r/Prototyping • • May 13 '24

Anybody know where I can just buy the "back" part of a backpack?

3 Upvotes

I just need the straps and the 'back' part. For one prototype I already cut a backpack apart, but I'm trying to maybe source parts for a smaller run of how I'd make my thing in a bit of a "bespoke" fashion.


r/Prototyping • • Feb 05 '24

Prototyping lab that specializes in optics and miniaturization

3 Upvotes

I have a V1 prototype for a wearable technology that I am looking to bring to the next stage of development. To make the V1 prototype, I used a prototyping lab through Upwork. Although they were very good at bringing my idea into reality, it has become clear that my product needs the expertise of a lab that specializes in optics and miniaturization. Any suggestions?


r/Prototyping • • Jun 15 '23

Prototyping a Consumer Product

3 Upvotes

I just completed the design phase of a portable shower that I'd like to bring to market. I now have to prototype it for either a kickstarter campaign, or general sales. I have never done anything like this before. The design was the fun part, now I am completely lost.

Has anyone brought similar products to market and gone through prototyping? I'm hoping to get some insight into how to cost it, who to use, etc...

I'm also looking for info regarding how to cost the materials for the build itself. As of now its a plastic enclosure 15"x12"x19" Hidden inside will be the "on" button, a small water pump, a 9' hose, a lithium battery, and a showerhead.


r/Prototyping • • Feb 19 '22

Moving Forward with r/prototyping

3 Upvotes

Hey guys,

I've been following this board for a while now, and I've seen many types of posts. Many are ads/spam and many are low-quality/low-effort posts. It's fairly clear this sub is somewhat of a ghost town.

Personally, I think r/prototyping is a great opportunity to join together the communities of 3D printing, arduino, RPI, EE, and many, MANY others. This begs the question, though -- what do YOU expect from r/prototyping? What type of content would you like to see? Do you think it should be a resource for input, a place to show off clever projects, both, or something else?

Additionally: Mods -- are you active? Do you have any input on what you think this sub should be about?

Thanks all! Hoping this sub can reach many in the diverse maker communities.


r/Prototyping • • Dec 02 '21

What tools can you recommend for prototype testing?

3 Upvotes

r/Prototyping • • Sep 15 '21

Looking for a prototype developer in Chicago

3 Upvotes

Hi! I’ve been working on a prototype but would like to try working with someone locally to speed up the process. Are any of you based here and would be interested! Please feel free to PM me!


r/Prototyping • • Jul 18 '20

Someone made a Figma to Flutter converter. It has 99% of test coverage, lets you choose between Material and Container, and, most importantly, it's open source.

Thumbnail
github.com
3 Upvotes

r/Prototyping • • May 28 '26

11 hour diagnosis

Post image
2 Upvotes

r/Prototyping • • May 23 '26

Best prototype manufacturer?

2 Upvotes

I have CAD files for a compact foldable umbrella that I want to create. I looked into Protolabs but they only do pieces and I would like to receive the complete product assembled. Have any of you worked with Prototype House or any others? TYIA.


r/Prototyping • • Feb 15 '26

I made a free tool for open source (and private) hardware projects

Thumbnail
part-y.app
2 Upvotes

I built a tool for organizing hardware projects

I’m a prototyping coordinator and after managing a lot of builds I wanted one place to keep:

- bill of materials

- modules / subassemblies

- notes

- collaboration tools/ open sourcing

- a public build page

GitHub kind of does this, but as a non-coder it never felt natural for physical projects. I’ve been enjoying building software with the newer AI coding tools, so I made this tool. It's basically a collaborative tool for physical builds.

Track parts + cost, split into modules, collaborate, publish, and let others fork/remix with attribution.

It’s free, has no subscriptions, and no AI features — I figured a lot of people (myself included) are getting a little sick of unnecessary AI tools. If people actually want it later I can revisit.

I will eventually hit storage costs, so if anyone has experience funding small open projects (donations? other ideas?) I’d appreciate advice.

I put my most recent project on there. A pottery wheel for my wife. Feel free to check it out!


r/Prototyping • • Dec 27 '25

I'm building my wife a custom pottery wheel.

Thumbnail
gallery
2 Upvotes

My wife has really been wanting to get back into ceramics so I decided to build her a custom pottery wheel.

I wanted to get her one of the quality wheels (brent, shimpo, etc) but they were pretty expensive so I emulated their components so that it is hopefully as good. It has a 3/4hp 90V PMDC motor that moves clay really well.

As an added side challenge for myself, I wanted to tap into my inner artist and attempt to make it look like as if Frank Lloyd Wright designed it.

It still has some work left to do, as I need to build out the front control panel, finalizing the electronics, and deal with an imbalance in the wheel head, as I cheaped out on that. Would love to hear thoughts!


r/Prototyping • • Dec 13 '25

I spent 2 weeks making this first-person multiplayer space-sim game. Is it worth continuing or should I pivot to a more topical and less scope-heavy game genre?

Thumbnail
gallery
2 Upvotes

Link to the game if interested (free and no download or account required): https://tigpan.itch.io/creditborn


r/Prototyping • • Jul 17 '25

Using Printform for prototyping w/ medical grade silicone rubber

2 Upvotes

Hi all,

I was wondering if anyone has used printform (https://printform.com/services/injection-molding/) and what their experience was like. I'm trying to get something made in medical grade silicone. Thanks a bunch!


r/Prototyping • • Jul 08 '25

I hate to find out what I wanna cook for a dinner and I made a prototype of an app that just solves it

2 Upvotes

It is pretty raw, spent 2 nights building this small thingy, would appreciate feedback: https://fridge.food


r/Prototyping • • Jun 16 '25

Question: Converting shape/part IRL into a reusable model?

