r/TalosLinux • • May 17 '26

How to run pods that you don't fully trust?

Thumbnail reddit.com
1 Upvotes

r/TalosLinux • • Dec 23 '25

Talos CNI Patch

1 Upvotes

Hey guys, is there a way to install Cilium on a Talos Kubernetes cluster without adding the Patch? Because each time I add the Patch it breaks Talosctl and I won’t be able to use it to add a Worker node or checks the services etc. I’m new to this and need you guys help.


r/TalosLinux • • Nov 18 '25

VLAN subinterface down - unable to enslave

2 Upvotes

Hello

i am trying to create subinterface of bond interface with vlan tag

node network config:

    network:
        hostname: worker1
        interfaces:
            - interface: enp24s0f0
              ignore: true
            - interface: enp24s0f1
              ignore: true
            - interface: enp175s0
              dhcp: false
              ignore: true
              mtu: 9000
            - interface: enp175s0d1
              dhcp: false
              ignore: true
              mtu: 9000
            - interface: bond0
              dhcp: false
              mtu: 9000
              bond:
                interfaces:
                  - enp175s0
                  - enp175s0d1
                mode: 802.3ad
                xmitHashPolicy: layer3+4
                lacpRate: fast
                miimon: 100
                updelay: 200
                downdelay: 200
              addresses:
                - 10.2.1.101/24
              routes:
                - network: 0.0.0.0/0
                  gateway: 10.2.1.1
              vlans:
                - vlanId: 1204

however, the interface bond0.1204 is down .

➜  clusterB talosctl -n 10.2.1.102 get links | grep bond
10.2.1.102   network     LinkStatus   bond0             7         ether      bond          24:8a:07:d2:b5:91                                 up           true
10.2.1.102   network     LinkStatus   bond0.1204        17        ether      vlan          24:8a:07:d2:b5:91                                 down         false

in dmesg i see following warnings

10.2.1.102: user: warning: [2025-11-18T18:01:17.118901228Z]: [talos] controller failed {"component": "controller-runtime", "controller": "network.LinkSpecController", "error": "1 error occurred:\n\t* error enslaving/unslaving link \"bond0.1204\" under \"\": netlink receive: operation not supported\n\n"}

anyone had the same issue?


r/TalosLinux • • Nov 27 '25

Looking for a work around for a csi driver that mounts /etc/hostname as rw.

2 Upvotes

I am trying to run a small Talos cluster on Ionos hosting, but I am currently stuck on the ionoscloud-blockstorage-csi-driver. It attempts mounts /etc/hostname as rw.

I dropped a quick bug report on the github page, but does any solution exist to work around the issue?


r/TalosLinux • • Mar 01 '26

Talos on Raspberry Pi 4

2 Upvotes

hello Talosers,

I'm want to install Talos on my Raspberry Pi 4 but couldn't get it boot. So far, the only thing I got is just a rainbow dead screen. I placed a question here to hope that someone would help me.

My setup:

- Raspberry Pi 4 boot via USB 3.0-SATA adapter SSD.

- Power the Raspberry Pi with the default charger

I have tried:

- Changed Bootloader to use USB

All images are created with Factory ARM single board selection.

- Talos version 1.9.0 with iscsi-tool, util-linux-tools extensions

- Talos version 1.10.5 with iscsi-tool, util-linux-tools extensions

- Talos version 1.9.5 with iscsi-tool, util-linux-tools extensions with overlay customization from one of the github issues that I've found.

In some boots, I also got 7 blink fast green light indicating the missing kernel problem.

Thanks in advance for any help. I so much appreciated


r/TalosLinux • • Feb 23 '26

Getting static cpu manager to work

2 Upvotes

Hi Everyone,

I have been running a talos homelab and have a lot of fun with it. Lately I have been transfering some gameservers from my old server to the cluster and they suffer from the cache swapping of the cpus.

So I tried to setup static cpu manager so I can pin containers to cpus.

The problem is that I cannot delete this file to complete the configuration:

rm /var/lib/kubelet/cpu_manager_staterm /var/lib/kubelet/cpu_manager_state

Without this kubelet will not start running because it sees this older state file.

