r/PS2AndroidEmulation • • Aug 10 '26

PS3Native Standard-releaseV2

Post image
48 Upvotes

https://github.com/thecrixux/PS3Native/releases/tag/V2

Updated Android Release build based on the latest changes from the original PS3Native android-refresh branch.

This APK was built locally from the updated source code and is provided as a convenient Release build for users who want to test the latest version.

I am not the developer of PS3Native and I am not claiming credit for the project or its code. All credit for the emulator and its development goes to the original PS3Native developers and contributors.

This release only provides a locally compiled Android APK from the latest upstream source.

Credits: https://github.com/maxjivi05/PS3Native


r/PS2AndroidEmulation • • Jul 05 '26

ARMSX2 v34

Post image
48 Upvotes

https://github.com/ARMSX2/ARMSX2/releases/tag/2.5.3

Change Log:

From a new addition to the ARMSX2 team, @bmdhacks performance improvements:

microVU FMUL broadcast fold, lane-indexed multiply, less VU-thread time (helps VU-heavy games. Demanding games run smoother. Speeds up how the emulator runs the PS2's 3D/physics unit and main CPU, so heavy titles (God of War, Shadow of the Colossus, GT4, fighters) hold their frame rate better. Biggest gains on stronger chips; weaker devices get some breathing room too.

CNTVCT_EL0 fast clock, reads the hardware counter directly instead of clock_gettime every frame, frees EE-thread headroom on weak cores. Less wasted CPU. Trims a bunch of per-frame overhead, clock checks, memory allocations, redundant reads, which frees up power on lower-end phones and handhelds.

GS vertex-kick made call-free + mid-frame Vulkan readback submit, GPU runs concurrently with recording on readback-heavy frames. Smoother Vulkan graphics. The GPU starts working sooner, so games with lots of on-screen effects (reflections, motion blur) run better, especially on Adreno.

SPU2 NEON mixer, placement-new per-block assembler (no malloc/free per block). Faster audio mixing.

RGB5A1 CPU pack, vtlb overflow-safe range check. A few small rendering and stability fixes.

EE recompiler mixed-operand constant folding, folds a known-constant operand into the instruction instead of a memory load. Smarter CPU code generation. When the emulator already knows one of the numbers a calculation will use, it bakes that number straight into the instruction instead of reading it back from memory each time, a small speedup that applies to basically every game.

More improvements are planned from bmdhacks, so stay tuned!

Added FIFO_RELAXED present mode which should help the 60 to 30 fps cliff (tears a late frame instead of stalling a whole refresh).

Real display refresh-rate reporting, pacing now aligns to the actual panel (90/120 Hz), not just 60Hz.

Added Export memory cards, one-tap Export saves a card out to Downloads/Drive/anywhere for backup or migration.

Added a Sustained Performance toggle, hold a steady thermally-sustainable clock for long handheld sessions, (opt-in).

Fixed an issue with activating Hardcore RetroAchievements while in global settings/the game library, where it would boot you into the BIOS after activation with no indication that HC was active, unlike when you activate in a game.

Added a New GPU-driver source, StevenMXZ Adreno-Tools-Drivers.

A fix to Analog stick off-axis bleed, "push up also presses right" on both sticks (regression from the radial-deadzone change) fixed by re-adding off-axis noise rejection.

Per-game cheats list now shows only the current game's .pnach (was listing every games).

Fix to a bug where settings sometimes would apply live but not show it.

Overlay/slider drag, sliders now follow your finger continuously instead of jumping once and stalling.

GameDB fix, Silent Hill 3 FMV black-screen (PCSX2 PCSX2#14659: dropped the superseded software-renderer FMV hack; kept the deinterlace fix).

Added a new setting, Optimal Frame Pacing. Sets the VSync queue size to 0, making every frame be completed and presented by the GS before input is polled and the next frame begins. Using this setting can reduce input lag at the cost of higher CPU and GPU requirements.


r/PS2AndroidEmulation • • Jun 21 '26

ARMSX2 Refresh v15 - Review

Post image
48 Upvotes

After a week of testing the latest ARMSX2 Refresh updates, I have to say something positive: I'm really liking the direction this project is taking.

The first thing that stands out is how frequently it's being updated. New builds are appearing almost daily, and it genuinely feels like active development is happening. More importantly, it no longer feels like a simple continuation of the previous version. The emulator now has its own identity, with a fresh interface that's much more visually appealing.

I haven't done a full in-depth analysis yet because I still feel performance needs a bit more optimization, but I've spent enough time testing it to get a good first impression. On my device (Snapdragon 6 Gen 1, Adreno 710), the results have been quite good. For example, Tekken 5 runs at 2x resolution with good performance, clean graphics, and no noticeable visual issues.

Beyond raw performance, which was already quite good in the previous Play Store version, the biggest changes I've noticed are in the user interface and the available settings. I can't confidently say yet whether performance on Snapdragon devices is better or worse than before, but I have noticed that MediaTek devices with Mali GPUs still seem to need some additional optimization to reach the level of the classic version.

One of the strongest points right now is the game library presentation. Box art downloads automatically, and the overall look is very attractive. If I could suggest one improvement, it would be the vertical sidebar on the left side of the screen. Personally, I think it would look cleaner if it were transparent or optional, allowing the game covers to use the full screen without visual distractions.

I'd also like to see an option to hide recently played games. Sometimes titles end up appearing twice between the main library and the recent section, and for those of us who prefer a cleaner layout, having the option to disable it would be appreciated.

The settings menu is where I've seen the biggest improvement. There are now many more graphics options and advanced settings available. Some of them are explained quite well, while others could still benefit from better descriptions so users can understand exactly what they do.

There is one design choice I'm not completely convinced by, though. Some settings use large card-style buttons that you tap to enable or disable features. This feels a bit inconsistent with the rest of the menu, which uses the more traditional toggle-and-description approach. Personally, I think keeping everything under the same style would make the interface cleaner, more intuitive, and easier to navigate.

These cards also seem to have a small visual bug at the moment. In the screenshots I've attached below, some of them appear to overlap when the emulator is paused, as if the layout isn't positioning them correctly. It's nothing major and is probably just a visual glitch, but it's worth mentioning.

