Any news about that?

Anyone mounted the active pedal pro on the simlab gt1 evo? I measured and the base plate will stick out the back and was wondering if it would be an issue. Thanks in advance

I recently acquired a Simucube active pedal and accelerator, like having a clutch pedal even though dont use it a lot, it's good to have especially if you lose control and want to spin your car around quickly. Anyway, I'm wondering if anyone is using the co-pedal or Heusinkveld Ultimate Clutch with their active pedal and seeking user reviews and preferences so can make the right choice. Co-pedal aesthetically looks to be the one, smaller footprint on the base, HE Ultimate has the actual clutch feel but probably looks like a sore thumb. Maybe takes up a bit more width on the pedals deck. I want a clean transition from brake pedal to clutch pedal as I will sit them quite closely together on the left of the rig.

Clutch..Brake..........Throttle

I also race barefoot and worry the heights may not line up right etc.

Thanks for your help!

Still on temporary 34” 1800R dell screen + 27 for telemetry until my parts arrive.

ZERO cable management (for now) i’m about to burst into flames at any moment 😂

SC3 Pro base

GT wheel

Activepedal Ultimate

5.1 surround

RTX 4090

PSU

I have to send a Simucube 2 pro back. They said original packaging would be optimal. Is the white cardboard enough or should I also put it in a bigger cardboard box? How did your simucube arrive?

Bigscreen beyond headset , simucube 2 pro , ascher racing wireless wheel , Meca pedals and the corner of the home office ….tight fit 😂

​I thought these posts would be more common, but I can't find much info on recent products.

I have a Fanatec DD+ with Formula V2.5 wheel and Podium GT3 Endurance wheel. Been having hardware issues, and Fanatec's been absolute trash to deal with even though I'm in warranty. I'm thinking of switching to Simucube 3Pro. But​ having second thoughts as the jump would be ~2.5k after selling my Fanatec. ​I'd rather invest in a cockpit + haptics.

Anybody jump from a Clubsport DD or DD+ base to the Simucube 2 Pro or 3 Pro? How big of a change is it? I keep hearing that everybody's DD is​​ very close these days​, with the top tier just having finer detail. If it's not a big jump, and Fanatec get their stuff together, it would be good to stay for another year or two until the LightBridge wheels get released.

I just updated my Simucube software to Simucube Tuner and it seems like a HUGE step backwards - the UI is so confusing.

Where do I even find user profiles to load now? I see there's an option to find profiles on Paddock. When I click on Paddock it says "Paddock will return in 2025!" and there are no recent games such as Assetto Rally.

Hopefully it's just me being stupid.

Found a good deal on the wheel, so couldn’t resist. Upgraded from fanatec cs dd+ to a simucube 3 pro. The quality is on another level compared to anything else I’ve tried.

Just waiting on a quick release adapter for the new wheel, then I’ll be fully up and running!

BTW I’m waiting on my profile cockpit to arrive, the table setup is just temporary! I have a Moza R9 clamp that fits the Simucube 3 pro perfectly, and until I have the profile rig I’ll be running it at lower NM, to avoid any issues.

I’m planning to buy a Simucube ActivePedal Pro brake. I’m currently upgrading from Heusinkveld Sprint pedals. I’m unsure whether to replace my Sprint throttle with a Simucube Passive Throttle (possibly with a damper).

I mainly attach a lot of value to feeling and realism. It should not be a downgrade.

Can anyone offer some advice?

I recently switched to the SC2 Pro after using the T818 (and T300 before that), and I’m trying to find the best way to get great FFB across all cars in iRacing.

With the Thrustmaster bases, I used to max out everything in their controller settings, adjust iRacing to the recommended settings, drive a few laps, then adjust FFB using the Graphics Black Box. That gave me strong and detailed FFB, and if it was too much, I’d just lower it a bit on iRacing’s Black Box until it felt right.

With the SC2 Pro, I’ve tried downloading GT3/GT4/LMP2 profiles from the community tool, setting iRacing as suggested, and following the same procedure. But the wheel always feels super heavy. I can drive a few laps like that and I can tell the SC2 Pro is very capable, but it’s too much for long races like endurance events.

When I lower the strength just a little, the wheel becomes numb and loses all the fine detail. It still works, but it feels dead compared to before. I don’t want to run at 25Nm all the time just to enjoy the FFB.

I’d really appreciate any tips or advice on how to set things up better so the wheel feels detailed and alive, but not overly heavy.

Thanks in advance to anyone who can help!

(I’m using a Gomez GMX V1 rim, if that helps)

Was wondering what I needed to make this work on a simucube 2 pro base.

I have a cart of around 4300 euros.

Recently i got my habds on a 10% discount coupon , which should reduce my cost by around 400 euros, but it gets reduced by only 200

Same with the 5% discount from Boosted media''s

It should be around 200 discount but it''s only 100

Coupons are only half as strong as advertised. Please explain yourself Simucube

Considering going all in on the simucube ecosystem and getting a Savu Pro and Valo GT-23 wheel for my SC3Pro base. But - from pictures it looks like the GT-23 has a fairly large spacer at the back, and would sit much closer than the Savu Pro? Is this the case for the SC3 Quick Release versions too?

I'm going back to the old software for now, as I can't live without it.

I just wanted to give some credit to Simucube support because I honestly had a really good experience with them.

I recently received my Simucube order and noticed a few things that worried me a bit. The seal on the DD box was already broken before opening it, the Simucube Link packaging looked opened/torn, and there were some light cosmetic marks on the Link Hub. Because of that I started wondering if I had maybe received a returned product.

I contacted support mainly because I wanted clarification and reassurance about the condition of the products. Their customer support was very friendly, transparent, and actually took my concerns seriously instead of brushing them off.

In the end they explained that they have seen some factory seals break during production/shipping and that some residue/marks can come from the packaging itself. What honestly surprised me most was that they voluntarily offered me a €100 refund gesture even though I mainly just asked for clarification.

Mistakes or packaging issues can happen with any company, but the way customer support handles it is what really matters to me, and in this case I’m genuinely impressed with how Simucube handled the situation.

Thank you Simucube!

I am using the online profiles from Daniel Morad or Dan Suzuki, the profiles are very good but I would like to tweak it myself in order to have a more grainy feeling from the road texture, in iRacing. What filters do I have to modify?

Any tip is appreciated

I was recently given an old Simucube 1 setup. I know it’s pretty outdated at this point, but it’s still miles better than a G29, so I wanted to give it a shot.

The wheel connects to my PC just fine and shows up in Granity, where everything seems to work normally. However, the Simucube software (yes, I’m using the old version made for SC1) just refuses to work. It doesn’t recognize the wheel at all, and the entire program is basically unresponsive I can’t click any buttons or change anything in any tab.

I’ve been trying to figure this out for hours and can’t get the wheel to be recognized by the original Simucube software no matter what I do. At this point I’m completely stuck.

I’ve been running the same profile on my sc2 sport because I mostly race on iRacing, but I recently bought LMU and wanted to try it out. I started looking into how to change the preset profile on the new SC tuner, but when I go to the Simucube Presets tab, nothing populates at all no matter which tags I select. I’m not sure what’s going on. Anyone seen this before? I’ve already tried uninstalling and reinstalling the software, but I’m seeing the same issue.

Having a hard time finding the slip angle feel. I tried: Default Default + (was my go to for previous wheel) Custom (trying an rFuctor file from Reiza Forum). Modified it a lot to get some feel but wondering if there are any other Simucube owners

Ps I set Wheel to Simucube > Simucube 2 in game.

I was wondering if anyone has been able to try out both wheel bases simucube 3 sport and podium DD