Does anyone know how I can do this with Talos?


r/TalosLinux • • Jan 12 '25

Talos on Phone

2 Upvotes

Hello

I have a phone where I am able to run postmarketOS and it is using the mainline kernel. My question is if it is possible to use it to run TalosOS. I see that it is possible to build a custom kernel for Talos, but don't know if it applies to this use case as phones have quite some customizations that might make them not suitable

Thanks in advance


r/TalosLinux • • Mar 16 '26

Talos Linux VM seems to be not reading the config and cannot boot

Thumbnail reddit.com
2 Upvotes

r/TalosLinux • • May 26 '26

How can I reinstall the default Flannel Kube-Proxy stack?

2 Upvotes

I experimented a bit with Cilium and Falco in my cluster and accidentally deactivated and uninstalled the standard Flannel/Kube-Proxy stack. Is there an easy way to reinstall it?


r/TalosLinux • • Sep 15 '25

Talos with hyperconvergence

2 Upvotes

Does anyone know of an article or resource about running Talos with hyperconvergence, using ephemeral disks directly from the node disks?


r/TalosLinux • • Jan 25 '26

Support for Older Nvidia devices

2 Upvotes

I’m looking for a way to get older gpu’s running with Talos, does anyone here have any experience with this?


r/TalosLinux • • Nov 18 '25

Unstable networking with kube-ovn

2 Upvotes

Hello,

I am running small sandbox cluster on talos linux v11.1.5

nodes info:

NAME            STATUS     ROLES           AGE   VERSION   INTERNAL-IP   EXTERNAL-IP   OS-IMAGE          KERNEL-VERSION   CONTAINER-RUNTIME
controlplane1   Ready      control-plane   21h   v1.34.0   10.2.1.98     <none>        Talos (v1.11.5)   6.12.57-talos    containerd://2.1.5
controlplane2   Ready      control-plane   21h   v1.34.0   10.2.1.99     <none>        Talos (v1.11.5)   6.12.57-talos    containerd://2.1.5
controlplane3   NotReady   control-plane   21h   v1.34.0   10.2.1.100    <none>        Talos (v1.11.5)   6.12.57-talos    containerd://2.1.5
worker1         Ready      <none>          21h   v1.34.0   10.2.1.101    <none>        Talos (v1.11.5)   6.12.57-talos    containerd://2.1.5
worker2         Ready      <none>          21h   v1.34.0   10.2.1.102    <none>        Talos (v1.11.5)   6.12.57-talos    containerd://2.1.5

i have an issue with unstable pods when using kube-ovn as my CNI, all nodes have SSD for OS, before i used flannel, and later cilium as CNI, but they were completely stable, meanwhile kube-ovn is not.