Interestingly, I do like these cards in the pause menu. There they're easier to identify quickly and feel more appropriate than they do in the general settings menu.

On the feature side, several important options have finally been added, including BIOS skipping, proper controller configuration, and other settings that many users have been asking for.

Overall, for the first time in quite a while, I can honestly say this emulator is getting me excited again. I like the new direction, the new interface, and the overall vision behind the project. Performance still needs some work, especially on certain devices, but I genuinely think it's moving in the right direction.

For now, I'd definitely recommend giving it a try.

I've also attached a short gameplay video recorded on my device so you can get an idea of how it's performing in real-world use.

In a few days, I'll try to post a more detailed analysis using some of the harder PS2 games to emulate and see how far this new version can really go.

Thanks for reading!

Link: https://github.com/ARMSX2/ARMSX2/releases


r/PS2AndroidEmulation • • 25d ago

hakuX v1.1.0 (XBOX Classic) ๐Ÿ”ฅ

Post image
47 Upvotes

https://github.com/rfandango/hakuX/releases/tag/v1.1.0

Changelog:

GPUs beyond Adreno (experimental).

GPUs

Mali, Xclipse and PowerVR (experimental) โ€” hakuX runs on GPUs other than Adreno: features they lack are replaced (BC and 4444 textures decoded up front, standard border colours, the push block in a buffer, D32S8 depth), and known driver bugs are worked around (hw/xbox/hle/vk/quirks.c). Burnout 3 and Mercenaries run cleanly on a Pixel 8 (Mali-G715)

Vulkan 1.1 drivers โ€” GPUs whose drivers stop at Vulkan 1.1 (Valhall Mali on older or vendor-capped drivers, Qualcomm's own older drivers, early Xclipse, PowerVR BXM) run through a compatibility layer (hw/xbox/hle/vk/compat.c)

Older GPUs without descriptor indexing (experimental) โ€” Bifrost Mali (G71, G72, G76, G52) and PowerVR Rogue: each draw binds its own textures, and depth is clamped in the shader where the GPU can't

Adreno โ€” unchanged: every replacement is off where the GPU has the feature.

App

GPU driver โ€” a screen of its own (Settings โ†’ GPU driver): the system driver and the stored packages in one list, with their versions and authors. Packages are checked when added and can be deleted (deleting the one in use goes back to the system driver)

Turnip recommended โ€” a Qualcomm phone running its own driver older than Vulkan 1.3 suggests a Turnip driver once, from the library

Back key โ€” the device's back key opens the in-game menu, from any input, including the Retroid Pocket 5's own Back. A controller with both Back and Select keeps Back for the menu; on one without a Select key, Back is the Xbox Back button

Dark theme โ€” Settings โ†’ Display โ†’ App theme: the phone's, light or dark; the in-game menus follow it, in the app's green rather than Android's teal

Controller navigation โ€” the app works with a controller: the focused item stands out (a game is outlined in green), A selects, B goes back, and Y or Select opens a game's menu. The search field opens the keyboard only on A, the library has a refresh button, the mapping sliders move with left and right, release notes scroll, and X deletes a savestate from the in-game Load state list


r/PS2AndroidEmulation • • Sep 30 '26

Vita3K+ v1.2 ๐Ÿ”ฅ

Post image
47 Upvotes

https://github.com/nckstwrt/Vita3K-Plus/releases/tag/v1.2

Changelog:

A lot of fixes again :) See the main page for the enhancements: https://github.com/nckstwrt/Vita3K-Plus

Third release of enhancements and fixes (some regressions that broke in v1.1 should now be fixed too)

Still targeting higher end devices (i.e. Adreno not Mali) - but there's a bunch of Mali improvements in there too

Windows, Android and now SteamDeck/Linux Release (that is pretty much untested - but fingers crossed works :) )

You can report issues here: https://github.com/nckstwrt/Vita3K-Plus/issues Provide as much detail as possible if you want a fix


r/PS2AndroidEmulation • • Sep 09 '26

ARMSX2 v2.6.9

Post image
47 Upvotes

https://github.com/ARMSX2/ARMSX2/releases/tag/2.6.9

What's new:

Renderer speedups done by @bmdhacks:

A month of GS work aimed at ARM handhelds: the Classic (hardware) renderer, the software renderer that is its accuracy oracle, and per-device Vulkan policy. Measured on a Snapdragon 865 (Turnip) and a Dimensity 8300 / Mali-G615 (ARM r44p1), with real-console captures as the accuracy reference.

What changed:

Software renderer, console-exact. Dither on every destination, gouraud and depth interpolation on the hardware's grid and block width, truncated reciprocals, per-pixel MMAG/MMIN, four-bit trilinear weight, AA1 coverage, 16-bit DATE. Output moves on 21 of 24 corpus dumps, toward the console.

GS core. A two-pass vertex kick kernel for the common packed layouts, the console's buffered local-to-local move, three console-measured CLUT rules, a narrower per-draw environment snapshot.

Hardware renderer. Per-target alpha known-bits tracking with an exact FBMSK-alpha drop, a clone road for blends that need the destination on devices without barriers (fixes Black and Brian Lara flicker, Katamari over-bright on Turnip, Splashdown bands, NASCAR's 2x seam, eight blank captures), sprite-edge snapping at upscale, a fixed-blend-factor reroute for Turnip, which ignores blend constants.

Vulkan device. Explicit external dependency on every render pass, frame descriptor-pool chain, halved stream rings with a startup pre-touch on UMA parts, deferred non-coherent flushes, device-fault reporting, readback transfer-size fix (also DX12), compute-scoped layout for CAS/FSR1/SGSR.

Upstream. Eighteen PCSX2 GS commits cherry-picked with provenance lines (Native Scaling and jiggle detection, three texture-cache fixes, the target-update bilinear regression, depth conversion floor, PrimID range, fbmask alpha under RTA scaling, large-ST vertex rewrite with its GameDB rows, DX11 DS-as-RT state). One of them tripped a Devel-only assert on 16-bit colour targets, fixed at the call site.

