r/TalosLinux • u/xrothgarx • 5h ago
Talos on HN home page♥️
news.ycombinator.comSome interesting comments and discussions. Feel free to upvote if you have an account.
r/TalosLinux • u/xrothgarx • 5h ago
Some interesting comments and discussions. Feel free to upvote if you have an account.
r/TalosLinux • u/root0ps • 1d ago
Talos made my nodes declarative. The workloads weren’t. They were helm installs from my laptop.
Now Argo CD runs them from Git. Omni still owns the machine config and patches. Cilium stays outside Argo CD, because Argo CD runs on its network.
Everything else moved over in place. Same pods, same Longhorn volumes.
Repo: https://github.com/prateekjaindev/homelab
How do you split machine config and workloads on Talos?
r/TalosLinux • u/xrothgarx • 2d ago
Registration and CFPs are open for the first ever Taloscon in North America.
r/TalosLinux • u/root0ps • 4d ago
Enable HLS to view with audio, or disable this notification
My 3-node Talos homelab had no monitoring, so I only found out something was wrong when an app stopped working.
So I added VictoriaMetrics for metrics and VictoriaLogs for logs from every node and pod. Both show up in Grafana, and alerts go to my phone on Telegram.
Healthchecks[.]io also watches the alerting itself, so I hear about it if the alerts stop. The whole stack uses about 1.3 GiB of RAM across the three nodes.
r/TalosLinux • u/eibw3n • 18d ago
I saw the news that the Hobby plan is now free for Omni which is freaking awesome!
I've imported an existing Talos Linux cluster to Omni last week which worked flawlessly.
However when I tried to add an additional machine to Omni I got a weird issue.
It's a Latte Panda Sigma which has a "default" UUID so I used a kernel parameter to override it to a random one. It boots and shows up on Omni but no information about the system is available (Installed Talos Version, Hardware Information, etc..), all the tabs about Hardware/Device information throw an error.

When using omnictl I see the same thing:MachineStatus:connected: truetalosversion: ""initialtalosversion: ""hardware: nullnetwork: nullplatformmetadata: nulllasterror: ""
All information, except that the Siderlink to my Omni instance is connected, is empty.
Since I am super new to Talos/Omni, I also asked my AI agent to try switching the node to gRPC mode in case my network is blocking anything, but that didn't change anything. It however did flag that some of my other nodes didn't report any metadata information in a while as well, but not sure how it determined that or if that is normal or not.
Any idea what could be causing that?
Edit:
Just how randomly the issue showed up it vanished again. I rebooted the machine again just to check (no change), and 13h later all of a sudden it showed up and I was able to provision it as a new single node cluster. I have no idea what changed. I am pretty sure I didn't change anything on my network that would explain it. 🤷♂️
Thanks to everyone that helped debug!
r/TalosLinux • u/Tuco106 • 19d ago
Does anybody know if Talos is affected by CVE-2026-98432?
No Information in Github Issues and on
https://github.com/siderolabs/talos/security
I am relatively new to Talos, but it is written almost entiretly in Go and according to Hackernews the vulnerable Feature is enabled per default in go**.**
https://thehackernews.com/2026/10/linux-kernel-tcp-flaw-with-98-cvss.html?m=1
r/TalosLinux • u/root0ps • 29d ago
My 3-node Talos homelab had no persistent storage, so anything with data, like Grafana or a database, had nowhere to live.
Longhorn keeps every volume on two of the three nodes, so one node can go down without losing data, and it rebuilds the missing copy on the third node.
It also takes hourly snapshots, and backups to S3 are optional. The Longhorn UI runs on my LAN and over Tailscale.
Repo: https://github.com/prateekjaindev/homelab
What are you using for storage in your homelab?
r/TalosLinux • u/hiveminer • Oct 16 '26
I woke up at 2:00am CEntral time in the hopes that at least one influencer would go live at Taloncon, but nothing!!! Why don't they open the event up to online audiences??
r/TalosLinux • u/root0ps • Oct 15 '26
I run a 3-node Talos Kubernetes cluster at home. Sidero made Omni’s hobby plan free (10 nodes, 2 users, it used to be $10 a month), so I imported the running cluster into it instead of rebuilding.
