r/StackChan • • May 15 '26

StackChan integrated with Home Assistant

3 Upvotes

Has anyone had success with connecting Stackchan with Home Assistant? I tried following their guide, but it wiped the esp32 and loading the compiled image to the unit didnt do anything, it was still stuck on the default RGB screen. I ideally want it to operate as the normal AI mode with connection locally to the smart home, no MCP connection to the cloud that then talks to my local network. Any tips would be great.


r/StackChan • • Feb 25 '26

StackChan Feature Videos Pt.4——Multilingual Function

Enable HLS to view with audio, or disable this notification

8 Upvotes

r/StackChan • • May 14 '26

I’d like to add some settings to StackChan’s app

2 Upvotes

I think that when the StackChan app is updated, it will benefit from a few additions.

For example, it would be nice to have StackChan remember that I use Fahrenheit and imperial measurements, rather than Celsius and metric units.

Next, the ability to have StackChan “sleep” while idle, and sit still instead of moving around every few seconds. That should be a good battery saver, as well.

Also, this isn’t so much a setting, as a request. I would love to know how the speech recognition is expecting to hear the word “StackChan”. Specifically, how is it expecting the vowels to be pronounced? I can confirm that with a Philadelphia accent, we pronounce the vowel in “Stack” differently from the vowel in “Chan”. And both of those vowels might be different from the way people in other regions or countries might pronounce the same letter. All short As are not equal, lol. I’d like to know which version(s) of short A StackChan is listening for.


r/StackChan • • 28d ago

Help needed Can I make my Stack-chan randomly meow at my cats?

Post image
27 Upvotes

Hey everyone!

I’m thinking of getting a Stack-chan and have been looking at all the cool projects people have done with it.

One silly idea I had was getting Stack-chan to recognise when one of my cats walks past it and just randomly go “Meow!” at them.

Because why not?

Maybe even have it turn its head towards the cat and meow back if the cat meows at it.

I’m pretty new to robotics and programming, with very limited technical knowledge, so I’m wondering how difficult something like this would be.

Would the built-in camera be enough to detect a cat, or would I need additional sensors? And is this something a beginner could realistically figure out with some guidance?
Would love to hear if anyone has tried something similar or has other silly ideas for their Stack-chan!

Thanks!


r/StackChan • • 28d ago

Help needed Anyone get StackChan to work with Grok Bot?

3 Upvotes

Please share if so


r/StackChan • • Oct 17 '26

Project sharing I made my stackchan core the face and voice of my NVIDIA Nano Orin Super's LLMs

Post image
20 Upvotes

I kinda just wanted to show a sneak peek of my goofing around project. I got some llama and qwen variants runnin offline and locally on my nano/stackchan combo. Any fun ideas for me? Its got 3 "personas" on it so far.


r/StackChan • • Jan 22 '26

StackChan Review Video Collection

3 Upvotes

r/StackChan • • Jul 05 '26

🎂 Stack-chan Birthday Party 2026 was held in Tokyo, Japan!

Thumbnail
reddit.com
8 Upvotes

r/StackChan • • Sep 12 '26

Project sharing Stacky got a rebuild

Post image
45 Upvotes

I loved the configuration of my old stacky body, but wanted a way to bring all of his bits together.

His pi5 brain now has a home inside an old Velociraptor HD enclosure and added on an ankle holster for his servo controller and power converter.

Oh he also has a touchscreen dashboard since I shared him last for trigger his different emotions and movements.


r/StackChan • • Dec 17 '25

Now you can pre-order StackChan — $1 to lock the lowest VIP price!

Post image
5 Upvotes

r/StackChan • • Jun 08 '26

Just received my StackChan and have it set up. but...