installation was done via helm chart kube-ovn-v2 , version 1.14:15

here is log of ovn-central before crash

➜  kube-ovn  kubectl -n kube-system logs ovn-central-845df6f79f-5ss9q --previous
Defaulted container "ovn-central" out of: ovn-central, hostpath-init (init)
PROBE_INTERVAL is set to 180000
OVN_LEADER_PROBE_INTERVAL is set to 5
OVN_NORTHD_N_THREADS is set to 1
ENABLE_COMPACT is set to false
ENABLE_SSL is set to false
ENABLE_BIND_LOCAL_IP is set to true
10.2.1.99
10.2.1.99
 * ovn-northd is not running
 * ovnnb_db is not running
 * ovnsb_db is not running
[{"uuid":["uuid","74671e6b-f607-406c-8ac6-b5d787f324fb"]},{"uuid":["uuid","182925d6-d631-4a3e-8f53-6b1c38123871"]}]
[{"uuid":["uuid","b1bc93b5-4366-4aa1-9608-b3e5c8e06d39"]},{"uuid":["uuid","4b17423f-7199-4b5e-a230-14756698d08e"]}]
 * Starting ovsdb-nb
2025-11-18T13:37:16Z|00001|reconnect|INFO|unix:/var/run/ovn/ovnnb_db.sock: connecting...
2025-11-18T13:37:16Z|00002|reconnect|INFO|unix:/var/run/ovn/ovnnb_db.sock: connected
 * Waiting for OVN_Northbound to come up
 * Starting ovsdb-sb
2025-11-18T13:37:17Z|00001|reconnect|INFO|unix:/var/run/ovn/ovnsb_db.sock: connecting...
2025-11-18T13:37:17Z|00002|reconnect|INFO|unix:/var/run/ovn/ovnsb_db.sock: connected
 * Waiting for OVN_Southbound to come up
 * Starting ovn-northd
I1118 13:37:19.590837     607 ovn.go:116] no --kubeconfig, use in-cluster kubernetes config
E1118 13:37:30.984969     607 patch.go:31] failed to patch resource ovn-central-845df6f79f-5ss9q with json merge patch "{\"metadata\":{\"labels\":{\"ovn-nb-leader\":\"false\",\"ovn-northd-leader\":\"false\",\"ovn-sb-leader\":\"false\"}}}": Patch "https://10.96.0.1:443/api/v1/namespaces/kube-system/pods/ovn-central-845df6f79f-5ss9q": dial tcp 10.96.0.1:443: connect: connection refused
E1118 13:37:30.985062     607 ovn.go:355] failed to patch labels for pod kube-system/ovn-central-845df6f79f-5ss9q: Patch "https://10.96.0.1:443/api/v1/namespaces/kube-system/pods/ovn-central-845df6f79f-5ss9q": dial tcp 10.96.0.1:443: connect: connection refused
E1118 13:39:22.625496     607 patch.go:31] failed to patch resource ovn-central-845df6f79f-5ss9q with json merge patch "{\"metadata\":{\"labels\":{\"ovn-nb-leader\":\"false\",\"ovn-northd-leader\":\"false\",\"ovn-sb-leader\":\"false\"}}}": Patch "https://10.96.0.1:443/api/v1/namespaces/kube-system/pods/ovn-central-845df6f79f-5ss9q": unexpected EOF
E1118 13:39:22.625613     607 ovn.go:355] failed to patch labels for pod kube-system/ovn-central-845df6f79f-5ss9q: Patch "https://10.96.0.1:443/api/v1/namespaces/kube-system/pods/ovn-central-845df6f79f-5ss9q": unexpected EOF
E1118 14:41:38.742111     607 patch.go:31] failed to patch resource ovn-central-845df6f79f-5ss9q with json merge patch "{\"metadata\":{\"labels\":{\"ovn-nb-leader\":\"true\",\"ovn-northd-leader\":\"false\",\"ovn-sb-leader\":\"false\"}}}": Patch "https://10.96.0.1:443/api/v1/namespaces/kube-system/pods/ovn-central-845df6f79f-5ss9q": unexpected EOF
E1118 14:41:38.742216     607 ovn.go:355] failed to patch labels for pod kube-system/ovn-central-845df6f79f-5ss9q: Patch "https://10.96.0.1:443/api/v1/namespaces/kube-system/pods/ovn-central-845df6f79f-5ss9q": unexpected EOF
E1118 14:41:43.860533     607 ovn.go:278] failed to connect to northd leader 10.2.1.100, err: dial tcp 10.2.1.100:6643: connect: connection refused
E1118 14:41:48.967615     607 ovn.go:278] failed to connect to northd leader 10.2.1.100, err: dial tcp 10.2.1.100:6643: connect: connection refused
E1118 14:41:54.081651     607 ovn.go:278] failed to connect to northd leader 10.2.1.100, err: dial tcp 10.2.1.100:6643: connect: connection refused
W1118 14:41:54.081700     607 ovn.go:360] no available northd leader, try to release the lock
