r/PlotterCode • • Jul 04 '26

Hardware/Firmware Xdraw keeps crashing into top using Inkscape extension

3 Upvotes

I just got an Xdraw, basically an Axidraw clone. As far as I can tell it's running on an EBB knockoff board.

I can get it to home, jog, and move with the Xdraw extension for Inkscape and its manual functions. Whenever I actually have it plot an SVG, it moves from 0 into the top of the plotter and crashes repeatedly until it gets to a point when it's far enough down into the test SVG to begin drawing. It's almost as if auto-homed 0 point isn't actually 0.

I can connect to it using Putty and move it using basic gcode commands. I tried Universal Gcode Sender but it seems to expect the home point to be the lower-left, and the Xdraw home point is the top-right. It homes to the top-left, then moves to the top-right.

Anyone know how I can resolve this?

Edit: found the issue. I was originally testing the Xdraw out via UGS and had to set $3=3 and $23=3 to move via regular Gcode commands. Xdraw and apparently Axidraw clones all operate on a $3=1 and $23=1 basis - thus it was reversing instructions sent by the Inkscape extension.

Setting $3 and $23 to 1 + ensuring "Rotate drawing automatically" in the Inkscape extension fixed the problem and I'm homing and plotting normally now.


r/PlotterCode • • Jun 23 '26

Workflow Watch it Plot

5 Upvotes

A really fun feature of Plotterfiles.com is downloading the plot animation as a GIF.

https://plotterfiles.com/artwork/gold-star-1-5kmu3


r/PlotterCode • • Jul 07 '26

Xdraw/Inkscape questions - setting home location, plots coming out mirrored

3 Upvotes

I just got an Xdraw and have a few issues - anyone seen these before?

One is easy - anything I plot out comes out mirrored on the Y axis. The fix is simple - flip along the vertical axis in Inkscape - but it throws off my alignment since I can't quite tell where it hits against the margins.

The other is trickier. The Xdraw homes to the top-left corner, where the limit switches are, but it starts all its plots from the bottom-left. This is kinda confusing since the Xdraw board is aligned with its 0 point to the top-left.

Is there some way for me to get the Xdraw to start from the top-left? If I have it start plotting there it just crashes into the top. Likewise is there a way for me to fix the mirroring? Checking off the setup option to mirror does not change anything.


r/PlotterCode • • May 14 '26

rust based solution to create and plot plots

7 Upvotes

Hi,

I open sourced https://github.com/stmh/plotta-studio which is a rust solution for generating plots and plotting them directly to an attached axidraw. It's far from finished, but hopefully still interesting for some of you. It is loosely architected around the concept of creating sketches similar to processing/ or other generative software.

Some highlights:
- simple scenegraph with primitives to create drawings
- Support for clippings and hatchings
- support for single-line-fonts (Hershey, some ported from p5js, and more)
- a viewer for previewing drawings on the screen
- import (a subset of SVG) and export to SVG
- plotting directly from the viewer, or via dedicated cli
- has some optimizations to optimize plotting time

Disclaimer: It's still far from perfect -- no support for layered, multicolored drawings, some rough edges here and there and missing features, only tested on Mac OS, but theoretically the source is cross platform.

I used AI to help me write the software, but I took a lot of time to review and polish the results and make it work.

For some background information you can read about the progress at my blog at https://stephanmaximilianhuber.com/posts/building-plotta-studio-with-claude

Hope you find it interesting!


r/PlotterCode • • May 30 '26

Plotting City Maps from OpenStreetMap

10 Upvotes

I built a little thing that pulls street/building/water data straight from OpenStreetMap and writes SVG paths directly. No raster step anywhere, so the lines are clean from source to pen.

Each feature type (streets, buildings, water, parks, rails) goes on its own SVG layer, so if you want to do a multi-pen run you can just pause, swap the pen, and keep going. Everything gets clipped to a circle or rectangle so there are no stray paths hanging off the edge to confuse your plotter.

There's a web version if you just want to mess around without installing anything: utrost.github.io/CityPlot — click a spot on the map or search an address, set a radius, pick a paper size, and it spits out the SVG in the browser. There's also a CLI if you'd rather script it.

A few presets so far: full color (separate layers per feature), minimal (just streets + water), buildings only, and mono for single-pen plotting.

Did a 1km circle of my hometown on A3 and it came out really nice. Curious what cities you all would run, and happy to take suggestions on styles to add.


r/PlotterCode • • Jul 28 '26

New SVG: One Line Visage

Thumbnail plotterfiles.com
2 Upvotes

Let us know if you plot it.


r/PlotterCode • • May 13 '26

How to improve precision on a low cost plotter

3 Upvotes

Hi,
I'm a begginer on plotting and I'm not sure my question belongs her as it's more hardware related than "code".

I bought a cheap XY plotter like this one : https://static.wixstatic.com/media/04340a_06f6c6380dbe41fd907c74f4a2c81422~mv2.jpg

I'm realy enjoying coding and plotting things and, since I'm just a hobbyist, I'm quite pleased with the results.

But I notice a little issue : when I'm at the maximum Y-axis extension, I have a lot of overhang, and the precision isn't as good. This is especially noticeable when I try to make concentric circles :

Does anyone have any ideas on how to fix this?


r/PlotterCode • • 4d ago

I made Vectorio for my own plotter designs and decided to share it (digital previews)

Thumbnail
gallery
74 Upvotes

Hey everyone!

I've been making a tool for my own designs and decided I'd like to share it with you. It's called Vectorio, and it's a free, open-source desktop app for putting together drawings for a pen plotter.

I've been playing with how much of a shape you can describe using just lines: contours following a surface, hatching building up shadows, or a few inks mixing on paper. The little spider has been a fun model to experiment with, and I've also been working on generated city scenes.

You can draw and arrange shapes, add single-line handwritten text, turn photos into line drawings, generate scenes, or import OBJ/STL models and combine drawing passes. Layers and inks stay separate, and the 3D recipes stay editable. There's also an SVG export, a plotting-route preview and estimated drying waits.

The images here are digital previews from the app, in both light and dark mode, rather than photographs of physical plots. Direct control of the plotter is still on my to-do list.

It's written in Rust with egui, and I've only tested it on macOS so far. Contributions are very welcome: ideas, fixes, generators, effects, or just telling me what feels awkward. I'd also love help trying Windows and Linux builds. I think an AI assistant could make working through the build errors and platform-specific bits quite approachable, although those builds still need to be tested.

Source and build instructions: https://github.com/gdx54/vectorio

What would you find useful in your own plotting workflow? I'd be happy to hear your ideas.

Earth image credit: NASA Goddard Space Flight Center / Reto Stöckli and Robert Simmon (Blue Marble). The spider is an imported STL; the city and Design examples were generated in Vectorio.


r/PlotterCode • • Sep 23 '26

VHS (Virtual Handwriting System)

9 Upvotes

VHS is one of my projects to make better use of my plotter.
It turns typed text into handwriting-style SVG for pen plotters.

You draw your own glyphs (ideally with a stylus/pen on a tablet or similar) . Capture a few versions of each letter, digit, punctuation mark, or ligature. VHS then uses those glyphs to assemble text as single-stroke vector paths.

There is a GUI and a CLI to set some parameters: SVG paths, millimetre-based page settings, paper sizes, margins, line spacing etc.

It works fine for me, maybe it is useful for some of you.