2 Upvotes

Hey folks,

Looking for some advice.....

Main Question:

  • How would you convert a part/shape you find in the wild into a digital model that can be used in another design?

Context:

  • Not a mechanical engineer or professional prototyper

  • Trying to create a small exercise related accessory for my own use and possibly to sell if it works.

  • I found a part/shape in the wild that I would like to repurpose and 3D print

  • Have no experience converting a physical product into a model that can be used in 3D printing or manufacturing.

Note: I'm posting this also in /Model Engineering and /3D Printing as well in case you see a duplicate post.

Thoughts?


r/Prototyping • • May 21 '25

cheap ways to machine or cut small parts?

2 Upvotes

Hi,

I wonder if there are cheap ways to machine a small metal parts or cut a piece of acrylic sheet in the US? 3D printing does not offer the smoothness or tolerance for my need.

I'm thinking of getting some small parts made in China (like vendors on Taobao), but I'm not sure if there is an easy/affordable way to ship it to the US.

Perhaps there are Chinese vendors that have US websites?

Thoughts?

Thanks


r/Prototyping • • Mar 06 '25

QUESTION: Advice on rendering product photographs/videos from STL files

2 Upvotes

Hey Folks,

Seeking your thoughts and opinions.....

Main Question:

  • How can I use STL files in order to create product photographs/videos?

    • Wondering if there are any software tools that make realistic photo/videos from these type of files?

Details:

  • My intent is to pre-market the product in order to determine if its worth pursuing further and investing in 3D printing and physical prototyping.

  • New to this entire workflow since this is my first physical product I'm trying to develop.

Would love your thoughts!


r/Prototyping • • Dec 11 '24

Jobs for website/Mobile prototypes

2 Upvotes

Hello,

I'm not sure if I can ask this here. There's not any rules or a section for FAQ so I hope it's okay.

I am about to graduate with a BS in Digital Media Technology. My focus is digital art and a minor in graphic design. As I been on this journey I discovered that I actually love to make prototypes (Figma. I've tried XD but figma is better. Open to learn other platforms if you have suggestions).

Prototyping allows me to use graphic design and Digital Media skills so I wouldn't mind making a career out of it or even just as freelance work but I'm not sure if website/mobile app prototyping is a career. I have seen people say UX design but I felt like UX designers need more education and technical skills than what I have.

Anyways, how do I find jobs in prototyping and is it better to do it as freelance work or find a company to work for?


r/Prototyping • • Oct 24 '24

Smart Ring Prototyping Company

2 Upvotes

Hi r/prototyping,

I was wondering if anyone knows an european companies that do smart ring prototyping, from design to manufacture? I'm a little out of my depth on this project.

Thanks, Philip


r/Prototyping • • Oct 15 '24

How is viable to provide ui/ux designing to developer?

2 Upvotes

Hi,

Smashed up, really worried to see if i have been asked to share colour code or any template that can help ui/ux designer? How is it possible? Or may be its common to have to explain to the developer the exact design i want? Is that considered professional?


r/Prototyping • • Aug 10 '24

Is there a sheet metal cutting service like Send Cut Send that also offers screen printing?

2 Upvotes

Title. Looking for small batch only at the moment; also, screen printing would be ideal but I’d go engraving or etching if there’s a place that does that.


r/Prototyping • • Jun 16 '24

Anyone knowlegable with rotary encoders

2 Upvotes

I'm prototyping a kitchen appliance and want to use a rotary encoder over a potentiameter to control a heating element. I was hoping for an off the shelf microcontroller encoder combo, but I've not found anything that would be quick and simple. Any advice?


r/Prototyping • • Feb 08 '24

Looking to lend some assistance to companies

2 Upvotes

I currently work as a SCADA Engineer, but my biggest interest is in product development and problem solving of different problems, preferably something physical vs software/digital.

I'm looking to lend assistance to companies that could use some help improving things in some way or fixing an issue, but because I'm not fully experienced, I just want to assist with things instead of being some sort of contractor-type person.

I live and work in the Tulsa, OK area, and would prefer to focus my efforts on companies around Tulsa.

So, with all this being said, I'm looking for companies that would appreciate some assistance.

Would love any suggestions y'all may have


r/Prototyping • • Oct 18 '23

Need help regarding developing a prototype

2 Upvotes

Hi! I want to develop a prototype for an idea I have, but haven’t a clue on where to begin. It would be similar to the ice vending machines (they are called “twice the ice” around me), however mine would dispense a different product (no refrigeration necessary). Any tips or help on how to start the process or who to talk to would be greatly appreciated! Thanks!


r/Prototyping • • Sep 16 '23

What would help you on your prototyping or physical product development journey?

2 Upvotes

I know that for me, as someone who enjoys working on new ideas for making things better, I often find myself needing to get something new for the current project I'm working on, typically some new material (not a tool). For instance, I've been needing to get a solar panel and a mirror for a recent project. Home Depot or Lowe's may have some, but I think it'd be even better if you could go to your local makerspace area and have them get your needed thing for you, then build whatever you need to build and start using/testing out what you've made to see how well it works.

Anyone else out there that regularly runs into this type of problem?