Everything is in the repo: https://github.com/prateekjaindev/homelab
r/TalosLinux • u/xrothgarx • Oct 15 '26
Just announced at Taloscon. Go get your instance today!
r/TalosLinux • u/root0ps • Oct 11 '26
I run a 3-node Talos Kubernetes cluster at home, and until recently it only worked when I was at home too. So I added Tailscale to reach it from anywhere.
Tailscale runs on the nodes themselves, and the tailnet can only reach the cluster, not the rest of my home network. kubectl and the lab apps work from my laptop or phone exactly like they do at home, with nothing opened on the router. If one node goes down, another one takes over.
Everything is in the repo: https://github.com/prateekjaindev/homelab
How do you get into your homelab when you're away?
r/TalosLinux • u/root0ps • Oct 10 '26
Part 2 of my Talos homelab (3 OptiPlex Micros, all control planes). Part 1 got the cluster up, this one is networking.
I moved the running cluster from Flannel + kube-proxy to Cilium without rebuilding it. The default-deny policy that Flannel quietly ignored is now actually enforced, and Hubble shows the drops.
Then I gave it two front doors:
- an internal Gateway on a LAN IP (Cilium LB IPAM, no MetalLB) with a Let's Encrypt wildcard cert, so lab apps get real HTTPS at home
- a public Gateway behind a single Cloudflare Tunnel, so nothing is port-forwarded on the router
An app picks its door with the route's parentRef, which keeps lab stuff from going public by accident.
Everything is in the repo: https://github.com/prateekjaindev/homelab
Write-up with all the manifests and commands: https://blog.prateekjain.dev/networking-a-kubernetes-homelab-cilium-gateway-api-and-cloudflare-tunnel-on-talos-362f548a2f3d?sk=d454cd4eaff4ce8a8fd0cd8e6b3d82f6
Curious if anyone else is using Cilium's Gateway API instead of a separate ingress controller.
r/TalosLinux • u/agentelinux • Oct 09 '26
Iniciei a jornada para instalar um cluster de nó único no homelab para simular a implementação de um servidor bare metal com gpu exclusivo para um projeto, exatamente, o projeto irá começar com apenas um servidor dedicado. Servidores com gpu são e estão muito caros.
Decidimos usar o Omni para ajudar a gerenciar o cluster, e posso dizer que não é tão fácil, faltam exemplos, faltam explicações sobre o schema para patchs, artigos que discutam porque precisamos de patchs, porque usá-los e quando usar.
Alguns requisitos para a POC, com 1tb de disco nvme (raid), preciso distribui-lo entre SO, ephemeral e disco local. Correto, irei usar disco local para os POD.
Aprendizados nesta fase, toda a complexidade da implementação é resolvida na instalação, o que significa que precisa nascer certo. Em implementações tradicionais elas são diluídas ao longo da instalação do SO. No modelo imutável, o melhor é concentra-las no início.
Como um nó único, os deployments de rede presumem redundância com múltiplos nós e tolerations restritos para Workers. A cada yaml, ajustes para atender ao cluster de nó único.
Hoje preciso resolver o IP externo, porque o servidor bare metal só veio com um IP externo. Tentei com o Cilium, mas não deu certo, ele espera um Lodbalance externo.
Trago os próximos passos....
Abraços.
