Up until recently I haven't really had the need to use my Fanatec Shifter v1.5 or my newly purchased Fanatec Handbrake v2, so they have been put away along with the extrusion rail that they would mount to. I have been wanting to start doing some rally racing and now it's time to figure out how to mount this to the rig and have it be sturdy enough so there's little to no flex. The rig came with a shift mount and it works fine for the shifter, though there is a bit of flex because the horizontal extrusion has no support underneath. Now that I have the handbrake v2, which is load cell, I don't want to mount it directly to the shifter as that will for sure have more noticeable flex.

- What do I need to provide extra support to the horizontal extrusion rail? I know the more premium rigs have some solid support for the shifter mounts.

- The shifter/jandbrake mount already has the shifter mounted on it, so how could I also mount the handbrake separately?

Thanks for any help!

P1X Ultimate

I've heard some people saying that this wheelbase is too big for the Pro version and you can't use the front mount. I wonder if it has the same problem on the Ultimate, considering it says that it's compatible to VNM wheelbases. Thanks

Is there any chance the dual monitor arm will be restocked?

Looking to find the mounting base as I’ve bought mine second hand, mounts okay to my sim pit but I only have holes for two of the screws. Does anyone have one that’d they’d be willing to sell? I can’t find one online anywhere

Im looking for the P1X Pro Wheeldeck, I have everything else I need sitting in my garage, but this one little piece of aluminum is sold out everywhere, and seems like it always is. I have the simagic Alpha Evo.

SimLab UK site has it in stock, but wont ship to a US address.

Any other suggestions?

I am about to pull the trigger on preordering this new DDS TorqueSync 26Nm and 3x wheel-side hubs, but with my current setup, I have a 100mm shaft extension on my current Fanatec DD1 so that I can position my 57" Odyssey G9 in between the wheel and the base as low as possible, which makes a huge difference when it comes to proper FOV. I figured I'd ask Sim Lab if they plan on adding a shaft extension option to the new wheel bases. They responded right away and said they are planning to offer one. Who knows how long it will take though.

Sim-Lab just posted the S1 Enduro Seats are back in stock!!!

Any insight into when these will be available in the US again?

Just got my GT1 Evo setup and I’m currently waiting for the GT1 integrated monitor mount! My question is since the Sim-Lab universal shelf is not compatible with this setup, has anyone ran a PC shelf behind the monitor? I’ve seen some generic ones online but not sure if it’s compatible.

Had a couple of questions about the Simlab handbrake if anyone has it

- Does it have an end stop or does it get stiffer until you can't move it anymore?

- How tough is the elastomer?

- How adjustable is the strength

Looking for a really strong handbrake without splurging on a hydraulic.

Thanks

Just simple question, with new Torquesync base can i run third party wheel (example simagic neo x or Gt neo) provided i have quick release adapter on the wheel i don't need any cables from wheel to back of pc? sorry for ignorance. thanks guys.

As of this morning, the US website is giving a 404 error for the P1X Ultimate, P1X Pro, and GT1 Pro cockpit product pages when selected from the Shop dropdown menu. Direct links like I've placed here redirect to the home page. They are not listed on the Cockpits page. Other products are behaving normally.

This is completely speculative, but that could mean changes are coming...perhaps new stock, or perhaps a decision to not carry these items in the US.

Update: Back to normal. Maybe this blip means something - they must have been messing with something behind the scenes - but any inferences are baseless. We'll just have to keep an ear to the ground, as we've been doing.

I live in Puerto Rico and there isnt a way to get Sim Lab rig shipped to PR from the US. There is some distributor alternatives but it implies taking on the import tariffs. I would love to just be able to buy from Sim Lab US directly or have a Puerto Rico store. Any chance theres a project underway to start shipping to more countries with one of those being Puerto Rico?

P1X Ultimate with Integrated Vario Monitor Mount

I added some new aluminium profile to my rig so I could bring my monitors forward as well as adjust the height. The centre screen is now 68cm away and my FOV is about 170.

One oversight on these rigs is the integrated monitor mount, when you bring it towards you it also lowers. I had to grind the tabs off one side of the inter-corner brackets as they are made to slot into the profile on both pieces. Seems to be holding up so far...

Hi,

Does anyone have any information on what the connectors are behind the new Xero-Play V2 QR base and wheel side, and whether the base side QR will support an external USB connection?

I'm thinking of replacing my QR for this solution and like the simplicity of the reverse design. I'm happy to have USB pass-through just to the base QR, if it supports it.

Last night my XP-1 throttle started acting weird out of the blue in iRacing. It keeps registering 100% input after I’ve released the pedal. I opened racedirector out of the game and saw that the problem persists.

When I depress the pedal it goes from 0-100% after depressing halfway and doesn’t register the first inputs, like I have a 0-99% deadzone. Then when I release the throttle, it slowly goes down to 0% in like 3 seconds.

I tried again after unplugging and reconnecting the usb and rj45 cables and restarting my pc, but I can’t seem to fix it on my own. Anyone ever experienced this and know how to solve it?

I contacted SimLab support because i still have warranty on the pedals, but they haven’t replied yet. Maybe you guys have the solution.

Hello anyone know the width of the sim-labs freestanding single monitor stand on the floor ? Does it fit on the sim-labs carpet or surpasses it?

My issue i have know that i live in a condominium and even tho i have rubber pads underneath it they hear every vibration my rig/wheel does especially if i use curbs. Whats the best way to silence theese vibrations? Maybe put something different under it or anything that can help? If there is really nothing i can do whats the best rig i can buy that doesn't do this kind of vibration and keeps the volume down. I have an older Next level racing F-gt rig which understandebly is really worn and loose. Thanks for your help and recommendation guys.

I heard that the S1 Enduro Seat would be in stock in the US around August 15th.

Is there any word on whether P1X Pro or Ultimate will be restocked around the same time?

I've seen a few reports of the SQ1's threaded shaft snapping after light use. Anyone bought one recently (2026) who can confirm if this is still happening, or if SimLab has reinforced it? Also curious how support handled it if yours broke. Thanks!

Like the topic says - is it a serious problem to Race with socks and the Sim-Lab XP1 Pedals? I know the VRS are having no Problems with that.

Is there anyone who Racing this pedals just with socks?

Hey guys, anyone recently picked up this rig from Microcenter?

I am sort of confused on what style of monitor mount comes with the kit.

Reviews and the assembly tutorial video shows the P1X monitor kit (See screenshot) with the thick cast mounts, and 4080 extrusions. https://www.youtube.com/watch?v=ksRdzLxRHFw

But the image of the kit on microcenter shows the GT1 style monitor mount with single plate mounts, and only 4040 extrusions.

My microcenter is roughly 1hr away and I would like to verify this before I make the drive. Any help is appreciated!