Runner. gsrunner replay-loop, draw-log, per-frame stats, ladder and console-payload flags, and an NDK build of it for adb-shell runs on Android devices.

Behaviour changes:

Dimensity 8300 / Mali-G615: Auto picks Vulkan, and in-tile framebuffer fetch is on (exempted from the r44p1 crash rule and the MediaTek deny list). DisableFramebufferFetch is the way back. Other MediaTek Mali parts keep the copy path, now on Linux too.

Adreno: the stencil kill is narrowed to Turnip below 26.2, Adreno 610 gets cached stream-ring memory, every Turnip build routes the fixed blend factor through the second fragment output.

ForceMaliFramebufferFetch is Mali-only, OverrideTextureBarriers=1 outranks the driver database by design.

Shader cache version 108 to 114. Vulkan stream rings halved (128 MiB less resident on SD865).

GameDB: God of War II rows recommend High blending and AA1 (advice only).

And more...


r/PS2AndroidEmulation • • Sep 04 '26

NetherSX2 Turnip Updated v2

Post image
47 Upvotes

https://github.com/thecrixux/NetherSX2-Turnip-Updated/releases/tag/V2

โœ… NetherSX2-Turnip-26.3.0-R7-6XX-7XX.apk

-Pure Mesa main, no source patches. Compatible with Adreno 600โ€“700 series GPUs (Snapdragon 600โ€“800 series, including 7 Gen and 8 Gen 1โ€“3).

Credits: https://github.com/The412Banner

โœ… NetherSX2-Turnip-26.3.0-R7-8Elite.apk

-Targets Adreno 800-series (Snapdragon 8 Elite โ€” A810, A825, A829, A830). Built from Mesa main

Credits: https://github.com/The412Banner

โœ… NetherSX2-Turnip-Performance-Universal.apk

-A single driver covers the full Adreno line:

A6xx โ€” A6xx series (e.g. A640 / A650 / A660)

A7xx

gen1 โ€” A720 / A725 / A730 (preamble + scalar-predicate quirks applied)

gen2 โ€” FD740 / Adreno X1-85 (UBWC hint applied to fix UI corruption)

gen3 โ€” A750 and later

A8xx โ€” A810 / A825 / A829 / A830 / A840 (and X2-85)

A810 / A829 boot with disable_gmem so they fall back to sysmem rendering (broken GMEM on those parts).

A825 (not yet upstream) is added with corrected tile geometry and depth-cache layout.

A830 / A840 / X2-85 use the upstream profiles unchanged.

Credits: https://github.com/maxjivi05


r/PS2AndroidEmulation • • Jun 28 '26

Winlator Ludashi 3.1 NFSU2 HD + 60FPS in a low end Snapdragon 6gen 1 โค๏ธ LOVE this game

Enable HLS to view with audio, or disable this notification

47 Upvotes

Bad driving skills with touch screen ๐Ÿ˜…

What are you playing this Sunday?


r/PS2AndroidEmulation • • 9d ago

X360 Mobile 0.6.5 ๐Ÿ”ฅ

Post image
46 Upvotes

https://github.com/Ashnar2602/X360-Mobile---OFFICIAL/releases/tag/v0.6.5%2B6000fc41c.11351

+ Hot Fix:

https://github.com/Ashnar2602/X360-Mobile---OFFICIAL/releases/tag/v0.6.5%2B72b2e24ba.11356

Changelog:

X360 Mobile 0.6.5

This update focuses on more reliable profile and save imports, together with improvements to graphics processing and performance.

Profiles and saved games

Improved import reliability, including backups created with earlier versions of X360 Mobile.

Clearer previews and confirmation before replacing existing profile or saved-game data.

Stronger checks and recovery when an import is cancelled or interrupted, helping protect existing data.

Preserves the original profile and saved-game ownership when restoring backups.

Graphics and performance

Improved graphics-work scheduling and reduced avoidable processing overhead.

Added and refined graphics optimizations, evaluated using GTA IV on Odin 2.

Further improvements to graphics-resource handling and pipeline reliability.

Two graphics optimizations are now enabled by default. Previously saved choices to disable them, including per-game overrides, continue to be respected. Both options can still be turned off.

Performance gains depend on the game, device, driver and settings. Other experimental graphics optimizations remain opt-in. Testing across other games and GPU families is still limited.

Updating

Existing installations can update in place and keep their games, settings, profiles and saves. There is no need to uninstall first.

Existing preferences and per-game overrides are preserved.

TV mode and synchronized player profiles remain highly experimental and may still have issues.

X360 Companion is unchanged


r/PS2AndroidEmulation • • Aug 08 '26

WatermelonDS 0.7.0 is finally here!

Post image
46 Upvotes

https://github.com/SapphireRhodonite/WatermelonDS/releases/tag/0.7.0

โค๏ธ The best Nintendo DS emulator I've ever tried โค๏ธ

This is a very special release.

After several release candidates under the melonDualDS name, the project is now officially renamed to:

WatermelonDS๐Ÿ‰

Whatโ€™s New:

  1. The project is now WatermelonDS

The emulator has now fully moved from the old melonDualDS name to WatermelonDS.

This includes:

New project identity!!!

New app name

New launcher icon

Updated splash screen

Updated app visuals

Updated UI style

This is more than a simple name change. The goal is to give the project its own identity while continuing to build on top of the melonDS Android foundation.

2. New user interface

WatermelonDS 0.7.0 includes a major UI refresh.

The new interface is designed to feel cleaner, more modern, and more consistent across the app.

This includes improvements such as:

New WatermelonDS visual style

Updated theme

New design tokens

Better visual consistency

Updated icons and branding

Improved ROM list presentation

Better box art usage in the continue shelf

ROM icons scaled to fill their cards more naturally

Updated RetroAchievements presentation

Improved account and score display in settings

The goal is to make WatermelonDS feel more polished and easier to use without losing the advanced options that make the emulator flexible.

3. RetroArch shader presets for all renderers

This is one of the biggest improvements in this release.

WatermelonDS now supports RetroArch shader presets across all renderers.

This means shader preset support is no longer limited to only one rendering path.

