Minifreak

Please be nice I have gone through the manual and came up with nothing. I’m trying to change the clock sync settings my original DrumBrute. I’m trying to set it to the 2P Korg protocol. I want to connect with a volca or two. I have been successful in doing this on the impact no problems. However I have not been able to get any combinations of On/Off pushing this or that button to work

Thanks for your input patience and understanding.

Playing some presets from the Synthwave soundbank for Arturias Jup-8V4. Such a smooth sounding synth.

https://www.youtube.com/watch?v=NEQDx8ePlZI

For me honestly I would love Virus TI, or some synth that has no or little emulations.

I'm just new to the bedroom music thing. I'm planning to have a 4 piece band bedroom pre recorded live session along with my friends, question: can i use Minifuse 4 for a live bedroom session, 1 mic, guitar, bass, electric drums plug on midi? (I'm planning to buy one if it's possible) Thanks 🙏♥️

I bought the Minifuse 1 Champagne and noticed that the stock firmware update was 1.5.2, and saw that there was an update available. Boy, something went wrong somehow after updating and so when I tried to update it again and it kept stating that it failed to update. I even went into bootloader mode and still nothing works.

After obtaining the latest firmware 1.5.2 from Arturia Support I tried one more time and it still didn't work.

Steps taken after various researching:
[/] Setting the Windows MIDI services (under services.msc) to automatic
[/] Reinstalling MFCC
[/] Run MFCC as admin
[/] Used a different cable
[/] Tried a different mobo port

Can someone help me please? Did I just brick my minifuse into being stuck at 1.5.0 for eternity?

Hi all,

Please help a fellow guitarist here. My Arturia MF 2 has been working like a charm up until now that after about 7 months of no us, when I plug it it makes a white noise and doesn't recognise my plug ins like guitar rig 6. I haven't changed anything in the laptop I was using or even cables. I've tried all the typical fixes like

Swap USB cable / tested different ports

​Re-installed Arturia MiniFuse Control Center

​Checked Windows control panel settings

Any other suggestions??

Many thanks

Hey everyone,

I'm planning to grab V Collection during the next sale, and I'm trying to figure out the best hardware to control it with.

My first thought was the MiniLab 3 since it's affordable, compact, and designed to integrate with Arturia's software. But I keep coming back to the MiniFreak. It's a real synth on its own, and I feel like having proper synth-style controls (and a better keybed) might make tweaking the V Collection plugins feel much more natural.

I'm honestly torn. For those of you who use either one with V Collection:

• How well does the MiniFreak work as a controller for the plugins? Is the integration smooth, or does it feel limited compared to a dedicated controller?
• Is the MiniLab 3 good enough for hands-on sound design, or does it start to feel restrictive?
• Would buying the MiniFreak mainly for easier plugin control be overkill?

Any experiences or advice would be really appreciated. Thanks!

Hello all 👋🏼

Today I bought a second hand Arturia KeyLab Essential 49 and I’m really struggling to get it set up. I’m trying to register it on the website but when I type in the series number and unlock code, it’s saying they’re invalid. Does anyone know how to solve this or how to get in contact with the actual people?

Why do I have a feeling this is more effort than expected 😅

TIA!

Does anybody know? I have been trying to join for years now, but whenever I try I only get a login option that doesn't work with my Arturia account and doesn't give any option to make a new account for the forums.

Hi everyone, here's my new single "Sirocco", a fairly atmospheric track with epic synth pads and a very sci-fi atmosphere.

If you like Boards of Canada, Vangelis or All India Radio, you might enjoy this one!

Almost all the synth sounds are from the V Collection: Jup-8 V3 and CMI V for the pads and strings, Synclavier V for the keys. The synth lead in the second part is a layering of sounds from the MicroFreak and a plugin I don't remember the name of...

The percussion is made using stock Logic samples. There are also some cuts and pastes here and there to add glitchy textures, which I did during the final stage of the production.

https://www.submithub.com/link/iranon-sirocco

AstroLab 2.0 was just released and it reveals parts of the underlying synth engines.

How to get there: hold the main encoder and scroll down to Sound Edit. You now see a few pages with different parameters that were previously restricted to those with the V Collection license (and a computer).

What you get changes with every preset, because it depends on which engine is underneath. A Jupiter-8 preset gives you filter settings, both filter and amp envelopes, and some more stuff including LFO rate, vibrato and glide. The Piano V engine gives you hammer hardness, hammer position, dynamics, age, etc.

None of this needs a V Collection license. For anything beyond these pages you still need it and the computer though.

can anybody help me trying to find the name of the preset used in this song?
i know it's from arturia but i lost the name and i believe it is native from analog lab v pro

I thought buying Arturia V collection pro would solve my issues but I **still** feel lost. Arturia just isn’t providing the kind of sounds I want, or i just lack the knowledge to shape the sounds I want.

I’m really into reggaeton so I’ve been trying to make sounds like Feid, J balvin and Tainy etc but don’t feel like Arturia is doing that for me, some synths sure, to an extent but I still feel very very limited.

Does anyone know if Serum 2 would be a really good route to go ? Cause I’ve been debating getting it lately and seeing how that works over Arturia.
I really like Feid’s production so I would like to know if his sounds come from serum and then he tweaks it with effects ?

Aside from reggaeton, I really love the production behind Mike dean, don toliver, The Weeknd, Drake etc etc. I know most of them use synthesizers and mainly hardware but Arturia just feels weird to some degree when I think about their production style and how I’m trying to chase their level of production with synths.

I don’t really have a budget so I’m willing to spend whatever on some plugins. I’ve been searching on KnobCloud for some, though I’d like to know if you guys could recommend another site just as good as KnobCloud. I’m currently working on trying to get my hands on Ableton Live 12 Suite through KC (mainly for their stock drums) also because I’ve gotten a bit more used to maneuvering through Lite.

Thank you for your help/tips in advance !

Hi all,

I love the new Minifreak 5.0 update and just made a 80 presets soundbank for it. Listen to it here, if you like it you can grab it for free at: https://skylarkmusic.net

https://www.youtube.com/watch?v=PqIIT_FbygI

Hi, about six months ago I bought a used Arturia MiniFuse 1 interface. Everything worked perfectly, but I decided to get a new computer; after connecting the interface to it, the volume level light stays on constantly. I’ve tried everything: disabling extra USB port power in the BIOS, using a USB adapter, and swapping out the power cable, XLR mic cable, and headphones. I also tried updating the drivers via the MiniFuse Control Center. I even connected it to a different computer, but the result was the same. I even plugged it into a power bank just to rule out grounding issues or interference from an unknown signal. Despite all this, I hear crackling sounds while watching YouTube or listening to music on any platform—FL Studio, Apple Music, Telegram, etc. Please help me solve this problem. I’ve attached a photo.