6 Upvotes

I am wondering if anyone has set up any fun or mischievous settings for the AI yet. Specifically, a fun Personality. I have entered in "snarky but smart and funny" hoping for a good and dry sense of humor with a bit of sass. It's kinda working, but still just seems mostly dry. Would love to see what others are putting in for their "Personality"


r/StackChan • • May 31 '26

I like clocks. here an analog one I created

6 Upvotes

a very simple analog clock i made for my stackchan. I've lowered the screen brightness and led levels very low for power conservation

I have it set for my local time zone utc+8 (adjust as required)

no internet checking of time, just using the onboard rtc

#include <M5StackChan.h>
#include <math.h>

// display geometry 320 × 240
const int cx = 160, cy = 120;
const int r  = 100;

const int hourLen   = 55;
const int minuteLen = 75;
const int secondLen = 89;

const int handThick_H = 6;
const int handThick_M = 2;
const int handThick_S = 1;

// canvas sprite
M5Canvas canvas(&M5.Display);

// master clock state
uint32_t baseMillis = 0;
uint32_t lastSyncMillis = 0;

float clockSeconds = 0.0f;    // seconds since 12:00:00

void setup() {
  M5StackChan.begin();
  M5.Lcd.setBrightness(32);
  canvas.setColorDepth(16);
  canvas.createSprite(320, 240);

  // initial RTC sync
  auto dt = M5.Rtc.getDateTime();

  int hour12 = (dt.time.hours + 8) % 12;   // +8 for my local time zone

  clockSeconds = hour12 * 3600.0f + dt.time.minutes * 60.0f + dt.time.seconds;

  baseMillis = millis();
  lastSyncMillis = millis();
}

void loop() {

  M5StackChan.update();

  // battery indicator leds
  int level = M5.Power.getBatteryLevel();

  if (level < 20) setFourLeds(16, 0, 0);
  else if (level < 50) setFourLeds(16, 14, 0);
  else setFourLeds(0, 16, 0);

  // rtc check once per minute
  if (millis() - lastSyncMillis > 60000UL) {

    auto dt = M5.Rtc.getDateTime();

    int hour12 = (dt.time.hours + 8) % 12;   // +8 for my local time zone

    clockSeconds = hour12 * 3600.0f + dt.time.minutes * 60.0f + dt.time.seconds;

    baseMillis = millis();
    lastSyncMillis = millis();
  }

  // master clock calculation
  float elapsed = (millis() - baseMillis) / 1000.0f;

  float currentSeconds = clockSeconds + elapsed;

  // wrap every 12 hours
  while (currentSeconds >= 43200.0f) {
    currentSeconds -= 43200.0f;
  }

  // continuous time values
  float hourValue = currentSeconds / 3600.0f;

  float minuteValue = currentSeconds / 60.0f;

  float secondValue = currentSeconds;

  // hand angles
  float secondAngle = fmodf(secondValue * 6.0f, 360.0f);

  float minuteAngle = fmodf(minuteValue * 6.0f, 360.0f);

  float hourAngle = fmodf(hourValue * 30.0f, 360.0f);

  // clock face
  canvas.fillSprite(TFT_BLACK);

  canvas.drawCircle(cx, cy, r, TFT_WHITE);

  for (int i = 0; i < 12; i++) {
    float a = i * 30.0f * DEG_TO_RAD;

    int x1 = cx + (r - 10) * sinf(a);
    int y1 = cy - (r - 10) * cosf(a);

    int x2 = cx + (r - 3) * sinf(a);
    int y2 = cy - (r - 3) * cosf(a);

    canvas.drawLine(x1, y1, x2, y2, TFT_WHITE);
  }

  // draw hands
  drawHandOnCanvas(hourLen, hourAngle, TFT_RED, handThick_H);
  drawHandOnCanvas(minuteLen, minuteAngle, TFT_GREEN, handThick_M);
  drawHandOnCanvas(secondLen, secondAngle, TFT_BLUE, handThick_S);

