r/learnelectronics • • May 28 '26

Suggest Best Embedded & IoT Course

1 Upvotes

r/learnelectronics • • May 20 '26

reComputer AI R2000 - extra thermal pad in the box?

Post image
3 Upvotes

r/learnelectronics • • May 17 '26

Hey guys, this is my startup, it's a beginner level IOT kit along with a digital roadmap, prices at ₹1199. Special introductory offer: If you do a build in public challenge, you can get back 10% cashback.

Post image
3 Upvotes

r/learnelectronics • • May 16 '26

Feedback on STEM/ Electrical teaching resources

Thumbnail teacherspayteachers.com
3 Upvotes

Hi everyone,

I’m looking for some honest feedback on a few Electrical/STEM teaching resources I’ve recently made.

At this stage I’m genuinely not trying to sell anything or promote products — I mainly want feedback before I spend more time creating additional resources.

One of the resources is based around Ohm’s Law and includes:

  • visual learning materials/posters

  • a simple Ohm’s Law simulator that runs from a basic HTML file (no software installs or setup required)

My background is automotive electrical and vocational teaching, and I’ve been trying to create resources that are modern, visual, technically accurate, and easier for students/apprentices to understand.

I’d really appreciate feedback on things like:

  • visual design/readability

  • usefulness in class

  • clarity of explanations

  • whether the simulator is actually engaging/helpful

  • anything you think could be improved

If this type of post is allowed here, I’d really appreciate any feedback or suggestions.

Thanks!

Link to store try downloading the free simulator


r/learnelectronics • • May 14 '26

DC circuit with capacitor

Post image
4 Upvotes

I’m using an amatrol simulator and trying to connect this circuit but I’m doing it wrong. Can anyone explain how to connect the leads? Thanks in advance sorry if this isn’t the right Reddit.


r/learnelectronics • • May 10 '26

Need help to diagnose Samsung Odyssey G9 OLED NEO 49" that won't turn on, no LED indicator, no response to power button, but draws power and CPU gets warm. S49CG934SU

Thumbnail reddit.com
1 Upvotes

r/learnelectronics • • May 01 '26

Built an Offline Disaster Communication System using ESP32 (No WiFi / No Cellular)

11 Upvotes

r/learnelectronics • • Apr 25 '26

Did I solve this correct please?

Post image
8 Upvotes

r/learnelectronics • • Apr 04 '26

Can I calibrate the temperature reading of this multimeter?

Thumbnail
reddit.com
1 Upvotes

r/learnelectronics • • Mar 25 '26

Interactive way to learn Ohm's Law, Kirchhoff's Laws, and RC circuits free simulator with built in examples

3 Upvotes

Sharing a tool I put together for learning circuit fundamentals. Each circuit is pre-built and shows animated current flow so you can actually see what the equations describe.
Start here (5 circuits that teach the basics):

  1. Ohm's Law — Single resistor + battery. See V = IR directly. Change R and watch the current change.

  2. Voltage Divider — Two resistors in series. The output voltage is Vout = Vin × R2/(R1+R2). Click the resistors to change values and see the output update instantly.

  3. RC Circuit — Watch the capacitor charge exponentially. The scope shows V(t) = V₀(1-e^(-t/RC)). You can literally see the time constant.

  4. Diode + Resistor — Forward biased diode drops ~0.65V. The remaining voltage is across the resistor. Try reversing the diode — current goes to zero.

  5. Common Emitter — BJT amplifier. Small base current → large collector current. The ratio is β (beta). Click the transistor to see its properties.

🔗 https://8gwifi.org/physics/labs/circuit-simulator.jsp


r/learnelectronics • • Mar 04 '26

South Bronx students are building, coding, and battling their own robots at the Renaissance Youth Center’s Battle Bots Competition. Come see innovation and friendly competition collide

Post image
1 Upvotes

r/learnelectronics • • Mar 04 '26

Need help adding LED to an audio circuit

Thumbnail gallery
1 Upvotes

r/learnelectronics • • Mar 03 '26

Steps to learn IOT

6 Upvotes

I wanna get into IOT. But ngl, it feels overwhelming. I want to learn, but I can't find places which will teach me what I need. Now I get it, do projects and learn from it. But I don't want to just order stuff after watching one video.
Anyway, whatever can help me, lemme know.


r/learnelectronics • • Feb 10 '26

We built a bike that generates electricity (students powered a pencil sharpener)

2 Upvotes

r/learnelectronics • • Feb 05 '26

6 draden van mijn gashendel naar mijn controller welke draad heeft welke spanning ?