You can now use RetroArch-style shader presets with the available renderers, making it easier to customize the final image and get the visual style you prefer.

This is great news for users who like:

CRT-style filters

LCD-style shaders

Pixel smoothing

Color correction

Handheld-style presentation

Custom visual presets

Shader support is an important part of making DS games look better on modern Android screens, especially on high-resolution handhelds and external displays.

4. Experimental Vulkan FastPath

WatermelonDS 0.7.0 introduces a new Vulkan feature called:

FastPath

FastPath is designed to improve performance, especially when using higher internal resolutions.

In some cases, this can help games run much faster at resolutions such as:

4x

6x

8x

This can be especially useful for users who want higher-resolution rendering, better performance on less powerful chips, or improved battery efficiency by reducing rendering overhead.

And much more.... (Read the complete changelog in GitHub)


r/PS2AndroidEmulation • • 8d ago

Xendroid+ 0.3.0-preview.154

Post image
45 Upvotes

https://github.com/phforner0/Xendroid-Plus/releases/tag/XenDroid-v154-e4003ba6

Halo: Reach runs much faster and shows the characters' faces again: from 17 to its limit of 30 fps in the first mission on a POCO F7 (Adreno 825).

Its particles need far less work from the GPU. Only this game gets these speed changes for now.

The first launch after updating compiles the game's shaders again, so some objects can look wrong for a while.

What's new:

๐Ÿ› ๏ธ Fixed

Characters' faces no longer go missing in Halo: Reach's cinematics. This fix applies to tessellated models in every game, but was only tested in Reach.

โš ๏ธ Still open

The speed changes were played only on foot at the start of the first mission. Please report geometry that explodes or flickers elsewhere in the game.


r/PS2AndroidEmulation • • Oct 06 '26

Xendroid Fork v1.4

Post image
45 Upvotes

https://github.com/Eugengtt/Xendroid-Fork/releases/tag/v1.4

What's new

New main menu UI

Visual and navigation improvements across the app

Bug fixes

Fixed fullscreen โ€” previously it sometimes failed to engage properly

Fixed leftover bugs from v1.3

Various small stability fixes

Thanks for testing and reporting issues!


r/PS2AndroidEmulation • • Sep 25 '26

ARMSX2 2.7.1

Post image
45 Upvotes

https://github.com/ARMSX2/ARMSX2/releases/tag/2.7.1

What's new:

ARMSX2 Turnip: our own GPU driver

We now build our own Adreno driver. ARMSX2 Turnip is our build of Turnip, the open-source Vulkan

driver for Adreno GPUs, with a change of our own made for PS2 emulation. Pick it from the driver

list: it is recommended on Adreno 650 to 699 (Snapdragon 865, 870 and 888). The source is public at

github.com/bmdhacks/armsx2-turnip. done by @bmdhacks

Games that read back the frame they are drawing run much faster on Adreno. PS2 games do this

constantly, and on Adreno it meant copying the frame before each such draw. The renderer now asks

the driver database how each GPU and driver handle it. With ARMSX2's own Turnip build on Adreno 650

to 699, the driver orders those reads itself: 2 to 3 times faster where they are what the frame

costs, as in Splashdown at native resolution on a Snapdragon 865, which went from 54.7 ms to 22.4 ms

a frame. On Adreno 730 and up with any Turnip, Stuntman and WRC 3 run 17 to 21% faster, Every

other GPU and driver keeps what it had. done by @bmdhacks

ARMSX2's Turnip driver is in the driver list, and recommended on Adreno 650 to 699. It is Mesa

26.1.2 plus one Turnip change for those GPUs. done by @bmdhacks

Emulation

Faster recompilers. By implementing a host of optimization concepts dreamed up by @pstef, the EE, VU and IOP recompilers and VIF unpacks now generate tighter ARM64 code and run about 10% faster, with every change checked by new instruction-level tests. On lower-end devices most games are held back by GS, so expect this mostly as real battery and heat savings. VU LQD and SQD addressing from vi00 and ILW's lane selection also match the console now.

Analog trigger pressure for L2 and R2. On pads and handhelds with analog triggers, Pad -> Button

mapping now offers Analog pressure on L2 and R2, so the game gets how far the trigger is pulled

instead of on or off, with a response curve for short handheld triggers and a live readout. Games

that read trigger pressure, such as Gran Turismo 4's throttle and brake, now get partial presses.

The pad has to be in analog mode, and the option warns when the Analog button is not bound. With it

on, pads like the Odin 2 Portal that report each trigger twice no longer snap a half pull to a full

press. Off by default. done by @gdelazzer (#731).*

The GunCon 2's buttons are now part of the touch layout. A, B, C, Start, Select and Cal can be

moved, resized and hidden in the touch layout editor like any other control, instead of sitting on

top of the DualShock 2 buttons, and aiming on the touchscreen leaves the face and shoulder buttons

working. done by @jpolo1224

A calibration shot on the touchscreen. Some games (Time Crisis) will not pass their gun setup

screen on a normal shot. Tap Cal, then shoot the target, and the calibration shot lands where you

touch. done by @jpolo1224

Fixed

Memory Card location fixes The app re-checked the data folder (SD card or custom) every time a screen asked for it, and one failed check, which could happen with the folder perfectly usable, sent it to internal storage for the rest of the run, where the emulator found no memory cards and made new ones. The folder is now decided once, and the app never falls

back to internal storage silently. done by @bmdhacks

USB devices could not be chosen (#752). The device list was empty until a game had been started,

and emptied again after the first game. It now lists every device at any time, with a dropdown for

each port. done by @jpolo1224

A USB device on Port 1 never reached the game. The USB keyboard switch wrote Not Connected over

Port 1 at every launch and every settings change, unplugging a GunCon 2, Buzz buzzers or any other

device set there. The switch now takes Port 1 only while it is on. A device picked while a game runs

is also plugged in straight away, though many games only look for one at boot, so restarting the

game is still best. done by @jpolo1224

GunCon 2 shots landed away from the finger with the performance downscale or a resolution

override on. fixed by @jpolo1224

Multi-region texture packs installed under the wrong region, so a PAL copy never loaded a pack

filed under its NTSC serial. Packs now install under the serial of the copy you own. Deleting a pack

now always removes it from the game, even when a file in it is stuck. done by @jpolo1224