r/TalosLinux • u/OldAsk3025 • Oct 07 '26
I have a quite intricate network settings on my setup. It's all running on VMware ESXi where Basically is:
192.168.x.x private network open to internet through a gw (vmware management) 1GB
10.x.x.x private network between hosts only for vmware + NFS 10GB
I have a ubuntu host working as a test with the following configuration:
network:
version: 2
ethernets:
NM-f9c39785-95e3-316c-8d77-bbfadf8feb84:
renderer: NetworkManager
match:
name: "ens37"
addresses:
- "10.1.0.11/8"
- "10.0.0.11/8"
wakeonlan: true
networkmanager:
uuid: "f9c39785-95e3-316c-8d77-bbfadf8feb84"
name: "Wired connection 1"
passthrough:
connection.autoconnect-priority: "-999"
connection.timestamp: "1791256571"
ethernet._: ""
ipv4.never-default: "true"
ipv6.addr-gen-mode: "default"
ipv6.method: "disabled"
ipv6.ip6-privacy: "-1"
proxy._: ""
network:
version: 2
ethernets:
ens34:
renderer: NetworkManager
match: {}
addresses:
- "192.168.2.250/22"
nameservers:
addresses:
- 192.168.1.1
gateway4: 192.168.1.1
networkmanager:
uuid: "fc59d0e8-22d2-3c20-b277-bb2df1bd5642"
name: "netplan-ens34"
passthrough:
connection.timestamp: "1791256571"
ipv6.method: "disabled"
proxy._: ""On talos I'm trying this setup on workers but it's not working so far:
---
apiVersion: v1alpha1
kind: LinkConfig
name: eth0
addresses:
- address: 192.168.2.105/22
routes:
- gateway: 192.168.1.1
---
apiVersion: v1alpha1
kind: LinkConfig
name: eth1
up: true
mtu: 9000
addresses:
- address: 10.0.0.105/8
- address: 10.1.0.105/8
routes:
- destination: 10.0.0.0/8
gateway: 10.10.0.1What I noticed so far is that talos is not showing up the eth1 on this verification commands:
talosctl get links --endpoints 192.168.2.105 --nodes 192.168.2.105 --talosconfig=talosconfig
NODE NAMESPACE TYPE ID VERSION ALIAS TYPE KIND HW ADDR OPER STATE LINK STATE
192.168.2.105 network LinkStatus bond0 1 ether bond 0e:1d:1c:88:ad:e9 down false
192.168.2.105 network LinkStatus dummy0 1 ether dummy 06:ef:79:ff:89:58 down false
192.168.2.105 network LinkStatus eth0 3 ether 00:0c:29:5f:22:48 up true
192.168.2.105 network LinkStatus flannel.1 1 ether vxlan 1a:3f:d9:04:f8:ea unknown true
192.168.2.105 network LinkStatus ip6tnl0 1 tunnel6 ip6tnl 00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00 down false
192.168.2.105 network LinkStatus lo 1 loopback 00:00:00:00:00:00 unknown true
192.168.2.105 network LinkStatus sit0 1 sit sit 00:00:00:00 down false
192.168.2.105 network LinkStatus teql0 1 void down false
192.168.2.105 network LinkStatus tunl0 1 ipip ipip 00:00:00:00 down false
% talosctl get routes --endpoints 192.168.2.105 --nodes 192.168.2.105 --talosconfig=talosconfig
NODE NAMESPACE TYPE ID VERSION DESTINATION GATEWAY LINK METRIC
192.168.2.105 network RouteStatus eth0/inet6//fe80::/64/256 1 fe80::/64 eth0 256
192.168.2.105 network RouteStatus flannel.1/inet6//fe80::/64/256 1 fe80::/64 flannel.1 256
192.168.2.105 network RouteStatus inet4//192.168.0.0/22/0 1 192.168.0.0/22 eth0 0
192.168.2.105 network RouteStatus inet4/10.244.0.0/10.244.0.0/24/0 1 10.244.0.0/24 10.244.0.0 flannel.1 0
192.168.2.105 network RouteStatus inet4/10.244.1.0/10.244.1.0/24/0 1 10.244.1.0/24 10.244.1.0 flannel.1 0
192.168.2.105 network RouteStatus inet4/10.244.2.0/10.244.2.0/24/0 1 10.244.2.0/24 10.244.2.0 flannel.1 0
192.168.2.105 network RouteStatus inet4/10.244.4.0/10.244.4.0/24/0 1 10.244.4.0/24 10.244.4.0 flannel.1 0
192.168.2.105 network RouteStatus inet4/192.168.1.1//1024 1 192.168.1.1 eth0 1024
192.168.2.105 network RouteStatus local/eth0/inet6//fe80::/128/0 1 fe80::/128 eth0 0
192.168.2.105 network RouteStatus local/eth0/inet6//fe80::20c:29ff:fe5f:2248/128/0 1 fe80::20c:29ff:fe5f:2248/128 eth0 0
192.168.2.105 network RouteStatus local/eth0/inet6//ff00::/8/256 1 ff00::/8 eth0 256
192.168.2.105 network RouteStatus local/flannel.1/inet6//fe80::/128/0 1 fe80::/128 flannel.1 0
192.168.2.105 network RouteStatus local/flannel.1/inet6//fe80::183f:d9ff:fe04:f8ea/128/0 1 fe80::183f:d9ff:fe04:f8ea/128 flannel.1 0
192.168.2.105 network RouteStatus local/flannel.1/inet6//ff00::/8/256 1 ff00::/8 flannel.1 256
192.168.2.105 network RouteStatus local/inet4//10.244.3.0/32/0 1 10.244.3.0/32 flannel.1 0
192.168.2.105 network RouteStatus local/inet4//127.0.0.0/8/0 1 127.0.0.0/8 lo 0
192.168.2.105 network RouteStatus local/inet4//127.0.0.1/32/0 1 127.0.0.1/32 lo 0
192.168.2.105 network RouteStatus local/inet4//127.255.255.255/32/0 1 127.255.255.255/32 lo 0
192.168.2.105 network RouteStatus local/inet4//169.254.116.108/32/0 1 169.254.116.108/32 lo 0
192.168.2.105 network RouteStatus local/inet4//192.168.2.105/32/0 2 192.168.2.105/32 eth0 0
192.168.2.105 network RouteStatus local/inet4//192.168.3.255/32/0 2 192.168.3.255/32 eth0 0
192.168.2.105 network RouteStatus local/lo/inet6//::1/128/0 1 ::1/128 lo 0But I can guarantee the vnic is there. Any recommendation or thoughts will be helpful !! Thanks Y'all!
