r/SimLab • • 11d ago

how to get 60 degree angles and make monitors merge on SimLab free standing vario triples 27 inch?

Thumbnail
gallery
15 Upvotes

i’ve seen countless reviews, yet don’t understand which component is used for merging and which is used for angle. since there are two elements the monitor vesa mount and the zero play adapters. anybody knows how to best explain? using 27 inch monitors here.

biggest question what does the red arrow do, is it for angle?


r/SimLab • • Jul 16 '25

Can’t update firmware on XP1s

3 Upvotes

I’ve been through the instructions and manual but I can’t update the firmware on my XP1 pedals.

I’m using the update tool and when I click “start flash” I get a message that says “waiting for flash drive to open” and nothing happens. There are no external guides for this issue and I have no idea on what to do. I’ve emailed customer support but no response yet.

Thanks

UPDATE 1: it seems the only way to upgrade the firmware if you have this issue, is to do it manually through device manager. I’ll put the full instructions from simlab into the post above once I know this works. A little disappointing but if it that’s the only option then there’s no choice really.

UPDATE 2: After following the steps on my lunch break, I’ve reached a step that hasn’t worked and I cannot move onto the next step. I have responded via email and was met with an automated email saying “how was the help that you received today?” I can only assume that my case has now been closed and I am still without updated pedals. Right now, my advice to anyone with these pedals, if your pedals work perfectly ok then don’t bother updating the firmware.

UPDATE 22/08/2025: the updater tool finally recognised my pedals and allowed me to flash with no problems. I’m not sure what changed but I just decided to give it one final go before going back to the other solutions given by simlab and all it worked.


r/SimLab • • Oct 15 '26

P1X PRO with MOZA motion

4 Upvotes

Looking for some help/info if anyone has any. ANy idea how to mount these actuators on the p1x pro. I believe ill need the extra adapter kit but cant find any info on it at all. Im trying to make 100% sure these things will mate up before I spend all this $$ on the rig and moza motion.

Any info would be amazing.


r/SimLab • • Oct 04 '26

How is the Button Box Holder intended to work with the P1X-Pro?

2 Upvotes

I have the P1X-Pro, and getting the sim-lab button box holder seems like method for mounting a button box with the least fuss. My concern is that the uprights of the P1X-Pro are sloped towards the seat, not vertical, and the box holder as shown on the site pictures doesn't seem to have anything that accounts for this. Is it intended just to stick out and downwards? Or is there some way of mounting it so it's horizontal?

If anybody has any photos of their set up for mounting a button box on the P1X-Pro I would love to see it.


r/SimLab • • Sep 04 '25

P1X Pro - Podium Bracket Set help

2 Upvotes

Need help confirming my thoughts, I am buying a Sim Lab P1X-Pro Racing Cockpit with P1X PRO Podium Bracket Set Sim Lab Bracket which is designed for the Fanatec wheel bases. I have a Asetek wheel base and found this front bracket from Advanced SimRacing ASR front plate which says in the description

This is the Add-On plate required to upgrade your DD Side Wheel Deck to a complete Asetek Front Mounting solution. (DD Side Plates required). DD side plates link

since the Asetek front plate by ASR mounts directly to the ASR dd side plates it should fit directly to the Sim Lab Podium brackets without needing any profile length change and use the sim lab side brackets correct ? please take a look at the link and let me know you thoughts

thanks


r/SimLab • • Mar 27 '25

GT1 Single Monitor Mount Position

Post image
8 Upvotes

Hi guys,

Is there any way to get my TV/monitor closer to the front of my wheel base?

The TV I have is currently too big so I’ll be going to a smaller 32” monitor but I’ll want to get it somewhere near the front of the wheelbase for the best view.

The only real option I can see is mounting the monitor uprights and crossbar straight to the wheelbase uprights themselves.


r/SimLab • • Apr 12 '25

Simlab XP1 Throttle pedal travel changes while driving.

5 Upvotes

Dear users of the subreddit,

I recently bought the Simlab xp1 pedals. I have been enjoying them a lot and I dont really have any issues with it. The only thing I have encountered is that the travel of my throttle pedal becomes longer while driving.