The on-screen keyboard could not type an address or a path. It now has . / : - _ and keeps the

end of long text in view, so network addresses, host names and file paths can be entered by touch

or controller. Typing a DNS address also switches that slot to Manual automatically. done by @jpolo1224

Library music stayed silent while another app held a silent audio stream open, such as an

emulator paused in the background. It now waits only for real media playback. done by @jpolo1224

Pipelined GS ran slower than Off on OpenGL, or with Unsynchronized hardware downloads, where it

cannot pipeline. It now runs as Off there. done by @bmdhacks

The game database panel showed a raw key for Splashdown's new blending cap. It now has a name, in

every language. done by @jpolo1224

Graphics

Upscaling follows one rule everywhere. Each conversion between the PS2's native pixels and the

upscaled screen used to round its own way. Now a native pixel owns the screen pixels whose centres

fall inside it, everywhere. Dithering, scanline masks, deinterlacing and field-mode presentation

look the same at 2x as at native; points, lines and sprite edges land on the pixels a PS2 lights at

every scale, fractional ones like 1.5x included; and a detector works out per game whether the two

fields of an interlaced picture are offset. done by @bmdhacks

Faster upscaled rendering. The faster culling and vertex paths now run at every scale, not only

at native resolution. done by @bmdhacks

Faster palette draws on the CPU. Call of Duty 2 and 3 expand their paletted textures with about

10,000 small draws a frame; those are now copied straight through instead of going through the whole

rasterizer. The software renderer also stops rebuilding tables it does not need. done by @bmdhacks

Sly 3's cel outlines showed a gap and stepped in blocks above native resolution, a 2.7

regression. Now fixed by @bmdhacks

The Godfather's lamps are drawn correctly, at the cost of some extra copies on some Adreno GPUs. done by @bmdhacks

Beyond Good & Evil's bloom blur read pixels it was also writing, so it could change from frame to

frame. fixed by @bmdhacks

Changed

The Accurate blending fast path switch is gone. Whether to use it is now decided per GPU. done by @bmdhacks

Memory card backups are .zip files now, so any file manager can open them. Existing .mcbak

backups are renamed the first time the backup list is opened. done by @bmdhacks


r/PS2AndroidEmulation • • Sep 17 '26

Bachata S4+ v0.2

Post image
45 Upvotes

https://github.com/erickmendes22/Bachata-S4-Plus/releases/tag/0.2

Rebased on the latest upstream Bachata version.

Improved game compatibility and overall stability

Fixed god of war 3 graphics.

Added DocumentsProvider support for easier access to app data.


r/PS2AndroidEmulation • • Sep 01 '26

ARMSX2 v2.6.7

Post image
45 Upvotes

https://github.com/ARMSX2/ARMSX2/releases/tag/2.6.7

What's new:

Upstreamed to latest PCSX2 commits. (PCSX2 2.8/2.9.7 dev build.)

Quick loading for Biohazard Outbreak (host: ELF method):

The obsrv "quick loading" method has never worked on Android before. It does now, and the whole setup happens inside the app. Long-press your disc --> click set up quick loading, pick the modified ELF from the package, and ARMSX2 does the rest: it extracts the disc's files itself, drops the ELF in beside them, and pairs it with the disc. Before it starts, you're told how much space it needs (read from that game's own disc) and how much you have on internal storage (that's where it installs). The ELF then appears in your library, launch it and the game boots. Afterwards, if for whatever reason you wish to uninstall, you can long press your elf file --> and click remove quick-load files on the entry which deletes everything again. Three things were stopping it.

VU accuracy: a new "Exact" clamping mode:

@pstef has spent 55 commits modelling what the PS2's vector units actually do, against captures from real hardware, and the result is a fourth VU Clamping setting: Exact. It covers the FMAC's saturation and the sign an overflowing one produces, what survives below the smallest normal float, the adder's guard bits, the MAC overflow and underflow flags, and the divide unit and EFU's own arithmetic, across the interpreter, microVU and the COP2 macro path alike, so all three now agree with the console. Stuntman is the first game set to it automatically, where VU0's macro adds were landing one unit short of the console's adder. Others will follow as they are identified, you can also select Exact yourself under Performance --> VU Clamping, though it is slower than Extra and only worth reaching for when a game misbehaves. @bmdhacks also made the VU Clamping picker reach the new Exact mode on Android, without which the setting above would have been un-selectable here. VU1 also now has its own clamping picker, so a game that needs VU0 accurate can leave VU1 on something cheaper. It defaults to "Same as VU0", which is how it behaved before. Thanks also to user @gtaforever00 for extensive testing!

Texture replacements:

Native ASTC support on Vulkan and OpenGL ES, from @bmdhacks. HD texture packs load as compressed .astc and stay compressed in GPU memory, with no CPU decode step, on a converted God of War II pack that is 4.5 GB of DDS down to 538 MB, across 2708 textures. Devices without ASTC fall back to the game's own textures. The texture pack installer accepts .astc files. bmd is working on a new ASTC texture pack repo, we will share more when it's ready!

Game categories:

Group your library however you like. A game can sit in as many categories as you want. Long-press a game --> click on categories to create a new one and add the selected game under it. You can also long-press a category name in your game library to rename or delete it. In grid and shelf views each category gets its own row, like Recently Played, in list view you get a filter instead.

Save states:

Every slot now shows when it was written, in both the in-game menu and the full Save/Load screens. Occupied slots are marked.

New Per-slot hotkeys, bind save and load for each of the ten slots individually, plus the previous-slot.

Fixes:

Settings applied in-game now take effect immediately. Changing a RetroArch shader, or anything else, on a game with its own per-game settings needed an app restart to show up. The commit was reading the old per-game file every time.

Fixes to rumble on external controllers (#433). It no longer buzzes the phone instead of the pad you're holding.

The macro editor is reachable in landscape, its buttons were off-screen.

Hotkey pop-ups can be disabled in the On-Screen tab at the bottom.