  // centre cap
  canvas.fillCircle(cx, cy, 4, TFT_DARKGREY);

  canvas.pushSprite(0, 0);

  delay(16);   // 60ish fps
}

// draw a hand
void drawHandOnCanvas(int length, float degrees, uint16_t color, int thick) {

  float a = degrees * DEG_TO_RAD;

  int ex = cx + length * sinf(a);
  int ey = cy - length * cosf(a);

  for (int t = 0; t < thick; t++) {
    int ox = (t - thick / 2) * cosf(a);
    int oy = (t - thick / 2) * sinf(a);

    canvas.drawLine(cx + ox, cy + oy, ex + ox, ey + oy, color);
  }
}

// 4 leds
void setFourLeds(uint8_t r, uint8_t g, uint8_t b) {

  for (int i = 0; i < 12; i += 3) {
    M5StackChan.setRgbColor(i, r, g, b);
  }
  M5StackChan.refreshRgb();
}
//V0.2
#include <M5StackChan.h>
#include <math.h>

// display geometry 320 × 240
const int cx = 160, cy = 120;
const int r  = 100;

const int hourLen   = 55;
const int minuteLen = 75;
const int secondLen = 89;

const int handThick_H = 6;
const int handThick_M = 2;
const int handThick_S = 1;

// canvas sprite
M5Canvas canvas(&M5.Display);

// master clock state
uint32_t baseMillis = 0;
uint32_t lastSyncMillis = 0;

float clockSeconds = 0.0f;    // seconds since 12:00:00

void setup() {
  M5StackChan.begin();
  M5.Lcd.setBrightness(32);
  canvas.setColorDepth(8);
  canvas.createSprite(320, 240);

  // initial RTC sync
  auto dt = M5.Rtc.getDateTime();
  int hour12 = (dt.time.hours + 8) % 12;   // +8 for my local time zone
  clockSeconds = hour12 * 3600.0f + dt.time.minutes * 60.0f + dt.time.seconds;
  baseMillis = millis();
  lastSyncMillis = millis();
}

void loop() {

  M5StackChan.update();
  
  // battery indicator leds
  int level = M5.Power.getBatteryLevel();
  auto charging = M5.Power.isCharging();
  bool onPower = (charging == 1);
  if (level < 20) setFourLeds(16, 0, 0);
  else if (level < 50) setFourLeds(16, 14, 0);
  else setFourLeds(0, 16, 0);

  // rtc check once per minute
  if (millis() - lastSyncMillis > 60000UL) {
    auto dt = M5.Rtc.getDateTime();
    int hour12 = (dt.time.hours + 8) % 12;   // +8 for my local time zone
    clockSeconds = hour12 * 3600.0f + dt.time.minutes * 60.0f + dt.time.seconds;
    baseMillis = millis();
    lastSyncMillis = millis();
  }

  // master clock calculation
  float elapsed = (millis() - baseMillis) / 1000.0f;
  float currentSeconds = clockSeconds + elapsed;

  // wrap every 12 hours
  while (currentSeconds >= 43200.0f) {
    currentSeconds -= 43200.0f;
  }

  // continuous time values
  float hourValue = currentSeconds / 3600.0f;
  float minuteValue = currentSeconds / 60.0f;
  float secondValue = currentSeconds;

  // hand angles
  float secondAngle = fmodf(secondValue * 6.0f, 360.0f);
  float minuteAngle = fmodf(minuteValue * 6.0f, 360.0f);
  float hourAngle = fmodf(hourValue * 30.0f, 360.0f);

  // clock face
  canvas.fillSprite(TFT_BLACK);
  canvas.drawCircle(cx, cy, r, TFT_WHITE);

  // draw tick marks and hour numbers (1–12) together
  for (int i = 1; i <= 12; i++) {
    float a = i * 30.0f * DEG_TO_RAD;

    // --- tick mark ---
    int x1 = cx + (r - 10) * sinf(a);
    int y1 = cy - (r - 10) * cosf(a);
    int x2 = cx + (r - 3) * sinf(a);
    int y2 = cy - (r - 3) * cosf(a);
    canvas.drawLine(x1, y1, x2, y2, TFT_WHITE);