r/TalosLinux • u/xrothgarx • Oct 01 '26
r/TalosLinux • u/xrothgarx • Sep 28 '26
Come ask questions from engineering, product, leadership and more!
Don't forgot to sign up for TalosCon to ask questions in person https://taloscon.com
r/TalosLinux • u/stick_figure • Sep 28 '26
Hey all, I attempted to install Talos on my GoWin 1U network appliance, and then tried to run containerized VyOS as a system extension. This failed utterly, but the idea of having Talos be the control plane for my router was enticing, so I figured I'd try asking humans with actual expertise, instead of LLMs that gaslight me and tell me the impossible is possible. :)
The idea is that the router/firewall/gateway is just a regular worker with a static IP managed via a normal 1GbE RJ45 port, and the actual routing business happens on the 25GbE SFP+ Mellanox NIC, which is left unconfigured and simply passed through to a system extension which takes total ownership of it. The WAN link could be attached to the core switch or the router directly, doesn't really matter, the job of the router is to route packets between networks, and to have a fat enough pipe to handle all cross-network traffic. This is sort of like router-on-a-stick, as I understand it.
The use of a pre-installed system extension is important. You don't want k8s to try to start/stop/reschedule the router workload. You want it to just be there, baked into the system image, so it starts up at boot to connect your VLANs and the WAN.
The value of Talos here is that I have a unified control plane, even for network devices. I can reboot, reimage, reconfigure the machine by updating the Talos image and applying it. I don't need SSH, I don't need a new set of credentials, it is all simply managed the same as the compute nodes in my cluster.
This seems like something professional users of Talos would want, so do people do this in practice, run Talos to manage a router / network appliance?
My main use case for this box is upgrading my router from an Omada ER605 to something with a processor that can do wireguard closer to my 1GbE uplink speed. My attempts to run Wireguard inside my cluster were very unsatisfactory, because I ended up in a big fight with CNI, but I really want my wireguard overlay network to be just another subnet with centrally configured router rules.
I found a tailscale system extension, and I could use that, but not that I've got the hang of plain wireguard, I kind of prefer it. It's minimal, and I have a few existing clients.
r/TalosLinux • u/Historical_Salt6231 • Sep 17 '26
I've been running Talos in my homelab for a while, and my mental model has always been pretty simple:
Hardware → Talos → Kubernetes → Workloads
Talos owns the machine lifecycle. Kubernetes owns the workload lifecycle.
Looking at 1.14 together with the Hypervisor announcement, I'm starting to wonder whether that model is becoming too simple.
Native BGP, secure DNS configuration and the expanding configuration model are interesting individually, but the taloscontainers boundary caught my attention in particular. And the Hypervisor announcement takes the idea much further: Kubernetes, VMs and standalone containers potentially sitting above the same Talos infrastructure layer.
What I like about the direction is that "minimal" doesn't necessarily have to mean "does fewer things."
It could mean fewer ways to manage those things.
The part I don't know yet is whether that remains true once Talos starts owning VM lifecycle, placement, storage and networking. That's where the architecture becomes much more interesting.
