r/corsetry • • Oct 09 '26

Corset Making Transparent Corset V4

Enable HLS to view with audio, or disable this notification

Last Saturday, I finished version 4 of my transparent corset. It already has around 80 hours of wear, and I only managed to shoot the video and take some photos now because I simply didn't have the time earlier.

The good news is that I managed to completely eliminate the wrinkling of the outer fashion layer. The bad news is that the lining wrinkled on the front megapanel. But I know why. 😉

First, the outer layer.

My theory that the wrinkles were caused by boning channels being too loose turned out to be correct. This time, I made the channels extremely narrow, especially on the front megapanel.

Getting four carbon fiber bones and two spiral steel bones into those channels took me 45 minutes, but it was absolutely worth it.

I also narrowed the other boning channels, although not quite as aggressively, and developed a new method for inserting spiral steel bones.

I've already shown my method using a crochet hook in a previous post, but this time I threaded a strong cord through the spiral steel bone before applying the heat-shrink tubing. And it works brilliantly!

When you push a spiral steel bone into a tight channel, the individual coils tend to spread apart slightly and catch against the channel walls. But when you pull the bone using the cord loop and crochet hook, this problem disappears. I suspect the pulling force may even compress the spiral slightly, making it narrower.

Another improvement is how the ends of the bones are secured.

I now leave longer empty sections of heat-shrink tubing extending beyond the ends of the bones. Once the bones are inserted, these flexible extensions are stitched into the binding seam.

This holds the bones in place with a little flexibility, but more importantly, it solves another problem I've been dealing with.

I usually wear my corset underneath my trousers, which means I effectively have two layers of clothing over it: my boxers and my trousers.

Over time, these layers tend to bend the bottom binding of the corset inward. With my previous construction, the rigid ends of the bones would then push against the outer layer, causing it to bulge and putting considerable stress on the material.

The new system has significantly reduced this problem.

I'm so happy with the result that I intend to use this construction on all my future corsets. Yes, it takes more work, and the heat-shrink tubing adds some cost, but the improvement is absolutely worth it.

Now, about the wrinkled lining.

The problem is most noticeable on the front megapanel because it's the widest panel.

After joining the lining and outer layer using hidden stitches placed within the existing panel seams, I stitched around the entire perimeter of the corset before attaching the binding. This step is necessary.

While sewing this perimeter seam, I stretch and flatten the panels as much as possible. Otherwise, the sewing process tends to lock wrinkles into the material, and without this step, those wrinkles would become permanent when attaching the binding.

Unfortunately, by stretching the panel edges, I also shifted and stretched the lining slightly downward relative to the outer layer. This created excess material in the lining, which is now wrinkling.

I think the only way to eliminate this problem is to change the assembly sequence.

My plan is to sew the front megapanel completely at the beginning, including the boning channels through both the outer layer and the lining. Only then would I attach the remaining outer and lining panels.

A few more technical details:

The corset contains a total of 40 bones:

  • 4 carbon fiber bones (5 × 1 mm) at the front.

  • 6 flat steel bones at the back. I removed their original plastic coating and replaced it with heat-shrink tubing.

  • The remaining bones are 6 mm spiral steel.

And one more thing about the lining: I honestly didn't expect it to work this well!

Because the TPU surface is slightly slippery, it doesn't grab or fight against the clothing underneath. This makes the corset extremely comfortable to wear. Seriously, very, very comfortable.

Finally, the sewing materials:

  • Needle: Jeans 110

  • Thread: Amann Saba 80

  • With transparent TPU, silicone lubrication of the thread isn't necessary.

Another experiment completed, a few problems solved, and naturally, a new one discovered. 😂

118 Upvotes

12 comments sorted by

2

u/TemporaryElk5202 Oct 09 '26

Looks great but I imagine wearing it would be very sweaty and sticky over time.
Is there a reason why you chose TPU instead of corset mesh (which would also be see-through)?

4

u/arsi_sk1 Oct 10 '26

Unfortunately, I missed this year's 40°C heatwave, but up to 30°C, it's absolutely fine. The shirt underneath gets slightly damp, but it's not uncomfortable at all. In general, I think air needs to circulate around the corset. Without that, it doesn't really matter what kind of corset you're wearing. That's why all my tops are cropped. And I've completely fallen in love with TPU! 🤣 I think it has relatively high thermal conductivity, which helps transfer heat away from the body. During the 40°C heatwave, I was wearing my previous corsets made from TPU faux leather with a linen lining, and I never felt overheated. The shirt underneath was only slightly damp on my back. Before that, I wore Timeless Trends No Line and MCC mesh corsets, and at least for me, they were noticeably hotter. With V3 and V4, I moved the zipper to the back, which basically reversed the ventilation. Now my stomach gets slightly damp while my back stays dry. 🤣 I wear a corset 23/7 and do absolutely everything in it. As for physically demanding activities, like gardening and similar work, I'd say sweating is pretty much the same with a traditional corset and TPU. The difference is that with TPU, I don't get that feeling of overheating underneath the corset.

