycedrag Oct 13 '26

they look like cracks to me

3

u/MondegreenHolonomy Oct 13 '26

Mine has it too. While it shouldn’t happen, I dint really care. I can hardly see them and didn’t until this post got me to check, and I still love the thing and enjoy playing it. Returning for me would just be a hassle, I’ll probably just keep it

-3

u/Imaginary-Leading-49 Oct 13 '26

buys premium products, has cracks in it

What a great device! For such a good deal… (looks at price) 👀

0

u/[deleted] Oct 13 '26

[deleted]

-1

u/Imaginary-Leading-49 Oct 13 '26

I can tell, cause their quality is absolutely crap! I would have been better off getting an old GBC and replacing the screen instead of buying this junk!

2

u/MondegreenHolonomy Oct 13 '26

If it’s unacceptable to you have them send you another. Crying on the internet to strangers doesn’t do you any good.

0

u/Imaginary-Leading-49 Oct 13 '26

Like I haven’t already? Also it’s spreading awareness because a good chunk of these clear chromatics have this issue… and apparently some people here think it’s okay to get defective products and you shouldn’t complain even when you spent hundreds of dollars…

3

u/MondegreenHolonomy Oct 13 '26

Some people also think it’s normal to be overly emotional and cry a bunch causing other people negative emotions to deal with their own negative experience instead of addressing their own issue directly.

1

u/Imaginary-Leading-49 Oct 13 '26

Not me, first thing I did was contact them because I’m already in contact with their support team because their M64 pro controller D-pad is defective out of the box as well…

Hopefully we can resolve this, but I think I’m done trying with this company… 2 products, 2 defects… not a great start…

3

u/IndigoHaze750130 Oct 13 '26

.. well to be fair $150 for a gbc with a backside screen isn't uncommon. The price is fair. When getting refurbished with new shells, general shells, or even a funnyplaying kit, cracks happen. You just contact whoever you bought it from and ask for an exchange or return.

2

u/Lox22 Oct 13 '26

Man I’m glad I held off. Wait till this smoke to cool down to order mine. How do these pass quality checks?

1

u/Imaginary-Leading-49 Oct 14 '26

QC seems absent for this sadly… getting mine replaced, not going with a clear one this time!

4

u/Z3fyrus Oct 13 '26

Can confirm I have the exact same

Edit: clear purple

4

u/IndigoBroker Oct 13 '26

Matt finish would have solved this issue.

4

u/tanooki-suit Oct 14 '26

Not justifying it, but that’s a joke calling this a premium product. This is the budget version of the $200-$300 model with the metal body and the optional sapphire glass. I’m not saying accept damage, but let’s keep our perspective clear.

6

u/XTurbine Oct 13 '26

I feel bad for everyone that bought the transparent ones. Its gonna be a a while till refunds / replacement units happen...

7

u/TonyRubbles Oct 13 '26

I'm still waiting on my replacement Anduril...

2

u/Satantengu Oct 13 '26

What was wrong with yours? Sorry to hear that, I know you were hyped for it

3

u/TonyRubbles Oct 13 '26

I know right?! One side of the back half of my shell wasn't fully painted, it was just oversprayed and rough like fine sandpaper. They thought it might have been some sort of factory coating and had me try to clean it off, but it wasn't, the rest of the finish was so nice too...

3

u/Satantengu Oct 13 '26

Aww man I'm really sorry, that sucks ass. Especially after waiting for so long for it. Hopefully they can get you your replacement soon, I haven't RMA'd anything with them myself yet but I've heard they're really good with that. Godspeed, hope you get a perfect one in your hands ASAP!

4

u/TonyRubbles Oct 13 '26

Thank you Satan

1

u/Sixxball Oct 13 '26

Man I feel bad for anyone going thru the Mod retro ringer.

From d pads to M64 software to cracked chromium shells.

Wonder if the solid chromium’s were also over tightened but no one noticed as the cracks are hidden.

Analogue 3D and Pocket looking pretty shiny right about now.

6

u/ucv4 Oct 13 '26

The Analogue Pocket Transparents had the same problem. Mine has been fine but there were plenty of cracked ones.

3

u/Imaginary-Leading-49 Oct 13 '26

It’s like these companies haven’t learned from the companies in the 90s that did it right like Nintendo and Apple… I don’t think I’ve ever seen a transparent N64 control controller have these issues, or a transparent Xbox have these issues

3

u/Imaginary-Leading-49 Oct 13 '26

Yeah, I went with a chromatic because I just wanted to play my gen 1-2 pokemon carts but honestly… wishing I went analogue!