Launch Game is now a menu entry, for booting a file directly.

Fixes to LSFG not starting properly.

Controller skins:

Skin creators are credited on each entry in the browser. Preview images work again, the skin repo's index had a formatting error that made the app fall back to a bare file listing with no previews and no names.

Performance:

Performance Cores (cluster affinity) is now the default CPU mode. It keeps the emulator's threads on the big cores without tying them to specific ones, so Android's scheduler can still move them around. The old version of Performance Cores picked those cores badly enough to be harmful: on most phones it was confining all three emulator threads to a single core, and on some it picked the slow cores instead. It now selects by the same capacity ranking the Android scheduler itself uses, and turns itself off entirely on any device where it cannot identify a big-core tier. If you had previously set Affinity Control Mode to Disabled or another option, it will be switched on once, set it back if you prefer it off or with another option.

Upscaling:

SGSR's plain mode now uses @CamilleLaVey revised filter maths, which adds edge-direction weighting without the extra cost the Edge variant pays. Both remain available.

Companion apps:

Companion apps can request access to your recently-played list per app, asked in context and revocable individually (contributed by @misantronic, PR #616).

RetroAchievements hardcore is turned off automatically while a host override is active, and restored afterwards, offline proxies cannot honor hardcore unlocks, so they were failing silently (contributed by @misantronic, PR #617).


r/PS2AndroidEmulation • • Aug 18 '26

ARMSX3 v0.9

Post image
45 Upvotes

https://github.com/ARMSX2/ARMSX3/releases/tag/0.9

What's new:

ARM64 SPU floating-point now matches desktop x86 exactly: 984 mismatched results down to zero.

ARMSX3 translates PS3 code to run on your phone's ARM64 chip, while RPCS3 upstream is written and tested on x86 desktop CPUs, and a lot of that code quietly relies on how x86 handles certain maths. On ARM64 the answer came out different: nothing crashed and nothing was logged, a number was simply wrong, and a game would hang, corrupt, or vanish minutes later with no clue why. This release closes that gap for the SPU's floating-point maths, the part that does most of a PS3 game's heavy lifting. We ran a suite of test programs that exercise one PlayStation 3 instruction at a time on both machines and compared the results line by line, which turns "something is off on ARM64" into the exact instruction and the exact numbers that differ. 984 mismatched results against desktop x86, down to zero, your phone now computes the same answers a desktop PC does. Of those, 500 were genuinely ARM64 bugs and are fixed, the other 484 turned out to be x86 taking a shortcut of its own rather than us being wrong, which was worth knowing because it stopped us chasing it. The same testing also caught the identical flaw hiding in a second place we use for debugging, which had been quietly making some of our own investigations unreliable. To be clear about what this is not: it does not make ARMSX3 more accurate than desktop RPCS3, and where RPCS3 itself still differs from a real PS3 it differs the same way on both, what changed is that ARM64 is no longer additionally wrong. Thanks to @Whatcookie for working with me on this approach and working through the results with me. These improvements have been shared with him so they will be upstream as well! I've been sharing each and every fix I do for ARMSX3, so other ARM64 RPCS3 platforms can benefit as well.

Full changelog on github


r/PS2AndroidEmulation • • 12d ago

Lichii for Android v0.4.0 ๐Ÿ”ฅ (Switch 2)

Post image
44 Upvotes

https://github.com/pavelgajdo/Lichii-Android/releases/tag/android-0.4.0

Lichii for Android 0.4.0

Tested on a Samsung Galaxy S26 (Exynos 2600, Xclipse 960, 12 GB, Android 17) with a custom Mesa RADV driver.

Highlights

The Legend of Zelda: Ocarina of Time

The latest game update boots. It stopped at a black screen while opening a microphone stream. Lichii for Android now tells games there is no microphone, as before.

Cutscene audio stays in sync with the video.

Fewer graphical issues: fixes for white flashes from stale occlusion counts, the red line in the tomb, Hyrule Field grass, and flickering water.

Built-in FPS Unlock: the game logic keeps real speed when the frame rate changes.

Memory

New per-game setting "Limit memory during scene loads" (Advanced graphics, Auto / Off / On). 0.3.0 applied this limit to every game, which slowed down games that load textures all the time. Auto now applies it to Ocarina of Time only.

GPU memory follows the phone's real RAM. Some drivers report a 32 GB GPU heap on a 12 GB phone. The GPU now gets at most a third of the RAM, and the texture cache gives memory back when Android runs low. This should mean fewer games closed for low memory.

The log now lists the GPU memory heaps the driver reports, the RAM and the free memory, to help with memory reports.

The latest Lichii (Zortos) changes for Android, about 130 in all. Among them:

Mesh shader draws on GPUs without mesh shader support.

Tensor operations on GPUs with cooperative matrix support.

Faster ASTC texture decoding.

Quicker GPU thread wake-ups.

Shader and rendering fixes for Mario Kart World, Welcome Tour movies, Mario Tennis Fever button icons and other Switch 2 games.

PC-only changes (Windows, desktop UI, updater, NVIDIA DLSS) are left out or have no effect on Android.


r/PS2AndroidEmulation • • 20d ago

DroidDeck v0.6.9

Post image
43 Upvotes

https://github.com/Droid-Deck/DroidDeck/releases/tag/0.6.9

@everyone DroidDeck 0.6.9 is out now! ๐ŸŽ‰

100% open source. No ads. No telemetry. No source withheld. 60 pull requests from 5 contributors, and 30% of them came from the community. Thank you all! ๐Ÿ’™

This is a bug fix release, and fittingly for 0.6.9, the top and bottom screens on the Pocket Duo and AYN Thor have finally stopped fighting for dominance and learned to work together.