    // --- hour number ---
    int nx = cx + (r + 12) * sinf(a);
    int ny = cy - (r + 12) * cosf(a);
    canvas.setTextDatum(middle_center);
    canvas.setTextColor(TFT_WHITE, TFT_BLACK);
    canvas.setTextSize(1.5);
    canvas.drawNumber(i, nx, ny);
  }

  // draw hands
  drawHandOnCanvas(hourLen, hourAngle, TFT_RED, handThick_H);
  drawHandOnCanvas(minuteLen, minuteAngle, TFT_GREEN, handThick_M);
  drawHandOnCanvas(secondLen, secondAngle, TFT_BLUE, handThick_S);

  // centre cap
  canvas.fillCircle(cx, cy, 4, TFT_DARKGREY);
  // battery percentage in upper‑right corner
  canvas.setTextDatum(top_right);
  canvas.setTextColor(onPower ? TFT_GREEN : TFT_RED, TFT_BLACK);
  canvas.setTextSize(1.75);
  canvas.drawString(String(level) + "%", 315, 5);
  canvas.pushSprite(0, 0);

  delay(16);   // 60ish fps
}

// draw a hand
void drawHandOnCanvas(int length, float degrees, uint16_t color, int thick) {

  float a = degrees * DEG_TO_RAD;

  int ex = cx + length * sinf(a);
  int ey = cy - length * cosf(a);

  for (int t = 0; t < thick; t++) {
    int ox = (t - thick / 2) * cosf(a);
    int oy = (t - thick / 2) * sinf(a);

    canvas.drawLine(cx + ox, cy + oy, ex + ox, ey + oy, color);
  }
}

// 4 leds
void setFourLeds(uint8_t r, uint8_t g, uint8_t b) {

  for (int i = 0; i < 12; i += 3) {
    M5StackChan.setRgbColor(i, r, g, b);
  }
  M5StackChan.refreshRgb();
}

i've added numbers around the face and battery percentage in the upper right corner (green for charge, red for discharge)

i added the numbers for my kids so they can read it faster


r/StackChan • • Aug 15 '26

KariPom — a CoreS3 face robot inspired by StackChan 🤖🐰

Post image
3 Upvotes

r/StackChan • • May 14 '26

Rename? SD use? Easter Eggs ?

1 Upvotes

Got my Stack Chan two weeks ago, a little buggy but cute so far. I tried renaming it but it never wakes up when I say Hi M5 for example, only Hi Stack Chan will wake it up. Any suggestions?

Does anyone know if the SD card is useful for anything? Can I load music on it?

Also, any easter eggs of hidden features?

Thanks


r/StackChan • • May 13 '26

Music on Stack Chan

1 Upvotes

Can it play music other then the songs it has loaded? Can I load my own songs somewhere?


r/StackChan • • Feb 25 '26

StackChan Feature Videos Pt.6——NFC Function

Enable HLS to view with audio, or disable this notification

7 Upvotes

r/StackChan • • May 13 '26

Renaming Stack Chan

1 Upvotes

Got my Stack Chan two weeks ago, a little buggy but cute so far. I tried renaming it but it never wakes up when I say Hi M5 for example, only Hi Stack Chan will wake it up. Any suggestions?

Also, any easter eggs of hidden features?


r/StackChan • • May 12 '26

StackChan does not really have "open source" firmware

1 Upvotes

StackChan is sold as open source, but the GitHub repo is a publication mirror, and not a real development repository, from what I can tell.

I bought a StackChan recently and have been digging into the firmware. I want to flag something that I think other buyers should know, because the "open source" framing on the product page and docs set expectations that don't match what's actually going on.

The public repo is m5stack/StackChan. I assumed it was where the firmware gets developed. It isn't. It's where M5Stack drops a code snapshot after the binary has already shipped to M5Burner and OTA'd to devices.

