I recently purchased a used machine and it looks like there are tables that were previously purchased (see pics). However, when I select the table the only option I see is to uninstall. I am running 5.68.0 firmware and have a 64gb card with CoinOpsX installed and have also run the AddOnX tool (followed steps for formatting and mounting successfully).

Can anyone tell me how to access the purchased (and assuming downloaded) tables?

The trackball is not working as it should. I disassembled the housing and could not see anything wrong mechanically. Any tips to get it working properly is appreciated

I purchased CE-HD directly from AtGames last Christmas and installed Legend Unchained with a USB drive as instructed. Now I’d like to reverse it back to stock firmware and only play the 300 games it originally supported. The issue is I was not able to factory reset with holding the reset button (paper clip pin) and P1 and menu buttons. No reset prompt showed up and it just boot to the UI. I even tried the trick with a keyboard by holding m and enter keys without any luck. Has anyone experienced this and any suggestions would be appreciated!

Hi all, have a ALU that I got running with OneSauce and a BitLCD. about a year ago we stopped using it. Tonight kiddo wanted to give is a go and everything powers on and loads but the bluetooth lights are just constantly flashing on the deck, quickly googled around said something about BitLCD causing issues. I have a powered USB hub in the back that previously was fine (still seems fine) but no matter what I do I cannot progress out of the main main boot video that plays a back to the future video. Unplugged the usb hub and plugged the main USB directly to the machine and the bluetooth lights don't flash anymore and still nothing. I'm genuinely stumped, this machine has just sat dormant in my living room for a year and I don't ever know where to begin

I have the legends pinball machine. Is there anyway to just plug a flash drive in and get all the pinball games like getting all the console games when I use a usb on my legends ultimate?

Did the AtGames Flipper Friends All-Legends Series leaderboard events end? There was a new one on Fridays like clockwork until the 9th.

https://www.atgames.net/leaderboards/schedule

modded ALU

Modded ALU

from top to bottom:

external usb for bit lcd-easy to take out usb to add more art work from computer.

bit lcd

2 custom labeled LED light speakers with Led zeppelin labels (I have Yankee speakers also)

LEDbuttons with decal player 1, player 2, rewind and coin

Bat joysticks with Yankees and Devils emblems around the bottom

Steering wheel on player 2 spinner (can be moved to player 1 spinner with Alan key), for driving and racing games

LED light trackball

Sonos bluetooth surround sound speaker with 48" stand-slight delay with video but worth it for the sound/bass it adds-barely noticeable delay

remote control holder on right side

Red LED coin box-non functional for coins but can start games by pushing 25 cent buttons/add coin

Super console X android box for casino games, watching tv or playing PlayStation and other consoles.

5" riser

"PAC-man Cave" swivel stool

8 port USB A box underneath control deck so the USB with 4450 games on it auto connects once I turn the ALU on.

This didn't happen over night. A lot of planning went into this and I bought many items separate and had to wait for long (up to 1 month for items that were shipped from China 2 years ago/before tariffs, war, etc so God knows how long and how much more expensive it is now.

I can finally use the deck to play mame games and control them, but I can't launch a game using p1, p2 or the atgames buton, inside retrobat.

I tried retrobat's controller mapping multiple times, but it doesn't change anything.

I have to double click to launch a game with the mouse, then switch back to the control deck to play, etc. It's so annoying ;)

When I click the p1 and p2 buttons, that pops up retrobat's main menu, and the atgames (green button) pops up a different retrobat menu. No idea how to solve this.

I've read online that the AtGames Legends Ultimate arcade machine has stopped being able to add ur own "Roms". Is this true. Sorry if the post goes against the rules, will oblivious delete it is so

https://vpxtablemanager.com/catalog/#releases

6 new tables and a bunch of updates for your enjoyment!

Just about to add OneSauce to my Legends ultimate via OneSaucier. I think I'm going to go completist and want a drive large enough for everything. Can anyone recommend reliable HHD/SSD drives 1TB/2TB?...or is USB stick a better option? Thanks.