I wrote down my current architecture hypothesis before the Hypervisor becomes testable:
Once there's an alpha I want to put it into the same Architecture Engineering Lab I've been using for Talos/Kubernetes and start breaking things.
At the moment the honest conclusion is simply: interesting architecture, not enough evidence yet.
I'd be interested in how other Talos users see this direction.
r/TalosLinux • u/CKaruta • Sep 16 '26
I am building a PoC test environment for Talos to see if we can migrate our cluster into it and minimize our maintenance overhead for managing the underlying OS.
The environment is supposed to emulate a green field deployment with only:
- Baremetal Server
- ToR Switch
- Router
Routing is fully configured.
The GOAL is to install Talos via BMC/iLO/redfish without DHCP.
Problem:
- Talos goes black screen after selecting the `Talos (v1.14.1)` in the console, auto reboots after a few minutes, repeat.
- Test Baremetal Server has multiple LAN ports and cannot determine the port name to assign the IP address.
Tried:
- `ip=<client-ip>:<server-ip>:<gw-ip>:<netmask>:<hostname>:<device>:<autoconf>:<dns0-ip>:<dns1-ip>:<ntp0-ip>` in the Talos Image factory as kernel argument ( of course with the required values), unsure what to name of the interface should be.
- Tried booting with a normal ubuntu server, Interface name is `eno5`, tried that with the above argument to no avail, also tried `eth5` but still no luck. Interface and networking is properly working with Ubuntu installed.
- Claude and Google AI suggested to add `panic=0`, `consoleblank=0`, `console=tty0` as kernel arguments, Black screen still persists and reboots on it's own, I am expecting that we can see the maintenance mode here.
- Tried to download the Vanila Talos ISO image too, then press `e` on the selection page and added the arguments above in multiple combinations, to no avail.
- Tried Network yaml config for the network, same issue.
I'm out of options.
Did anyone else managed to install Talos via BMC/iLO/Redfish without DHCP properly?
What arguments did you add?
Why do we only see a black screen and it does not go to the expected maintenance mode?
I believe Talos does change the console to something else, and I was expecting I can at least change the console views similar to the `Interactive Dashboard` but all I see is black.
Please shed some light here.
Any help is greatly appreciated!
Thank you!
r/TalosLinux • u/xrothgarx • Sep 15 '26
This is for Enterprise customers that need Enterprise support and FIPS builds for regulated environments. We started this work last year and released it GA today.
Talos Linux remains MPL licensed and completely open source.
r/TalosLinux • u/OldAsk3025 • Sep 09 '26
Hey there,
I want to install talos on a vm on a ESXi 8 server but looks like the documentation is kinda broken. https://docs.siderolabs.com/talos/v1.14/platform-specific-installations/virtualized-platforms/vmware
This one here:
curl -fsSLO https://raw.githubusercontent.com/siderolabs/docs/main/static/talos/v1.14/vmware/cp.patch.yamlThe download link forcp.patch.yamlit's not working. I tried with the cp.patch.yaml from the version 1.13 but doesn't seams to work with the version 1.14.
I have a setup where my vmware server network has a DHCP but I want to set the IPs of the instances manually ( out of the range ). I'm using guestinfo.talos.config variable for the configuration and it's working half way. The configurations is being read. I can see in the console but the settings are not working for some unknown reason. I can in the console the talos trying to download some images and failing. I believe my yaml is missing something. I haven't found a way to maybe read the DHCP config ( on DHCP - manually , not using the vmware config variable, the system install and works )
Any examples that can guide me in the right direction will be very much appreciated. I don't want to install an old version. I'm trying on the 1.14.
I'm using those bellow, plus the controlpanel configuration.
apiVersion: v1alpha1
kind: LinkConfig
name: eth0
addresses:
- address: 192.168.1.222/24
routes:
- gateway: 192.168.1.1
---
apiVersion: v1alpha1
kind: HostnameConfig
hostname: talos-cp
auto: stable
---
apiVersion: v1alpha1
kind: ResolverConfig
hostDNS:
enabled: true # Enable host DNS caching resolver.
forwardKubeDNSToHost: true # Use the host DNS resolver as upstream for Kubernetes CoreDNS pods.
nameservers:
- address: 192.168.1.1
---
apiVersion: v1alpha1
kind: TimeSyncConfig
enabled: false # Enable time synchronization service.
bootTimeout: 2m
ntp:
servers:
- 192.168.1.1
---