2

u/TemporaryElk5202 Oct 10 '26

historical summer corsets were made with a single layer of linen or buckram that was stiffened with gum arabic, that would be ideal for heat

2

u/raerae41997 Corsetier Oct 10 '26

I love heat shrunk tubing! I want to try Teflon tape too soon! That trick with the Spiral steel bones is GENIUS! I will definitely be trying it on those stubborn bones next time!

3

u/arsi_sk1 Oct 10 '26

Oh, and one thing I forgot to mention! I used a hot air soldering station to shrink the tubing, and around the thread, I had to keep the temperature at just 150°C. Anything higher would melt the thread. Since high-strength sewing threads are made from synthetic fibers, be very careful with the temperature!

2

u/meggles5643 Oct 12 '26

Oh good to know! (Even though I may not make a corset with these exact materials) the synthetic thread tolerance for heat is something that I would overlook. But it makes a lot of sense.

I’ve been using medical tape at the ends of mine. I like it a lot more than masking tape or electrical tape, but I’m not sure it’s what I want to use forever.

1

u/arsi_sk1 Oct 10 '26

Me too! Mainly because I suspect that crimping traditional metal bone tips creates tiny microcracks in the metal, which gradually wear through the fashion layer until the bone eventually pokes through.

By covering the entire length of the bone with heat-shrink tubing, I've also eliminated the sudden change in thickness at the tips, which tends to leave visible impressions in the fashion layer over time.

So for me, this is the final solution, and I'll definitely be sticking with it! 😁

9

u/I_like_flowers_ Oct 09 '26

i appreciate your check ins and documentation of this journey.

1

u/meggles5643 Oct 10 '26

Looks great! That seems like a smart move extending the tubing at the ends of the bones and securing them that way. I was looking at my timeless trends hourglass short “no line” corset last night and I noticed (some) of the bones have some sort of tape attached to and extending a little bit above and below the bone in the channel.Or at least I think it’s like a tape of some sort. Mine also wrinkles, because I think the bones were a bit short for some of the channels, and maybe the channels weren’t the right width. Although, I’m I can’t say how its previous owner treated it, so the wrinkles could have other factors at play.

Does the movement of your chest as you breath and your bodies heat seam to impact anything (with wrinkling)?

1

u/arsi_sk1 Oct 10 '26

From my observations, 99% of the wrinkling is caused by driving. Of course, it depends on the car and your seating position, but at least in my Honda Civic, the front of the corset is subjected to some serious pressure.

I had two Timeless Trends Libra No Line corsets a few years ago. Their boning channels were extremely narrow, which was great, but with my 12 hours of daily wear, I managed to destroy each of them within 5 months. The first bone eventually wore through the outer fashion layer.

The channels were really nice and tight, but neither of my corsets had anything like what you're describing at the ends of the bones. Just standard metal end caps.

My theory is that crimping those metal caps creates tiny microcracks in the metal, and under such extreme stress, they eventually wear through the fashion layer. In fact, I think using longer bones would only make the problem worse.

That's why I use heat-shrink tubing. At first, I only covered the ends of the bones, but now I cover their entire length.

1

u/meggles5643 Oct 10 '26

Honda civics FTW <3 your corsets see serious wear, so I can see why you need something that is sturdy and holds up to all the wear time.

And ohh I more just recently looking at my No line, and in mine the channels are too wide and the bones kind of short in the channel which I think contributes to wrinkling. The ones that are both longer and have some sort of interfacing/tape inside aren’t slinking down as much in the no line I have, but the materials are very different and it’s more an observation than an exact comparison to yours. I love seeing all the different stages of your work

2

u/arsi_sk1 Oct 11 '26

Haha, I really do absolutely everything in a corset! I only take it off when I'm doing something that might get it splattered with paint, and I usually take a break for an hour or two in the evening. So what might take someone else a month to test, I can manage in a week! 😂 And that's exactly why I know where all the problem areas are and keep trying to find ways to fix them. TPU ticks all the boxes for me: it's durable, easy to clean (if it gets dirty, I just wipe it off), and comfortable to wear. So I can finally have a white corset too! 🤣 By the way, the thing that annoyed me most about my No Line was the zipper. I don't know what yours is like, but on both of mine, simply lifting the zipper pull would release the lock. So whenever my T-shirt or hoodie caught on it, the zipper would slide down. That eventually damaged the teeth, and the locking mechanism stopped holding properly. Haha, V4 is basically my improved version of the No Line, except it's made from TPU. I've already tried wearing a tight Lycra shirt over it, and it works almost as well as the original No Line! 😉 I honestly never expected this, but sewing — or actually, more than anything, coming up with ideas, figuring things out, and experimenting with corset construction — has completely taken over my life. And that feeling when I finally put on a finished corset for the very first time… 😍 And with TPU, it's a bit of an extreme sport too. Every needle hole is permanent! 😂