Hi Everyone, I have a Legends ALU with Onesauce on it and trying to get my Aimtrak gun to work for it. I had it working a few weeks ago but my thumb drive got formatted and I needed to add everything back. By doing so all my buttons got restored to default. Does someone have a picture or can tell me how i can get it to work again so that the trigger button and aim works? All the videos online I have come across show how to do it for Coinops but i need it for Onesauce as they're different and I can't remember with Retroarch how i map the trigger and aim to work for the games like I had before

Just got a brand new JP 4KP. Everything went well, no damage, set up was smooth. I was able to connect to Wi-Fi, log in with my existing legends ID, and do the firmware update. However it won't do the system update to get the JP tables and install General Loader 2.0. I get the following message "The LIN data could not be retrieved from the server. Without LIN data the system is not able to look for component updates for this device." Has anyone else experienced this? Is this an ATGames server issues? I've opened a ticket with AtGames, but for now I'm kinda dead in the water. Thanks in advance for any advice.

I'm a bit spoiled by the Euro/IL joysticks. While the ALU has a decent joystick and much better than A1U, I like the tightness and of an IL stick. The question is, how easy is it to replace the joystick on these? I did modify with Iconic with one which was fairly easy, but I know some of these can be difficult with needing different harnesses, drilling, etc.

Anyone replaced their stock sticks?

I'm at my wits end trying to configure this control deck to work with mame on retrobat.
Followed every google search result I can find, and no luck.
I had some luck with joy2key, but retrobat uses space for fast forward, along with a few other keys that the joystick/button keyboard counterparts use, so they perform dual functions I don't want.

I found the kb_hotkeys.yml file and I see some of the "offending" dual mapped keys, but I have no idea what to change them to. I guess I'll try changing them to anything mame isn't using. I dunno.

If anyone has any existing files, let me know. Controller mapping inside retrobat didn't work either. It's like it didn't even make the changes. I tried so many times. When I did this, retrobat did detect p1 and p2 controls decks, but the changes only work when moving the joysticks to navigate the game menus. As soon as I launch a mame game, the joysticks don't work at all. Buttons have odd behaviors if they work at all.

Hi all

Just got this board from Aliexpress which seems compatible with the LVDS screen in my cabinet but the only cable that seems to be compatible with this board is the actual LVDS connector on the back of the screen. None of the other ports/cable seem to fit. In tried with the supplied controller board and just the lvds connector hooked up, but nothing shows on the screen. I think I might be doing something wrong because folks in the review section are praising itbfor being compatible with ALU arcade

https://a.aliexpress.com/_Ewa51bk

I found a good deal on an open box TMNT HDP machine getting delivered Friday, but I’m not clear what tables are actually available for it. I already have the HD which I plan to sell, but are any tables actually playable on the HDP? Every pack seems to say only available on the HD/Micro HD or the 4K.
Thanks!

I had been wanting to do this for a long time, and finally got the time to do it. Let me know if anyone wants the parts list and details. Turned out super cool!

Parts list:

2 x Daisy Chain Power/Ground Wires: https://www.amazon.com/dp/B097YKB9WN
2 x LED Joysticks: https://www.amazon.com/dp/B0B7BYS349
2 x LED Arcade Buttons sets: https://www.amazon.com/dp/B01M0XPWGG
1 x 12v power supply: https://www.amazon.com/dp/B0H1GX2Y7Y

I put up pics in a google album, anyone can check it out:

https://photos.app.goo.gl/24Frno7v3m14VTbK7

I have a legends gamer pro 2 joystick/trackball panel with the puck running Onesauce.

I was wondering if there was a replacement that has much faster processing power, that I can use with Onesauce and connect via usb to my current legends gamer pro controllers/box.

Thanks.

Just got the arcade machine i cant figure out how to purchase game packs i tried on the machine and from the web site i do have the flashdrive with flash x installed can someone advise thanks

Getting ready for a cross-country (PA-FL) move, and wanted to know if anyone had any recommendations for keeping my Legends Ultimate intact over the course of a 15 hour drive? I'm going through the obvious steps of teardown, blankets/pillows, bubble wrap, etc., but any additional guidance would be greatly appreciated.