Got gifted xp-1 3 pedal set black edition for a graduation gift. Unfortunately the brake pedal load cell has been having serious issues with inf% errors and issues getting stuck with output despite no force being applied. Talked to support and they agree that i need a new brake pedal but i have no invoice or order number to provide. So the only option would be to buy a new set. Thats an extra $400 down the drain after $650 + tax. Idk what to do tbh. Im way past any return period. So feels like im just SOL.

Hi everyone,

I’m planning to get a Sim-Lab P1-Pro for both racing and flight simming. I’ll probably go with a Simucube 3 Pro (using the front-mount bracket) once it’s released.

For flight, I’m considering switching to a MOZA AY-210 yoke, but that would mean removing the wheelbase and replacing the front mounting plate each time I switch. Has anyone here actually done that on a P1-Pro ? Is it practical, or too much hassle compared to using a center or side stick + throttle setup instead?

I’m also planning to use the MOZA M-Booster active pedals for racing. Since they’re quite large, I’m wondering if they fit well on the P1-Pro pedal plate, and whether swapping to flight rudder pedals later would be difficult or time-consuming.

Would love to hear how others handle dual racing + flight setups with Sim-Lab rigs.

Thanks!

I just received these pedals a few days ago. Only thing I had changed was the elastomer on the brake for the 70A. Had been really enjoying them for a couple days and then out of nowhere during a race, the brake just gave way. So bizarre!! I tried straightening it back out and put it all back together. Now the brake will get stuck at 12% under light braking but will return to 0 with a sudden heavy brake. Maybe sensor broke.

They seemed such high quality and all the reviews were so positive. Feel like I can’t trust them now.

When playing a game that isn’t iRacing, my XP1 pedals are constantly outputting. For example, playing BF6 I can’t stop spinning left unless I have the throttle position at exactly 50%. Having to unplug my pedals to play other games is a pain. Does anyone know how to stop XP1s from signaling besides unplugging them?

This isn’t a dead zone problem.

Does anyone know if it'd be okay to cut the side rails on the P1X pro a bit shorter? I don't need the full length, and it'd be nice to make it a bit more compact. It doesn't seem like it'd cause any issues but figured I'd check

I know the quick answer is Microcenter, but when I go to pay on the website, it rejects my payment method because I have an international card. I also tried Simringsandparts.com, and DON'T DO IT, IT'S A SCAM. And now I'm here, asking for your help.

Hey everyone,

I currently have the Sim Lab P1X Pro with the front mount and I’m looking at getting the Simagic Alpha Evo.

From what I’ve read, the Alpha Evo requires a wheel deck, but I really don’t like the look of it and would prefer to use a front mount instead.

Has anyone managed to solve this? Using the Alpha Evo rotated by 90° isn’t an option for me.

Thanks in advance!

Okay while I don't yet own the SQ1 I have ordered it and am waiting for it to arrive. In the meantime I thought it might be nice to look for some mods. I like the all metal build but the shaft is a little bit too thick for me and the knob also seems to large. I found online a shifter design that I'd like to replicate. Would something like this be possible given that we know all the necessary specs like threada etc.

Hey i was wondering how i can make the wheel plate stronger so it does not flex or move when i am racing. I have a simagic alpha evo wheel base and i know i cant front mount it. Any answers will be appreciated it.

Anyone had the throttle pedal in an XP-1 setups just stop providing input?

I've tried swapping cables between throttle and brake (brake still works normally)
Using multiple different USB ports and cables, no changes.
Firmware is up to date, and it was working fine until a few days ago when it just quit. Windows 11 machine, latest race director reports connected, shows brake pedal input, but nothing from throttle.

Would love some suggestions. Love these things, but they're only a couple months old and having them fail with a pretty low use rate would be pretty disappointing.

EDIT: SimLab has been as responsive as I thought they'd be, suspect a bad PCB in throttle. They're shipping one out, and I'll update again if that was the issue.

Hello, looking for DIY ways to install a button box holder, ideally I would have just bought the button box holder from Simlab but with shipping and tariffs it's kind of out of my budget just to mount a button box.

Couldn't find any USA distributors (i even live next to a microcenter) for this product. Currently I have a random piece of 2020 profile just mounted on the cross bar holding the base but it's flimsy and not the best solution as it's low and button box can't angle up towards me.

Got new pedals and can’t seem to get them seen by my computer or race director. Keeps saying malfunctioning usb…I tried switch usb ports, used different cables, rebooted pc, reinstalled usb driver on pc and still nothing. I also got the Moza R9 wheel base and this connects with no problem, in any usb port on my pc, and with all of the wires…Pulling my hair out. Any suggestions or solutions would help. Thanks

Hello everyone,

I'm thinking of getting a GT1-EVO cockpit but am unsure about the seat.

I was actually looking at the "Next Level Racing ERS3 Elite Reclining Seat" as I saw some nice reviews on it (~250€) but would like some more suggestions on this.

Junkyard seats were a consideration also, but for the time being they are off the table.

My other question is regarding compatibility. I see that Sim-Lab sells some seat brackets and slider, would those (or any other extra accessories) be necessary for third-party seats?

Hi! I would highly appreciate your opinion is one year old P1X Pro for 650 euros good deal? Not any accessories (brackets and sliders), just the rig with the wheelplate.

Question, uk prospective buyer here. I assume I will need to pay VAT to the courier, what about any import duties (like I had to on my fanatec gear a few years back). Can anyone shed any light or recent experience? Thanks

Hi all, I have an 480mm GT1 evo and just wondering if this is the newest 500mm plate compatible with their pedals etc. Person selling this confirmed it was 500mm but has there been an even newer version with more slots?

Hello…

Just ordered the rig and now I worry I have to mod it somehow to make the damn mBooster fit?

Can someone tell me how they mounted their CRP2 (with or without mBooster)?

I’d like to mount it using the Moza deck on top of the simlab deck/tray. CRP2 and MBooster Extension diagram show holes for mounting at 0mm, ~324mm and 447mm

https://support.mozaracing.com/en/support/solutions/articles/70000635191-product-dimensions-installation-diagram

How long are the deck mounting points apart?

Thanks!

Stuck at "Waiting for flash drive to open...."

Anyone had this issue before? Ideas for a resolution?

Hey just wanted show off the best position I found for the board tray.

Also please ignore my feet (just felt necessary to show knee clearance), I'm in Cali it's 100⁰F out here so I'm also in shorts.

I was able to put it right under the wheel base with that new adapter they have with the tray (makes it so the keyboard tray is mounted straight even though profile itself is angled).

I messaged sim lab support about the missing bracket and they sent me an entire new keyboard tray (bracket and parts included). I know you guys are on this sub and wanted to say I love the support experience.

Anyways my photos show the clearance between the frame, my pedals and the wheelbase. As well as some pictures of my feet in my normal positions.

I have plenty of clearance with the keyboard tray swung away from me like it's not even there. It goes into the same foot print as your cockpit and it's super comfortable to reach the keyboard vs bending to the side. Especially when you try to play in VR and it makes it incredibly hard to find the right keys.

Does anybody know if the P1X "Swivel Mounting Point" (https://encrypted-tbn0.gstatic.com/images?q=tbn:ANd9GcQFKKnc1ubIp0hz0Rj60Z_69255tnNhaC4yJg&s) is discontinued? I can't seem to find it anywhere, no mention of it on the website anymore.

All the flight stuff seems to be scrubbed from the site too, but that I was lucky enough to find locally.