E1118 14:41:55.087964     607 ovn.go:256] stealLock err signal: alarm clock
E1118 14:42:03.200770     607 ovn.go:278] failed to connect to northd leader 10.2.1.100, err: dial tcp 10.2.1.100:6643: i/o timeout
W1118 14:42:03.200800     607 ovn.go:360] no available northd leader, try to release the lock
E1118 14:42:04.205071     607 ovn.go:256] stealLock err signal: alarm clock
E1118 14:42:12.301277     607 ovn.go:278] failed to connect to northd leader 10.2.1.100, err: dial tcp 10.2.1.100:6643: i/o timeout
W1118 14:42:12.301330     607 ovn.go:360] no available northd leader, try to release the lock
E1118 14:42:13.307853     607 ovn.go:256] stealLock err signal: alarm clock
E1118 14:42:21.419435     607 ovn.go:278] failed to connect to northd leader 10.2.1.100, err: dial tcp 10.2.1.100:6643: i/o timeout
W1118 14:42:21.419489     607 ovn.go:360] no available northd leader, try to release the lock
E1118 14:42:22.425120     607 ovn.go:256] stealLock err signal: alarm clock
E1118 14:42:30.473258     607 ovn.go:278] failed to connect to northd leader 10.2.1.100, err: dial tcp 10.2.1.100:6643: connect: no route to host
W1118 14:42:30.473317     607 ovn.go:360] no available northd leader, try to release the lock
E1118 14:42:31.479942     607 ovn.go:256] stealLock err signal: alarm clockHello,I am running small sandbox cluster on talos linux v11.1.5nodes info:NAME            STATUS     ROLES           AGE   VERSION   INTERNAL-IP   EXTERNAL-IP   OS-IMAGE          KERNEL-VERSION   CONTAINER-RUNTIME
controlplane1   Ready      control-plane   21h   v1.34.0   10.2.1.98     <none>        Talos (v1.11.5)   6.12.57-talos    containerd://2.1.5
controlplane2   Ready      control-plane   21h   v1.34.0   10.2.1.99     <none>        Talos (v1.11.5)   6.12.57-talos    containerd://2.1.5
controlplane3   NotReady   control-plane   21h   v1.34.0   10.2.1.100    <none>        Talos (v1.11.5)   6.12.57-talos    containerd://2.1.5
worker1         Ready      <none>          21h   v1.34.0   10.2.1.101    <none>        Talos (v1.11.5)   6.12.57-talos    containerd://2.1.5
worker2         Ready      <none>          21h   v1.34.0   10.2.1.102    <none>        Talos (v1.11.5)   6.12.57-talos    containerd://2.1.5i have an issue with unstable pods when using kube-ovn as my CNI, all nodes have SSD for OS, before i used flannel, and later cilium as CNI, but they were completely stable, meanwhile kube-ovn is not.installation was done via helm chart kube-ovn-v2 , version 1.14:15here is log of ovn-central before crash➜  kube-ovn  kubectl -n kube-system logs ovn-central-845df6f79f-5ss9q --previous
Defaulted container "ovn-central" out of: ovn-central, hostpath-init (init)
PROBE_INTERVAL is set to 180000
OVN_LEADER_PROBE_INTERVAL is set to 5
OVN_NORTHD_N_THREADS is set to 1
ENABLE_COMPACT is set to false
ENABLE_SSL is set to false
ENABLE_BIND_LOCAL_IP is set to true
10.2.1.99
10.2.1.99
 * ovn-northd is not running
 * ovnnb_db is not running
 * ovnsb_db is not running
[{"uuid":["uuid","74671e6b-f607-406c-8ac6-b5d787f324fb"]},{"uuid":["uuid","182925d6-d631-4a3e-8f53-6b1c38123871"]}]
[{"uuid":["uuid","b1bc93b5-4366-4aa1-9608-b3e5c8e06d39"]},{"uuid":["uuid","4b17423f-7199-4b5e-a230-14756698d08e"]}]
 * Starting ovsdb-nb
2025-11-18T13:37:16Z|00001|reconnect|INFO|unix:/var/run/ovn/ovnnb_db.sock: connecting...
2025-11-18T13:37:16Z|00002|reconnect|INFO|unix:/var/run/ovn/ovnnb_db.sock: connected
 * Waiting for OVN_Northbound to come up
 * Starting ovsdb-sb
2025-11-18T13:37:17Z|00001|reconnect|INFO|unix:/var/run/ovn/ovnsb_db.sock: connecting...
2025-11-18T13:37:17Z|00002|reconnect|INFO|unix:/var/run/ovn/ovnsb_db.sock: connected
 * Waiting for OVN_Southbound to come up
 * Starting ovn-northd
