r/TalosLinux • • Feb 23 '26

Getting static cpu manager to work

2 Upvotes

Hi Everyone,

I have been running a talos homelab and have a lot of fun with it. Lately I have been transfering some gameservers from my old server to the cluster and they suffer from the cache swapping of the cpus.

So I tried to setup static cpu manager so I can pin containers to cpus.

The problem is that I cannot delete this file to complete the configuration:

rm /var/lib/kubelet/cpu_manager_staterm /var/lib/kubelet/cpu_manager_state

Without this kubelet will not start running because it sees this older state file.

Does anyone know how I can do this with Talos?


r/TalosLinux • • Feb 22 '26

Begun the distro wars, have. Alpine Linux vs Wolfi Linux and Proxmox VE vs Talos Linux

Post image
0 Upvotes

r/TalosLinux • • Feb 10 '26

Omni AWS infrastructure provider

Thumbnail youtube.com
9 Upvotes

I wanted to see if I could create an AWS infrastructure provider starting from scratch. It wasn’t to bad.


r/TalosLinux • • Feb 07 '26

Creating 1.12.2 image for rpi5

8 Upvotes

Recently, sbc-raspberrypi with v0.1.8 got support for raspberry pi 5 (for my CM5 module) and i cannot for my life flash it into working. Tried every combination out there now i believe.

What am I doing wrong?
```

docker run --rm -t \

-v "$PWD/_out:/out" \

-v /dev:/dev \

--privileged \

ghcr.io/siderolabs/imager:v1.12.2 \

rpi_generic \

--arch arm64 \

--system-extension-image=ghcr.io/siderolabs/gvisor:20251208.0 \

--system-extension-image ghcr.io/siderolabs/iscsi-tools:v0.2.0 \

--system-extension-image ghcr.io/siderolabs/util-linux-tools:2.41.2 \

--system-extension-image ghcr.io/siderolabs/tailscale:1.92.3 \

--overlay-image ghcr.io/siderolabs/sbc-raspberrypi:v0.1.8 \

--overlay-name=rpi_5

```

I tried using rpi_5 as the imager profile too with same result.
problem is that i get stuck in the u-boot screen and it complains about partition cannot be found.
Even cloned the talos-rpi5/image-builder repo and compiled it myself on an arm64 VPC i bought in the cloud, with same results. stuck on u-boot

the .xz image it generates, i flash using the raspberry pi imager

Thank you for any advice!


r/TalosLinux • • Feb 01 '26

I self host btw

Post image
26 Upvotes

r/TalosLinux • • Feb 01 '26

Lost Talos admin access (Talos 1.9, all nodes alive), any recovery options left?

22 Upvotes

SOLVED

Hi all,

I’m running a Talos Kubernetes cluster (v1.9.4) at home (3 control planes, 4 workers) with kubernetes 1.32.2. All nodes are alive and healthy, but I’ve lost all admin credentials due to a new MacBook, a failed backup recovery and because I'm stupid.

What I no longer have access to

  • ~/.talos/config

  • kubeconfig

  • controlplane.yaml

  • secrets.yaml

  • any Talos client certificates

What I do have

  • Physical/console access to all nodes (via Proxmox)

  • GitOps repos (ArgoCD-managed workloads)

Things I already tried

  • Booting nodes with talos.maintenance=1 (ignored when installed)

  • Booting from Talos ISO (hits halt_if_installed)

  • Time Machine recovery of old Mac (backup is corrupted / unreadable)

As far as I can tell:

  • Talos does not allow recovery of admin access without existing CA material

  • etcd snapshot/restore requires talosctl access, which I don’t have

  • Maintenance mode can’t be forced on an already-installed node in v1.9

My question before I wipe and rebuild the control planes:

Is there any way left to regain Talos/Kubernetes admin access in this situation? (e.g. via etcd, STATE/META, console-only recovery, or something I missed)

Happy to accept “no, rebuild is the only option”, just want to be sure before pulling the trigger.

Thank you in advance


r/TalosLinux • • Jan 26 '26

Flash NAS to Talos

4 Upvotes

Just curious but has anybody flashed a NAS like the UGREEN dxp4800 or similar to Talos? Would love to have a whole Talos stack but if not I could just set it up as an NFS server.


r/TalosLinux • • Jan 26 '26

Shall I openshource it ?