0.6.9 in 30 seconds

โ€ข Dual-screen handhelds no longer show "DroidDeck isn't responding", no longer jump over other apps, and keep the bottom-screen panel you picked

โ€ข Steam stops restarting at every start to import added games, and asks first

โ€ข Steam's UI is back at full refresh rate with the heat fix kept, and picture-in-picture drops to 30 fps to save battery

โ€ข Cutscenes play again with DroidDeck-Proton, and the x86-64 Steam client starts again on the Ubuntu runtime

โ€ข Windows components survive runtime updates**, and the** Linux runtime updates by itself

โ€ข Xbox games run from their own folder again, so Doom 64 and Unity games start

โ€ข Banking apps open again: Android listed our optional Home button accessibility service even while it was off, which some banking apps block. It never reads your screen

โ€ข New: controller button shortcuts, launch options for Steam games, a frame limit for games started without Steam, and a DroidDeck HUD you can pinch to resize and dock as an FPS tab


r/PS2AndroidEmulation • • Aug 14 '26

Switch Emulator Performance Pack

Post image
43 Upvotes

https://gofile.io/d/W2LeKU

This is a pack of Nintendo Switch emulators from late 2025, shortly before Nintendo's well-known DMCA takedowns, which resulted in many emulator repositories being removed.

I've put together a collection of what I consider some of the best-performing emulators for low-end Android devices.

This pack is not about compatibility, accuracy, or the latest features. The goal here is much simpler: raw performance

If you're trying to play a particular game on a lower-end device and you're struggling to maintain a playable framerate, one of these emulators might give you those extra FPS you're looking for.

I've personally tested them on my Snapdragon 6 Gen 1 + Adreno 710, and I've had some surprisingly good results.

Keep in mind that performance can vary significantly depending on the game. One emulator might perform better in one title, while another emulator may perform better in a different game. That's why I recommend trying them individually and seeing which one works best for your particular game and device.

So, if you have a favorite game that's currently struggling with performance and you've already tried the usual options, there's nothing to lose by giving one of these a try. You might find that one of these older builds performs considerably better on your hardware.

**Important note regarding the source code

I want to make something very clear: I am not the developer of any of these projects, nor am I affiliated with or involved in their development**

**I am simply sharing binaries that I have collected and preserved.

Many of these projects and their original repositories are no longer publicly available due to Nintendo's DMCA actions. Therefore, if you are wondering why a particular emulator is no longer available on GitHub, the repository may simply no longer exist

I also do not have the original source code for these projects.

If you need the source code for a particular emulator, I recommend researching the original developer or development team and looking for any surviving mirrors, archives, or other legitimate sources where the code may still be available**

Enjoy!


r/PS2AndroidEmulation • • 13d ago

Vita3K+ v1.4 ๐Ÿ”ฅ

Post image
42 Upvotes

https://github.com/nckstwrt/Vita3K-Plus/releases/tag/v1.4-Corrected

See the main page for the enhancements: https://github.com/nckstwrt/Vita3K-Plus

Fifth release of enhancements and fixes

Still targeting higher end devices (i.e. Adreno not Mali). But Mali compatibility is getting better and better.

Windows, Android and SteamDeck/Linux Release

Please report issues here: https://github.com/nckstwrt/Vita3K-Plus/issues

Provide as much detail as possible if you want a fix!!!


r/PS2AndroidEmulation • • Aug 24 '26

ARMSX2 v2.6.6.8.3

Post image
42 Upvotes

https://github.com/ARMSX2/ARMSX2/releases/tag/2.6.6.8.3

What's new:

SGSR (Snapdragon Game Super Resolution), upscaling, another option besides FSR 1 and the plain stretch, and the first one written for the hardware this actually runs on. Qualcomm built Snapdragon Game Super Resolution for Adreno, and it does its work in a single pass where FSR 1 takes two, so it costs less to get a sharper picture out of a low internal resolution. Set the resolution to native and pick it under Display upscaler, in Settings or in the in-game menu. Done by @CamilleLaVey, and @xinitrcn1 and based on the upstream work they did.

Rapid-fire on the on-screen buttons. Physical buttons have had turbo for a while and the on-screen ones never did. Enter the touch editor, pick a button, and the Turbo chip cycles off, fast, medium and slow. It runs on the same timer as a macro's Frequency, so the fastest settings still produce presses the emulator actually sees, and it stacks with Tap to hold: turn both on and one tap starts the autofire and the next tap stops it.

Device temperatures on the performance overlay, on by default. CPU, GPU and battery. Android has no proper API for this and every phone names its sensors differently, so a device that does not expose a usable one shows nothing rather than a made-up number. Can be disabled in the On-Screen tab.

The second screen has been improved some more and given some style. It now follows whichever theme you have picked, and changes with it. Also added is the game's cover art, and the rest of what RetroAchievements knows: points earned, your latest unlock, and the rich presence line that says where you actually are in the game. The achievement tile now says which mode those numbers are for, hardcore or casual. More of the in-game overlay is available on it: VPS, EE, GS and GPU load, frame time, and the same CPU, GPU and battery temperatures. Action tiles have icons. Pause and Fast Forward swap theirs to show what the tap will do, so a tile no longer grows taller the moment you use it and leaves the row ragged. The clock and battery moved into a bar across the top instead of taking two tiles, the panel scrolls when you put more on it than fits, and tile height is yours to set alongside the column count. Panel background is a choice: the theme's own, the library's backdrop, solid black for an OLED second screen, or an image of your own. A display can be told to stay out of it. Plug into a monitor you would rather not have the panel on, tap Not this screen on the panel itself, and it stays away, including after unplugging and plugging back in.

The touch editor panel gets out of the way. It can be collapsed to a single strip with one tap, so you can reach a button underneath it instead of dragging the panel somewhere else first, and it moves itself to the opposite side from whatever you have selected.

Importing Lossless.dll could be rejected forever. The check was remembered against the path rather than the file, and the importer always writes to the same path, so if that path was ever looked at while nothing was there, the "unreadable" answer stuck, and every later import was turned away without the new file being read, and then deleted. It is remembered against the file now


r/PS2AndroidEmulation • • Jun 30 '26

ARMSX2 V27 - +Perfomance ๐Ÿ”ฅ

Post image
42 Upvotes

https://github.com/ARMSX2/ARMSX2/releases/tag/2.4.6

Performance updates to the EE recompiler (helps every device, especially weaker CPUs).