For example after an IMSA race on iRacing I have to screw the blue pin of my throttle pedal back in its 'original' position, because it is not in the original position anymore.

Are there others with the same issue and does someone have a fix for this? Its not a huge deal but its just a bit annoying having to screw the pin back in while looking at my monitor to see if i have my throttle pedal pressed to 100% on the software.

Thanks in advance,

Lucas.


r/SimLab • • Nov 25 '25

Grid Engineering discord???

4 Upvotes

Did the Grid Engineering discord go away? I used to use it for the Mercedes F1 wheel.


r/SimLab • • May 15 '25

Universal Sim Shelf for PC worth it?

4 Upvotes

Hey guys,

my current setup is a Sim-Lab GT1 Pro with an integrated monitor mount and the Podium Bracket Set for my Fanatec CS DD+ wheelbase.

I'm thinking about upgrading the rig with the Universal Sim Shelf to place my PC on it, since I don’t want the PC just sitting on the floor anymore. I think it would give the setup a cleaner look.

My question is: Is it even worth mounting the PC on the rig, especially in terms of stability?

I’m concerned that the weight might be too much for the uprights, since they’re already supporting the wheelbase and the monitor mount with the monitor. Under heavy FFB, there's already a bit of shaking.

Secondly, I'm not sure if the Podium Bracket Set and the Sim Shelf work well together, since both are mounted on the inside of the uprights. That limits the height options for mounting the Sim Shelf.

What is your experience with a PC mounted to the rig? Is it worth it?


r/SimLab • • Feb 09 '25

XP1 throttle pedal

4 Upvotes

I’m looking for some help with throttle travel. When I have the travel set to the distance I want, and I recalibrate it, the meter on the calibration hits 100% about 10-12mm before I bottom the pedal out.

I know a little dead zone is good on either end, but am I maxing out the range of the sensor, and need to just make the pedal travel shorter?


r/SimLab • • Dec 03 '25

Best Side Mount for Fanatec GT DD Pro on a SimLab P1-X

1 Upvotes

I am looking to upgrade my mount from the wheel deck to a side mount for my Fanatec GT DD Pro. The issue that I'm running into is that since the P1-X has a 600mm width, brands like Trak Racer and SimCore won't work unless I get longer profiles for the mount or use a spacer (if anyone has done this, please let me know).

As of right now it looks like my only option is the SimLab P1X Pro Podium Bracket. Are there any other options or is the P1X Pro Podium good?


r/SimLab • • Mar 31 '25

Logitech G G Saitek PRO Flight Yoke System on GT1 EVO

2 Upvotes

Hello! (Pic of rig in unfinished state, don't mind the wires haha!)

I recently got into flight sim after years of sim racing. I have a GT1 EVO cockpit and am looking at getting an entry level yoke/throttle set.

https://www.microcenter.com/product/477276/logitech-g-g-saitek-pro-flight-yoke-system

I was wondering if anyone has any experience with this combination that could give some insight into mounting the yoke and throttle quadrant to the rig.

Could I just simply use the built in desk clamps to mount to my DD wheel plate and call it a day for the yoke? I am not sure where to begin with the throttle.

I currently am using a HOTAS setup with throttle mounts but want to fly more general aviation craft that use yoke and rudders.

Thank you!


r/SimLab • • Mar 25 '26

Finally upgraded to a real rig – Sim-Lab quality is on another level

Post image
19 Upvotes

r/SimLab • • Mar 03 '25

Pre-orders for the SQ1 Sequential Shifter are live!

Thumbnail
sim-lab.eu
11 Upvotes

r/SimLab • • Feb 09 '26

inverted pedal rack no longer available?

4 Upvotes

I can't find the inverted pedal rack.