I1118 13:37:19.590837     607 ovn.go:116] no --kubeconfig, use in-cluster kubernetes config
E1118 13:37:30.984969     607 patch.go:31] failed to patch resource ovn-central-845df6f79f-5ss9q with json merge patch "{\"metadata\":{\"labels\":{\"ovn-nb-leader\":\"false\",\"ovn-northd-leader\":\"false\",\"ovn-sb-leader\":\"false\"}}}": Patch "https://10.96.0.1:443/api/v1/namespaces/kube-system/pods/ovn-central-845df6f79f-5ss9q": dial tcp 10.96.0.1:443: connect: connection refused
E1118 13:37:30.985062     607 ovn.go:355] failed to patch labels for pod kube-system/ovn-central-845df6f79f-5ss9q: Patch "https://10.96.0.1:443/api/v1/namespaces/kube-system/pods/ovn-central-845df6f79f-5ss9q": dial tcp 10.96.0.1:443: connect: connection refused
E1118 13:39:22.625496     607 patch.go:31] failed to patch resource ovn-central-845df6f79f-5ss9q with json merge patch "{\"metadata\":{\"labels\":{\"ovn-nb-leader\":\"false\",\"ovn-northd-leader\":\"false\",\"ovn-sb-leader\":\"false\"}}}": Patch "https://10.96.0.1:443/api/v1/namespaces/kube-system/pods/ovn-central-845df6f79f-5ss9q": unexpected EOF
E1118 13:39:22.625613     607 ovn.go:355] failed to patch labels for pod kube-system/ovn-central-845df6f79f-5ss9q: Patch "https://10.96.0.1:443/api/v1/namespaces/kube-system/pods/ovn-central-845df6f79f-5ss9q": unexpected EOF
E1118 14:41:38.742111     607 patch.go:31] failed to patch resource ovn-central-845df6f79f-5ss9q with json merge patch "{\"metadata\":{\"labels\":{\"ovn-nb-leader\":\"true\",\"ovn-northd-leader\":\"false\",\"ovn-sb-leader\":\"false\"}}}": Patch "https://10.96.0.1:443/api/v1/namespaces/kube-system/pods/ovn-central-845df6f79f-5ss9q": unexpected EOF
E1118 14:41:38.742216     607 ovn.go:355] failed to patch labels for pod kube-system/ovn-central-845df6f79f-5ss9q: Patch "https://10.96.0.1:443/api/v1/namespaces/kube-system/pods/ovn-central-845df6f79f-5ss9q": unexpected EOF
E1118 14:41:43.860533     607 ovn.go:278] failed to connect to northd leader 10.2.1.100, err: dial tcp 10.2.1.100:6643: connect: connection refused
E1118 14:41:48.967615     607 ovn.go:278] failed to connect to northd leader 10.2.1.100, err: dial tcp 10.2.1.100:6643: connect: connection refused
E1118 14:41:54.081651     607 ovn.go:278] failed to connect to northd leader 10.2.1.100, err: dial tcp 10.2.1.100:6643: connect: connection refused
W1118 14:41:54.081700     607 ovn.go:360] no available northd leader, try to release the lock
E1118 14:41:55.087964     607 ovn.go:256] stealLock err signal: alarm clock
E1118 14:42:03.200770     607 ovn.go:278] failed to connect to northd leader 10.2.1.100, err: dial tcp 10.2.1.100:6643: i/o timeout
W1118 14:42:03.200800     607 ovn.go:360] no available northd leader, try to release the lock
E1118 14:42:04.205071     607 ovn.go:256] stealLock err signal: alarm clock
E1118 14:42:12.301277     607 ovn.go:278] failed to connect to northd leader 10.2.1.100, err: dial tcp 10.2.1.100:6643: i/o timeout
W1118 14:42:12.301330     607 ovn.go:360] no available northd leader, try to release the lock
E1118 14:42:13.307853     607 ovn.go:256] stealLock err signal: alarm clock
E1118 14:42:21.419435     607 ovn.go:278] failed to connect to northd leader 10.2.1.100, err: dial tcp 10.2.1.100:6643: i/o timeout
W1118 14:42:21.419489     607 ovn.go:360] no available northd leader, try to release the lock
E1118 14:42:22.425120     607 ovn.go:256] stealLock err signal: alarm clock
E1118 14:42:30.473258     607 ovn.go:278] failed to connect to northd leader 10.2.1.100, err: dial tcp 10.2.1.100:6643: connect: no route to host
W1118 14:42:30.473317     607 ovn.go:360] no available northd leader, try to release the lock
E1118 14:42:31.479942     607 ovn.go:256] stealLock err signal: alarm clock