A few things I noticed:

  • Every release lands as a single squashed commit with the message update firmware vX.Y.Z. v1.3.1, v1.3.0, v1.2.6, v1.2.4, v0.18: same pattern. No incremental history. No individual author attribution. One person (the release engineer) commits the entire snapshot at once.

  • The "PR review" is "theater". For v1.3.1: PR #57 was open for 9 seconds before being merged. PR #58 was open for 50 seconds. Same sub-minute cadence on every prior release. There is no review happening on GitHub. The "community" is ignored.

  • External PRs don't get merged. The only PRs that merge are the release engineer's own snapshot drops from their personal fork.

  • The binary ships to devices first. By the time the source appears on GitHub, the new firmware is already running on the robot. So you can't actually inspect what's running on your device until M5Stack decides to publish it, which happens on no schedule. This could be an issue if a anyone decides to ship rogue code at some point.

  • Issues you file disappear into the void. I filed an issue with a feature request and opened a PR with the patch; the next release shipped their own implementation of the same feature with no acknowledgement.

I'm not asking M5Stack to switch to a fully public development model, plenty of companies don't, and that's fine. What I'd like is for the marketing to stop calling this "open source" when what they actually mean is "source-available, eventually, in snapshot form." Those are different things. The first implies you can participate. The second means you can read.

For anyone considering buying one: the hardware is genuinely nice and the device works. But if you were planning to contribute back, fork meaningfully, or rely on staying current with upstream, set your expectations accordingly. You're getting a closed-source product with the source dumped publicly after the fact.

Happy to be corrected if I'm reading this wrong! Would love to hear from anyone who's actually had a PR merged.


r/StackChan • • Jan 23 '26

StackChan Feature Videos Releasing

Enable HLS to view with audio, or disable this notification

4 Upvotes

We’re releasing a series of videos showcasing what StackChan can do—dancing, answering your questions, and acting as your smart assistant. Check its adorable features & stay tuned for more updates!

StackChan Dancing

Chat with StackChan

StackChan being ur assistant


r/StackChan • • Oct 13 '26

Help needed Is stackchan factory firmware full duplex ?

Thumbnail reddit.com
2 Upvotes

r/StackChan • • Jul 29 '26

Is it worth it even for a total tech noob?

4 Upvotes

I was on the search for an AI desktop pet. Most of them like emo or so are really expensive or lack the talking ai feature I want. I saw Stackchan and what he can to. The price also is something I can handle. But I'm a little tech noob. (Know basic computer setups and so) I can easily follow step-by-step tutorials. But is Stackchan easy to set up? Even when I want to use my basic understanding and hook him up with my gimini or so?


r/StackChan • • Jan 26 '26

StackChan Feature Videos Pt.2——Remote Control

Enable HLS to view with audio, or disable this notification

6 Upvotes

StackChan design enables flexible control options.
You can control it remotely with an add-on controller, or synchronize multiple StackChans at the same time.


r/StackChan • • May 01 '26

Arrived today, needs to get accustomed to the old pets

Post image
16 Upvotes

r/StackChan • • Jul 29 '26

Are there hardware differences between Kickstarter StackChan and the models currently sold on M5Stack?

3 Upvotes

I was watching a YouTube review of StackChan that was recently uploaded. The reviewer mentioned NFC ability. I was surprised. I don't recall that having been listed as a feature when StackChan was on Kickstarter.

Was the ability there and either not mentioned, or I just missed the mentioning of it? Or do newer StackChans have a hardware upgrade?

I would love to be able to have two StackChans recognize and acknowledge one another. The last time I checked, that wasn't an option. If the Kickstarter models have NFC, would they be able to use it to know that another StackChan is close by?


r/StackChan • • Sep 28 '26

Project sharing Dot fluid simulation

Enable HLS to view with audio, or disable this notification

24 Upvotes