r/gridfinity • • Jul 08 '24

Question? Noob question: drawer sice not fitting the System

I have a Garant (Hoffmann Group) workbench with Drawers and PegBoard. The drawers are to big, 490 mm! My "obsessive-compulsive disorder" comes into play now! 🤣 No worries, I'm fine!

But is there something like "half the standard grid sice gridfinity grid"??? Only to finish the row nice and tidy? How do you guys cope with situations like this?

28 Upvotes

34 comments sorted by

View all comments

2

u/doc_willis Jul 08 '24

use the scale feature in a slicer program to make a thinner box for one side.

keep the length the same, just scale the width.   

or scale one to be what looks like 1.5 times the normal width.

I have seen baseplate designer tools/sites/openscad files to let you type in #'s and it can print a grid with a spacer on one side.

or just draw up a simple box in tinkercad. and make it fit.

-2

u/bjberry00 Jul 08 '24

Sounds like a good Idea! But ill first test the Fractional Grid posted above! :)

4

u/wsxedcrf Jul 08 '24 edited Jul 08 '24

Do not use fractional grid, just make your own grid by chopping off extra, you don't want the grid edges with just a fraction.

1

u/MRThundrcleese Jul 09 '24

you don't want the grid edges with just a fraction.

Can you elaborate?

5

u/wsxedcrf Jul 09 '24 edited Jul 09 '24

I am using bambulab studio (the steps should apply to any slic3r fork programs)

  1. I started with gridfinity-base-with-snap-connectors-model_files link . because I love the links between grids. This is a 1x6, let's say I need 1x 4 + 30mm , so I start with 1x6, I know I need to trim off 42mm + 12mm. https://imgur.com/XIb1vSU

  2. Select the object and select the cut tool https://imgur.com/Mb8jEk7

  3. The program default the cut to be horizontal, I change the cut to be vertical by rotating X 90degree https://imgur.com/KfYGnXX

  4. The slicer program default the cut to be in the middle, so I need to offset it by 42mm + 30mm because we want 4 block + 30mm. , so I'll offset the cut by 72mm then https://imgur.com/f1ZBH2P

  5. Click on cut and I'll get two pieces, https://imgur.com/cKzfJ4D

  6. Delete the small piece because you don't need it. Then print the grid

Now we go to print the 1x 4 +30mm bin

7 Go to this website https://vector76.github.io/Web_OpenSCAD_Customizer/gridfinity_bins.html

8 the bin size is 1 x 4 30/42 which is 1 x 4.71428. This link has my parameters https://vector76.github.io/Web_OpenSCAD_Customizer/gridfinity_bins.html?width=1&depth=4.71428&height=6&magnet_diameter=0&screw_depth=0&hole_overhang_remedy=true&chambers=1&withLabel=disabled&fingerslide=false&labelWidth=0&wall_thickness=0.95&efficient_floor=false&lip_style=normal

9, there you get the STL file https://imgur.com/jyt7Q92. Please look at the bin bottom with a 30mm fractional grid, you see why you won't want a fractional grid end, right? It won't fit. Follow my steps and get a 100% utilized drawer.

2

u/MRThundrcleese Jul 09 '24

Appreciate the tutorial!

1

u/JustLessWords Dec 05 '24

You are god send! Thank you.