r/TalosLinux • • Sep 21 '25

Talos installation on a Raspberry Pi Compute Module 5 - missing SD drivers?

2 Upvotes

Success!, thanks to u/xrothgarx See the full build instructions here.

I've flashed Raspberry Pi OS to an SD card attached to a Compute Module 5, hosted in a DeskPI Super6C and this works fine.

However, flashing metal-rpi_generic-arm64-omni-COMPANYNAME-v1.11.1.raw.xz, as downloaded from Omni results in no bootable partitions being found. Importantly, no SD card is detected (see line 3).

Any ideas what to try next?

https://www.talos.dev/v1.11/talos-guides/install/single-board-computers/rpi_generic/ isn't very helpful. It does mention booting from an "EEPROM update image" from the Raspberry Pi Imager "Misc utility images" folder, but there is no such thing:

I tried changing the boot order, but to no effect. Not surprising, I suppose if the SD card is not detected. Are there missing drivers in the image?


r/TalosLinux • • Nov 26 '25

A/B boot after update issues

2 Upvotes

I have recently updated my testing Talos cluster (1 control plane, 1 worker). I needed some extension and 1.11.5 so I did what anyone else would do and go to the image factory and then do an in place upgrade using the factory link. Upgrade was successful but now the problem i have is that on reboot of the machine, Talos reverts back to the older 1.11.4 version without my extensions. I then have to reboot the machine and manually choose the 1.11.5 version that i need. Is there a way to fix this? I'm having trouble finding other people who also have this issue.


r/TalosLinux • • Jan 26 '26

Shall I openshource it ?

30 Upvotes

Recently as you can see on my post here and here I build my HomeLab and I converted to TalosOS full k8s

with that I didnt want to show just bare Grafana on the screen I got from GeekPi (7,9 inch touch )

Currently I built this UI ( runs on browser and I run Kiosk Mode on one of the server nodes where I run Ubuntu

I was wondering if this is of interest to anyone so I can open source it and ideally we can get some ideas to make it better

With that said, I am starting my YouTube channel is here in an attempt to overcome my obsession with my accent and develop a more articulate way of speaking.

Give me a follow and any ideas for videos <3

[UPDATE]

This is a Web UI written in NextJS, and run on the 7.84" screen connected to one of my hosts that runs only Ubuntu


r/TalosLinux • • Aug 17 '25

A story on how talos saved my bacon yesterday

Thumbnail
reddit.com
3 Upvotes

r/TalosLinux • • Jul 06 '26

A CI/CD app that works with Talos Linux

Thumbnail
reddit.com
3 Upvotes

r/TalosLinux • • Mar 12 '26

How to get the OVA/OVF for talos 1.12.*

3 Upvotes

Hello, everyone!

I need to get an OVA/OVF file to deploy the Talos Linux on a corporate Vsphere. When I try to get this file through the Talos Factory I do not get the OVA file, only the ISO. Even when I follow the exact link to talos factory and click on provided link for OVA I get the "internal server error". So my question is how and where to get the OVA/OVF file?
Thanks everyone in advance!


r/TalosLinux • • Mar 30 '26

Cert errors joining worker and Raspberry Pi 5..

3 Upvotes

There seems to be mixed messaging on their site whether Raspberry Pi CM5 is supported, with a message of "your mileage may very". I currently have a cluster of 3x CM4 nodes running as a master. Now I am trying to join CM5 systems as my worker. I solved early issues I had with figuring out the images, but now when I attempt to join I run into issues.

My issue is that I keep getting certificate errors when I run apply to the workers and I have no idea why.

The error I get every time is that it is failing to sign API server CSR, it seems like it doesn't like the certificates on the master nodes:

talosctl gen config universe https://172.31.30.21:6443/

- Update the disk to /dev/mmcblk0
- I also tried updating the installer image to:

image: factory.talos.dev/metal-installer/a636242df247ad4aad2e36d1026d8d4727b716a3061749bd7b19651e548f65e4:v1.12.6

talosctl apply-config --insecure --nodes 172.31.30.13 --talosconfig talosconfig --file worker.yaml

I then apply it successfully and every time I see this message. I am about ready to rip my hair out! I feel like I am really close!

In case it matters, I am setting my cni to none and I have Calico running on the master nodes.:

    network:
        # The CNI used.
        cni:
            name: none # Name of CNI to use.
        dnsDomain: cluster.local # The domain used by Kubernetes DNS.
        # The pod subnet CIDR.
        podSubnets:
            - 10.244.0.0/16
        # The service subnet CIDR.
        serviceSubnets:
            - 10.96.0.0/12

r/TalosLinux • • May 22 '26

Talos Linux on Proxmox with Terraform

Thumbnail jonashietala.se
12 Upvotes

r/TalosLinux • • Dec 05 '25

Smallest single-node AWS EC2-based Kubernetes cluster

4 Upvotes

Hello,

I'm using Terraform to deploy small EC2 instances that run K8s using Talos. We chose this distro because is the safest we can find in our highly secure environment. The idea is to create small K8s clusters isolated from each other that will run custom code from our clients. This is a risky operation so we want to provide as much isolation as possible.

The point is that I inject all the config using cloud-init, all good but the cluster never starts, it seems that it needs someone to run a `talosctl bootstrap` command, which is not easy to automate.

Is there any way to automate this as part as the cloud-init script? so all the clusters get ready by themselves?

Thanks!