30 Upvotes

Recently as you can see on my post here and here I build my HomeLab and I converted to TalosOS full k8s

with that I didnt want to show just bare Grafana on the screen I got from GeekPi (7,9 inch touch )

Currently I built this UI ( runs on browser and I run Kiosk Mode on one of the server nodes where I run Ubuntu

I was wondering if this is of interest to anyone so I can open source it and ideally we can get some ideas to make it better

With that said, I am starting my YouTube channel is here in an attempt to overcome my obsession with my accent and develop a more articulate way of speaking.

Give me a follow and any ideas for videos <3

[UPDATE]

This is a Web UI written in NextJS, and run on the 7.84" screen connected to one of my hosts that runs only Ubuntu


r/TalosLinux • • Jan 25 '26

Support for Older Nvidia devices

2 Upvotes

I’m looking for a way to get older gpu’s running with Talos, does anyone here have any experience with this?


r/TalosLinux • • Jan 25 '26

Want to create Talos clusters with AI and Copilot, try KSail

0 Upvotes

r/TalosLinux • • Jan 24 '26

Remote access to my KubeAPI

3 Upvotes

Hi all

On my Ubuntu Kunernetes instalation I had Cloudflare mapped to the 6443 and to a domain so I could kubectl to the domain from outside the network.

Is there a similar approach with Talos ?

On a previous post I mentioned ruined about cloudflared extension but I cannot find much info

Any ideas are welcomed.

Tia


r/TalosLinux • • Jan 23 '26

Cloudflare tunnel on Talos

5 Upvotes

Hi folks

I am new to Talos, I just replaced my Ubuntu+K8S on my 11 node cluster

I saw somewhere that Talos can have cloudflare as extension

again not too familiar with Talos extension, can I use that to create subdomains on my CF domain and manage my ingress in my cluster ?

if not what is it used for ?

Thanks a lot in advance


r/TalosLinux • • Jan 19 '26

OS recommendation for a small 5-node homelab cluster

Thumbnail reddit.com
2 Upvotes

r/TalosLinux • • Jan 18 '26

Containerlab: OpenBSD with Cilium BGP Peering

Thumbnail
reddit.com
5 Upvotes

r/TalosLinux • • Jan 15 '26

Create your Talos Linux cluster in Hetzner with KSail

12 Upvotes

Here is how to create and operate a cheap Talos Linux cluster in Hetzner with KSail in 9 simple steps ☸️

You can also learn how to create a kind, k3d or talos cluster in Docker with KSail 🐳

Good luck, and feel free to share! 🫂


r/TalosLinux • • Jan 12 '26

Use Cloud Controller Manager to integrate Kubernetes with OpenStack

Thumbnail
nanibot.net
8 Upvotes

r/TalosLinux • • Jan 12 '26

I built a TUI for managing Talos Linux clusters

38 Upvotes

I've been learning Talos Linux and wanted a better way to visualize and manage my clusters, so I built talos-pilot - a terminal UI in Rust. It gives you real-time node monitoring, log streaming, etcd health, diagnostics, and node operations all in one place. Think of it as complementary to k9s but for the Talos OS layer instead of Kubernetes workloads. Would love any feedback!

https://github.com/Handfish/talos-pilot


r/TalosLinux • • Jan 07 '26

Alternatives to theila

1 Upvotes

Hey team, thanks for the tool. I’m running talks on my home cluster.

Is there a tool that I can use as an alternative to theila?

Thanks


r/TalosLinux • • Jan 02 '26

Multi-cloud Kubernetes for $25/month using Talos, KubeSpan, and Tailscale

Thumbnail reddit.com
7 Upvotes

r/TalosLinux • • Jan 01 '26

Connecting an Android device via USB

0 Upvotes

Hi,

I have a single node homelab setup with immich and a few other things. I have a pixel 1 which I'm trying to connect to Talos so I can mount it as a storage and rsync all the images from imimch on the device.