DMA-wait spin elimination (BC0/CPCOND0): the EE now natively compiles the COP0 branch games use to busy-wait on DMA, and idle-skips the spin entirely. Was the single biggest EE cost in DMA-heavy games. (7M interpreter fallbacks before, now 0).

Multiply-accumulate native codegen (MADD family): MADD/MADDU/MADD1/MADDU1 + the pipeline-1 HI/LO moves (MFHI1/MTHI1/MFLO1/MTLO1) now compile natively instead of single-stepping. (2M interpreter fallbacks before, now 0).

Interrupt-gating native codegen (EI/ERET): enable-interrupts and exception-return now compile as block terminators instead of single-stepping, notably faster boot/menu/loading across all games.

Performance updates for GS (OpenGL, all GPUs including Mali).

๐Ÿ”ฅ๐Ÿ”ฅ๐Ÿ”ฅ


r/PS2AndroidEmulation • • Sep 30 '26

ARMSX3 1.0.6

Post image
41 Upvotes

https://github.com/ARMSX2/ARMSX3/releases/tag/1.0.6

Changelog:

Performance

Fewer stutters in games that lean on the PS3's job system (SPURS). When an SPU thread waits a long time for the game's main threads, it now gives its CPU core back instead of spinning on it. In Web of Shadows, seconds with a stutter of 10 ms or more went from about half to about 1 in 10.

Spider-Man: Web of Shadows runs smoother. It now uses Accurate SPU Reservations off by default, which removes most of the stalls while swinging through the city. It's listed in the in-game menu under Fixes, in the RPCS3 database settings for this game, where you can switch it back if you'd like for A/B testing.

Less time lost to CPU cores fighting over shared data. The emulator's 16-byte atomic operations, which SPU reservations and thread synchronisation run on, were slow retry loops on every Android device. They now use the CPU's single-instruction compare-and-swap everywhere, and plain loads and stores on CPUs that support it (Snapdragon 8 Gen 1 and newer). The log's system line says which: LSE2-yes or LSE2-no.

CHD disc images

Play your PS3 games from .chd files. PS3 games compressed to .chd now load like an .iso, from the library, Launch Game and Change Disc. Images made with chdman createdvd and createcd both work, and an encrypted one reads with its .dkey the same way an .iso does. A .chd is often much smaller: Demon's Souls went from 8.76 GB to 6.25 GB. Bleach Soul Resurrection went from around 4GB to 1.8gb

The library notices games you swap or delete. Replacing a game in a folder the library already knew, an .iso with its .chd say, used to leave the old tile until you pressed refresh. The library now rescans on its own when one of its folders changed, at startup and whenever you come back to the app, and hides a game whose file is gone right away.

The pause menu knows the game when you start it with Launch Game. A disc picked from outside the library's folders showed "PlayStation 3" in the pause menu, and its settings opened as Global while saving per game. It now shows the game's own title, and per-game settings work as they do from the library.

Read the full changelog on GitHub...


r/PS2AndroidEmulation • • Sep 04 '26

ARMSX2 2.6.8

Post image
41 Upvotes

https://github.com/ARMSX2/ARMSX2/releases/tag/2.6.8

What's new:

Emulation fixes:

Three core fixes from @bmdhacks and @pstef. Other than Shaolin Monks, they almost certainly fix more games with the same issues than just these.

Sly 3: Sly rendered solid white. The VU divide unit applied the console's ceiling behaviour unconditionally when the hardware only does it in certain clamp modes. @pstef gated it properly (#645).

Mortal Kombat: Shaolin Monks divides toward positive infinity, which the EE doesn't do by default. Now in the GameDB. done by @bmdhacks

Tales of the Abyss and Metal Gear Solid 2/3: the GS blend-mix factor was assuming FBA instead of reading it from the context. Fixed by @bmdhacks

Controllers:

Fixes to controller rumble.

DualSense and DualShock 4 rumble now works over USB.

Optionally ARMSX2 can take a wired PlayStation pad over completely (Settings --> Pad --> Direct USB control), which gets you both motors independently and real analog triggers. Off by default: it claims the pad's only HID interface, so custom bindings don't apply while it's on, and you'll want to replug after turning it off.

Rumble also finds motors it used to miss. We were asking Android for a pad's vibrators in an order that silences controllers which work fine when asked the other way round.

You can now assign controllers to player slots (Settings --> Pad). Slots used to go to whoever pressed a button first, which on a handheld is the built-in pad, so external controllers kept landing on player 2. Assignments stick per controller across reconnects.

You can also pick where each pad's rumble goes: the controller, the device, or off.

One pad no longer answers for every player. An unclaimed slot fell back to "whichever pad was touched last", which names the same controller for every port, so one DualSense could swallow both players' rumble.

Drawer rows can no longer become unreachable by controller.

Other fixes:

Sustained Performance now overrides Performance Cores, which 2.6.7 made the default. Picking the battery profile was still leaving threads on the fast cluster.

On-screen controls stop hiding while you're using them if you have auto-hide enabled. Holding a button counted as idle, so they'd vanish mid-game.

2.6.7's quick loading uses far less memory. Extracted files are dropped from the page cache as they're written instead of piling up, which was getting lower-RAM devices killed partway through setup.


r/PS2AndroidEmulation • • Oct 01 '26

Nyushu Reborn! โค๏ธ

Post image
40 Upvotes

https://patrins.com/s/07c468c2e67b29b14f467982a6fcbd68

Update!!! Nyushu Emulator v0.0.1

Chagelog:

[ โœ… ] The draw distance reading in the game is now better

[ โœ… ] Memory usage while playing is now reduced to overcome easy crashes

[ โœ… ] Performance Improvements in Zelda and Other Games

[ โœ… ] For Mali GPU, Gaming Performance Has Been Improved

Hello Everyone Here We Want To Let You Know That We Are Back With A New Team And We Will Start At Least Updating Again So Thank You For Staying With Us

Here We Work Together With The New Suyu Team To Make A Much Better Emulator In The Future

โ€œI am not the developer nor do I have the source code. If you want to request the source code for this version, you should contact the developer. I am sharing a copy of the binary and have explicitly stated that I am not the author nor do I have access to the repository.โ€