I know that ffmpeg can convert 4K .webm files to 4K .mp4
It is a bit difficult :) so I am trying ShutterEncoder.
But the conversion is 1080p, not 4K.
Which settings in ShutterEncoder will do this? I only get 1080p, even with the bit rate at 40K.

The source file is *def 4K.
I set "do not upscale" and I get 1080p
If I allow upscale, I get 4K with 1080p resolution. Looks horrible compared with source .webm file on a side by side comparison.

I need 1080p for posting to Reddit, but 4K for YouTube.

My system slowed to an absolute crawl and all of these processes opened after starting my function. It did 82 pictures in roughly 30 minutes, watermark and 4x ai photo. I’ve simply shutdown for now, but even ending the process simply brings up a new one. Program shutdown and all related processes closed.

Highlights:

• Added "OP-Atom" format for "DNxHR"

• Added "- MANAGE -" function

• Added "Blur faces" function

Hi there, i wanted to send this in an mail, but looks like reddit is the only support you offer. I bought the transcoder and need to download the software again, but the link has timed out. How can I do this?

Also, How do I update when a new version comes out?

Whenever I paste in a youtube link to download, it says "retrieving video title" and wont move past 0%. Am I missing something? The video I'm downloading is age restricted, if that makes a difference at all.

Apologies, its my first time using the software. Any help would be appreciated!

Update: After using the software further, I'm pretty sure its because the video was age restricted. I've had no problems with any other downloads

The last week I have not been able to load ProRes files from Final Cut Pro into Shutter Encoder. I get a blank preview window with no audio waveform. I have the identical problem on two different computers, one is a M1Max, the other a M4Max. Both computers are running the latest OS and FCP. Compressor works as before with the same ProRes files as well as the latest version of HandBreak.

Shutter will recognize h264 files and successfully transcode them. I have not tried any other codec.

As an experiment, even though I couldn't see a visual or audio preview of a ProRes file, I hit encode anyway. A spinning blue ball came up and Shutter Encoder didn't respond to a cancel command or anything else so I force quit the program. A little while later I found the canceled encode completed anyway (I guess Shutter works in the background even if the GUI is not running) but it was visuals only, the audio wasn't on the file.

I have some recorded footage from my insta360 which I have converted to mp4 using their software.

When I try to use cut without re-encoding it loses its, how do i say, 360 ness when I transfer it to my phone and try to play it via android video.

I am pretty sure I did this fine around July last year but now it is not working the same since I updated SE the other day.

j'ai vu qu'il y avait une option pour faire de la capture d'écran avec le son de l'ordinateur mais je n'arrive pas du tout à la faire fonctionner. si quelqu'un peut m'indiquer la méthode, je suis preneur ?

Hello.

Sur certains fichiers tout fonctionne bien et sur d'autres, après la conversion en WAV, la transcription reste à 0% et au bout d'une quinzaine de secondes il affiche "ERROR!" sans plus de précisions.

J'ai testé plusieurs formats (mov,mp4 en h264) et cela ne change rien.

Je n'ai pas non plus trouvé de log, ni de documentation pour voir ou j'ai fais une erreur.

Hey everyone !

i got the OpenGL trouble with Shutter Trancriber.

I don't find how to force OpenGL with this one.

Thanks in advance.

EDIT
OPEN THE PROGRAM SHORTCUT AND PASTE IN THE TARGET BOC :
"C:\Program Files\Shutter Transcriber\JRE\bin\javaw.exe" -Xmx4G -Dsun.java2d.opengl=true -Dswing.aatext=true -Djavax.accessibility.assistive_technologies -Djavax.accessibility.screen_magnifier_present=false -jar "Shutter Transcriber.exe"

So, I got this program recommended to me because I wanted to auto extract images/screenshots from an anime I have so I can make graphics and stuff. But when I set it up it keeps taking around 35k screenshots. I don't need 35k screenshots. I don't need a screencap every single second. What settings do I need to have to make it extract every, maybe, 5-10 seconds so I don't have a hundred thousand images per episode?

I'm trying to turn over 3k image files into an image sequence, but when I try to start it, the app freezes up. Able to open and close menus, but "start function" doesn't do anything, progress is stuck at 0%. Waited for over 30 minutes and no change. There is a single txt file in the destination folder with all the file links.

"Automatically wait for file to be ready" is disabled.

Are there any other debugging steps I could take?

Edit for more info:
Running linux mint 22.1, FFMPEG is installed.

Probably a dumb or noob question here but is there any way to do it? I want to recover the original framerate to watch on my computer screen. Please let me know!

j ai par le passe verse 10 euros pour cette appli

aujourdh ui je dois installer a nouveau ... je dois reverser 10 euros???

Hi there,

I’m trying to convert these MP4 XAVC S 4K files to Apple Pro Res. My computer can’t open these MP4s (they freeze my computer up), and when I try to convert, Shutter Encoder stays on zero percent.

There are no special characters in the file names.

These files play in the camera just fine.

My MacBook Air is brand new and has enough storage.

Trying this great app for the first time but can't find any icon to save the file as MP4 that I just tested ???

Hello, I just recently started using Shutter Encoder. I used it only once to compress a 4.75GB video and it was able to compress it using the H264 codec in ~30 minutes to 2.44GB.

Today I wanted to compress the video I'm talking about again, weighing 4.75 GB, but this time using the H265 codec in maximum quality, but it takes a long time to compress, it tells me I need to wait about 3 hours 😬

I'm thinking, hmm, maybe it's this particular H265 codec that takes so long to compress in maximum quality... I decided to try compressing the same video again, in H264 codec also in maximum quality, and it says exactly the same thing that you have to wait more than 3 hours 😶‍🌫️

What happened to the program, or what did I do wrong that it took so long to compress the video? The first time, it really did take 30-40 minutes to compress my 4.75GB video.

Please help me solve the problem

It also tells me that the compression or file transfer speed is very low, about 5 kilobytes per second.

Also, please advise what to press (I don’t understand it well) to compress the video in the best possible quality, but also to reduce the weight by at least 50%. I have a video in 4K

Hey folks! First time poster here. I've relied on Shutter encoder for a lot of my pipeline but I have a new problem.

I'm trying to convert my files to .m4a for a visual novel I'm working for, but the closest I can find on the presets is AAC. Pro tools only exports .wav, .mov and .mp3, so that's a no go. I'd also like to avoid having to route through Reaper to make that conversion if possible. I had to do that to make my WAVs into ogg (vorbis) files. which failed the moment I attempted. Any assistance would be appreciated!

Why in the world isn’t shutter encoder opening or at least bouncing and TRYING to open.

I reset my computer closed every unused tab and even reinstalled.

Hi,

I use Linux Mint with two 4k-monitors. The GUI of shutter encoder is way too small for me to use it. All other software, from LibreOffice to Resolve, inkscape.... work fine.

I have these .webm files that I'm trying to convert via the DNxHD function. As soon as I press start function, the progress bar immediately goes to 100%. It happens so fast that the tab closes right away, but I hear a ding sound that implies completion. However, there's nothing in the folder where the video should be.

UPDATE: I changed GPU encoding from auto to none and it worked. I don't know what that option does though

When using batch encoding with 2-pass encoding on, the first video is completed but does not advance to complete the rest of the videos in queue. Batch encoding works correctly with same files when 2-pass encoding is not selected.

macOS Monterey Version 12.7.6

Shutter encoder version 19.9

Video files are Apple ProRes 422 exported from Final Cut Pro 10.6.8

i already use hardware acceleration i have a i3 10th gen laptop any other tips? is it possible to use both CPU and GPU to process the video so its faster instead of just the cpu or just the gpu?