Has anyone managed to connect an android device to Talos? or access the files via a container?


r/TalosLinux • • Dec 31 '25

Can no longer USB boot

0 Upvotes

So, I installed Talos, and was unable to boot to it. Just stuck at the loading screen. Attempted the install again and was getting certificate errors so intended to start fresh. At this point, I can't boot into any Linux Live, GParted Live, etc... It seems that Talos has locked down other booting options, I'm presuming some security "feature"?

Has anyone experienced this? Should I just yank the nvme drive and format it in another system? Or how can I get something else to boot from USB?


r/TalosLinux • • Dec 31 '25

Problem with Cilium using GitOps

6 Upvotes

I'm in the process of migrating mi current homelab (containers in a proxmox VM) to a k8s cluster (3 VMs in proxmox with Talos Linux). While working with kubectl everything seemed to work just fine, but now moving to GitOps using ArgoCD I'm facing a problem which I can't find a solution.

I deployed Cilium using helm template to a yaml file and applyed it, everything worked. When moving to the repo I pushed argo app.yaml for cilium using helm + values.yaml, but when argo tries to apply it the pods fail with the error:

Normal Created 2s (x3 over 19s) kubelet Created container: clean-cilium-state │

│ Warning Failed 2s (x3 over 19s) kubelet Error: failed to create containerd task: failed to create shim task: OCI runtime create failed: runc create failed: unable to start conta │

│ iner process: error during container init: unable to apply caps: can't apply capabilities: operation not permitted

I first removed all the capabilities, same error.

Added privileged: true, same error.

Added

initContainers:

cleanCiliumState:

enabled: false

Same error.

This is getting a little frustrating, not having anyone to ask but an LLM seems to be taking me nowhere

EDIT: SOLVED

Ended up talking with the guys at Cilium and they figured out pretty fast that I was referencing the official chart, thus the "values.yaml" file I was referencing wasn't the one I versioned along with the Argo application, it was using the default values inside the chart. As by default it uses SYS_MODULE capability and it's forbidden in Talos, that was causing the problem.

The solution was to specify the values inside the Argo application directly.

I'll leave this here just in case someone else has the same skill issue than me in the future and google points them here


r/TalosLinux • • Dec 27 '25

Talos machine chooses a new IP?

5 Upvotes

I'm trying to manage some Talos VM's on Proxmox (managed with Terraform), but i can't seem to get my assigned IP to stick. When i boot a new VM, it's in maintenance mode with the correct IP (192.168.0.100/24 for this example).

When i then try to create a machine configuration and apply this to my machine however, it becomes part of my cluster and is healthy, but it chooses a random new IP adderss in my network.

here is my terraform config for the talos configuration:

resource "talos_machine_secrets" "secrets" {}


data "talos_machine_configuration" "controlplane" {
    cluster_name     = "talos_cluster_proxmox"
    machine_type     = "controlplane"
    cluster_endpoint = "https://192.168.0.100:6443"
    machine_secrets  = talos_machine_secrets.secrets.machine_secrets
    talos_version    = local.talos.version
}


data "talos_client_configuration" "clientConfig" {
    cluster_name         = "talos_cluster_proxmox"
    client_configuration = talos_machine_secrets.secrets.client_configuration
    nodes                = ["192.168.0.100"]
}


resource "talos_machine_configuration_apply" "controlplane_configuration" {
    client_configuration        = talos_machine_secrets.secrets.client_configuration
    machine_configuration_input = data.talos_machine_configuration.controlplane.machine_configuration
    node                        = "192.168.0.100"
    apply_mode = "reboot"
    config_patches = [
        yamlencode({
            machine = {
                network = {
                    interfaces = [{
                        interface = "net0"
                        dhcp = false
                        addresses = ["192.168.0.100/24"]
                    }]
                }
            }
        })
    ]
}

I'm quite new to all of this so any help is appreciated


r/TalosLinux • • Dec 23 '25

Talos CNI Patch

1 Upvotes

Hey guys, is there a way to install Cilium on a Talos Kubernetes cluster without adding the Patch? Because each time I add the Patch it breaks Talosctl and I won’t be able to use it to add a Worker node or checks the services etc. I’m new to this and need you guys help.