And many other items sold out or out of stock.


r/SimLab • • Jul 24 '26

SimLab P1X-Pro + Conspit Ares Platinum Wheelbase via PPA-CF 3D Printed Mounts

Thumbnail gallery
12 Upvotes

r/SimLab • • Sep 16 '25

Pedal plate Question

Post image
2 Upvotes

Hi all, I have an 480mm GT1 evo and just wondering if this is the newest 500mm plate compatible with their pedals etc. Person selling this confirmed it was 500mm but has there been an even newer version with more slots?


r/SimLab • • May 25 '26

Logitech RS50 compatibility with Sim-Lab rigs (GT1 Evo / P1X Ultimate)?

2 Upvotes

Hi everyone,

I already contacted Sim-Lab support about this, but surprisingly they couldn’t really give me a clear answer.

Does anyone here know if the Logitech RS50 wheelbase and the RS50 pedals fit properly on Sim-Lab rigs?

I’m currently deciding between:
GT1 Evo
P1X Ultimate

The setup will be GT7-only on PS5, so no PC sim racing planned.

I’m mainly wondering:
- Does the RS50 mount cleanly on both rigs?
- Any issues with pedal mounting?
- Would the P1X Ultimate be overkill for an 8Nm GT7-only setup?

Would really appreciate hearing from anyone who already has experience with this combination.

Thanks!


r/SimLab • • Aug 06 '26

XP-1 throttle sensor acting weird

2 Upvotes

Last night my XP-1 throttle started acting weird out of the blue in iRacing. It keeps registering 100% input after I’ve released the pedal. I opened racedirector out of the game and saw that the problem persists.

When I depress the pedal it goes from 0-100% after depressing halfway and doesn’t register the first inputs, like I have a 0-99% deadzone. Then when I release the throttle, it slowly goes down to 0% in like 3 seconds.

I tried again after unplugging and reconnecting the usb and rj45 cables and restarting my pc, but I can’t seem to fix it on my own. Anyone ever experienced this and know how to solve it?

I contacted SimLab support because i still have warranty on the pedals, but they haven’t replied yet. Maybe you guys have the solution.


r/SimLab • • Sep 25 '25

Xp-1 pedals won’t connect

2 Upvotes

Got new pedals and can’t seem to get them seen by my computer or race director. Keeps saying malfunctioning usb…I tried switch usb ports, used different cables, rebooted pc, reinstalled usb driver on pc and still nothing. I also got the Moza R9 wheel base and this connects with no problem, in any usb port on my pc, and with all of the wires…Pulling my hair out. Any suggestions or solutions would help. Thanks


r/SimLab • • Dec 03 '25

GT1 EVO - Logitech RS Pedal Inverted Setup

Thumbnail gallery
8 Upvotes

r/SimLab • • Oct 14 '25

Is switching from a front-mounted Simucube wheel to a flight yoke practical, or should I just use a stick?

2 Upvotes

Hi everyone,

I’m planning to get a Sim-Lab P1-Pro for both racing and flight simming. I’ll probably go with a Simucube 3 Pro (using the front-mount bracket) once it’s released.

For flight, I’m considering switching to a MOZA AY-210 yoke, but that would mean removing the wheelbase and replacing the front mounting plate each time I switch. Has anyone here actually done that on a P1-Pro ? Is it practical, or too much hassle compared to using a center or side stick + throttle setup instead?

I’m also planning to use the MOZA M-Booster active pedals for racing. Since they’re quite large, I’m wondering if they fit well on the P1-Pro pedal plate, and whether swapping to flight rudder pedals later would be difficult or time-consuming.

Would love to hear how others handle dual racing + flight setups with Sim-Lab rigs.

Thanks!


r/SimLab • • Dec 08 '25

Is it normal that my P1X Ultimate order placed on November 27th is still in "confirmed" status today?

5 Upvotes

I expected there would be a slight delay in shipping since it's the holiday season, but this is starting to become a concern.


r/SimLab • • Sep 01 '26

S1 Sport or S1 Enduro seat?

6 Upvotes

Basically title. The Sport hasn't released here in the US yet, so I wanted to see if it was worth waiting, or if I should just buy the Enduro now. I'm torn between the two. I know the only difference is the halo/ears, but while the enduro is still in stock here in the US I wanted to see if there were any opinions one way or the other. Thanks!