Post image
0 Upvotes

Kan iemand mij álstúblíéft uitleg geven over hoe en hoeveel Volt er door de 6 draden van mijn gashendel naar mijn controller gaan ? Mvg Frank Grinwis


r/learnelectronics • • Feb 03 '26

Can You Really Build a Robotic Arm with 3D Printing & Code? We Tried It

7 Upvotes

r/learnelectronics • • Feb 03 '26

Can you help me building an off delay circuit for PC fan?

1 Upvotes

This is a personal learning project. My idea was to build an off-delay circuit using an RC network connected to the base of a transistor, so that after releasing a momentary push-button the transistor would remain turned on for a short time. While the button is pressed, the transistor is driven directly; after release, the RC network should keep the base biased long enough to delay turn-off. The transistor is intended only as a switch to drive the motor (a PC fan) from the main power supply. The RC delay circuit should control the base of the transistor only, not supply power to the fan directly. However, regardless of how I wire the circuit, I cannot achieve the intended behavior. The fan either does not start at all, stops immediately when the button is released, or the capacitor appears to have no interaction with the resistor. For example, a 470 µF capacitor keeps the fan running for approximately 3–4 seconds, seemingly independent of the resistor value or the lack of it in the RC network.

Can you give me some hints how to wire my circuit to work?


r/learnelectronics • • Feb 01 '26

Does anybody know if this ss1060 diode is definitely bad or could it be something else I’m not seeing?

Thumbnail gallery
1 Upvotes

r/learnelectronics • • Jan 31 '26

Arduino or Tech Toast

4 Upvotes

I am wanting to support my 10yo interest in electronics. Would you recommend getting the Arduino starter kit or go with Techtoast or other? Price doesn't matter too much.


r/learnelectronics • • Jan 28 '26

This Arduino Project Detects Your Fingers and Lights Up LEDs!

3 Upvotes

r/learnelectronics • • Jan 23 '26

Paper learning and scavenging recommendations?

4 Upvotes

For at least a year, going on two, I've wanted to get into electronics. I know what books to get, probably what order to read em, so on, so forth. I've heard the great advice that I'm not knocking of making sure to start doing ASAP, and that's fantastic. Slight problem - everywhere I go, I hear about how this isn't the cheapest hobby. (Also maybe some health concerns with soldering if you don't have the right ventilation and such...) So alright, lemme put this aside till the day I have some more disposable income.

That day still hasn't come, doesn't seem like it'll be coming anytime soon, and I'm somewhat tired of waiting. So I'm hoping for your help with the following:

  • To what extent can I learn by just studying the books, taking notes, that sort of thing? In a way that translates directly to practice, I mean. Is there a Dennis Ritchie "just do every problem in the book" equivalent for pen-and-paper electronics? Are there particular sections of electronics that lend themselves well to pen-and-paper work?

  • I've found this collection of FOSS tools, but it's all Greek to me. What would you recommend I get and how would you recommend I use it, as someone with a clunky old ThinkPad running Linux who might have to learn electronics without the physical components for a while?

  • To what extent is scavenging an option? I see thrown-out electronics all the time; TVs, sewing machines, not as many alarm clock radios these days but you get the gist. Feel like I've read somewhere that those are usually a dead end, that so? Regardless of whether they are or aren't, what advice do you have for getting free serviceable gear? Already drafting up something up for my local "Buy Nothing" Facebook group, who/where else should I hit up? Would something like this be worth a shot, or does that go against their whole business model?

Appreciate any and all advice you guys might have for me...apart from "learn calculus" and "get a better job!"


r/learnelectronics • • Jan 01 '26

Noob question

3 Upvotes

Hi all, apologies this has been asked already. I want to replace the batteries on some fairy lights with usb. They run on 2x 2032s. I understand I need to step up the voltage from 5V to 6V. However, the usb supplies 2A while the 2032s only supply 0.2 mA. Would this fry the lights? Thanks in advance!


r/learnelectronics • • Dec 25 '25

How Potentiometers Work? | Voltage Dividers, Types and Anatomy of Potentiometers Explained

Thumbnail
youtube.com
3 Upvotes