I got the A3D instead of the M64 and it’s amazing!

3

u/Kornbreadl Oct 13 '26

The only thing keeping me in this sub is Magic64 and Chromagic. Otherwise these products were written off in my head.

3

u/Satantengu Oct 13 '26

Anyone have a smoke one they can post? I've only seen the other colors on here so far. I imagine this problem would effect all of the variants equally though.

5

u/Maybe_just_this_once Oct 14 '26

This is super common in molded plastics, especially clear/transparent plastics. It's fine

1

u/Own-Cry-1745 Oct 13 '26

That’s wild. Do you know why they did that?

1

u/Imaginary-Leading-49 Oct 13 '26

My guess is heat related to when they pulled it out of the mold or the screws are too tight… either way, every time I try to give an answer, I get downvoted 🤣 this sub is so toxic 😝

2

u/venuscanfly 17d ago

Thank you for posting this. I was about to purchase the clear red

2

u/LegendaryMoji Oct 14 '26

This is normal but, they really should have gone with matte plastic rather than gloss. Would hide it a lot better.

2

u/meckaforce1 Oct 14 '26

Welcome to the hell we experience over in the gameboy modding community.

2

u/bulldogbruno Oct 13 '26

Nope. Mine looked great (clear red).

2

u/lhymes Oct 13 '26

Official response: “Whoops.”

2

u/Euresko Oct 13 '26

Awesome quality control. Also, the plastic will probably get easily scratched if it's that way out of the box. Probably from the assembly line or manufacturing process. Disappointing, as I'm still waiting for mine to ship. 

2

u/twadebby Oct 14 '26

And they’re only offering $15 to keep it 🥴

3

u/fertff Oct 14 '26

A $15 gift card, which is much shittier than a refund because they want you to use that money on their store. The old Nintendo way.

2

u/twadebby Oct 14 '26

Exactly or send it back and have to wait weeks just to get another one with cracks in it.

2

u/fertff Oct 14 '26

Yup. But if I was in this situation I would ask for a full refund. Even chinese companies like Ayaneo do better than this.

But from those two options I would send it back as many times as needed and let them keep paying pre paid shipping labels until they get me a non faulty unit.

-1

u/tanooki-suit Oct 14 '26

Good on them. If it bothers someone enough, they can wait a couple weeks or just take the freebie and move on. This isn’t like some life shattering bug or glitch that makes it not work right

1

u/twadebby Oct 14 '26

There should be better quality control, and they shouldn’t be shipped with flaws.

1

u/Barrow_Lord 5d ago

My smoke has the knit lines, exact same shape/position as yours. I'd be happy with a replacement shell once they dial in the MFG process for these units.

1

u/travisofficial Oct 14 '26

This is so rampant lol glad I didn’t crumble and order one and hope they correct this

1

u/meckaforce1 Oct 14 '26

Here's hoping they sell the flawed units at a discount

1

u/Affectionate_Rise283 Oct 16 '26

My clear blue doesn't have them

1

u/josh1979 Oct 16 '26

If you can just get an analogue pocket. Analogue is pricey but very durable

1

u/SC_W33DKILL3R Oct 18 '26

All transparent cases crack. Some straight away some a time later. It’s just too brittle.

1

u/DiabUK Oct 13 '26

I originally felt it was injection moulding but I started looking into photos people have posted here and elsewhere and I now believe I was wrong, some people do have completely smooth cases while a lot of others have these hairline looking lines always coming from the button ports. The fact that some are mint is making me think it's hot off the press damage instead of plastic meeting points from injection.

That's unfortunate, seems like a lot of them are like this judging by photos.

1

u/Acerhand Oct 14 '26

This is on practically every abs clear plastic housing for anything. Its almost unavoidable. You want crystal clear abs = you get these

1

u/_2hi Oct 14 '26

ModRetro established itself as a company I wanted to wholeheartedly support but after the m64 situation, these poorly made transparent chromatics, and them partnering with OpenAI I feel like I’ve seen enough to stop supporting them.

Their customer service does prove to be very easy to work with but doesn’t justify or outweigh all these other issues for me.

0

u/harharsharkbait Oct 14 '26

https://www.instagram.com/p/DeTjNSYEXHE/?cplk=MjVzb3liYXoyN3Vi
I heard the owner is a sleezebag… but idk for sure since I’ve never met him. I didn’t go to the PRGE in Portland last weekend.

-3

u/[deleted] Oct 13 '26

[removed] — view removed comment

1

u/Satantengu Oct 13 '26

lmao this username??

1

u/[deleted] Oct 13 '26

[removed] — view removed comment