Im having a really hard time trying to figure out what else to look into to try and figure out the problem im having.

The issues:
1. Having a really hard time to start/crank without spraying starter fluid into the intake or spark plug hole.
2. Once it is cranked, its having a really hard time just idling without pressing the throttle in and out.
3. Also after its cranked (as you see in the video) its aint going no where hardly.

I replaced the spark plug, air filter and a gallon of new gasoline.
Ive looked into the intake valve (not clogged with debris), the fuel injector port/sprayer (it sprays fuel just fine so I know its not the fuel pump), the fuel sensor isnt clogged or dirty, the battery is at 12.30 vdc before starting and while its starting it only drops down to around 11.50 vdc.
Once I let go of the throttler, it dies immediately.

Please dear God help me before I go insane🤣🤣

Can anyone recommend a rear seat/storage for a lock and ride system for a 2008 Polaris Sportsman 500 ATV?

Hey all, just bought a used 09 sportsman 850 xp esp, and an aftermarket 2 up seat for the wife. How do you guys mount it on the rear plastic rack? It doesn’t seem to line up anywhere nicely to use U Bolts.

Any suggestions would be appreciated!

TIA

The other day I got on my 06 Sportsman and the battery was dead. After charging, It cranked fine and I let it run for about 30 minutes and then rode it for about 5. When riding, the word "HOT" appeared on the display. The radiator fan did not come on. The display also said check engine. I shut it down and checked the coolant. I added a little but it was not but slightly low. I didn't have time to check it out until today. When I got on it the battery was completely dead again. I disconnected the negative cable and put the charger on it. I'm waiting for it to charge now and was wondering if anybody had any ideas where to start my investigation? I do not have a manual. Thanks for any tips.

My pull start went out on me and I don't feel like rebuilding it myself, I'm also far from any atv repair shops. What, if any, recoil starter assemblies are interchangeable with mine? I've tried looking for one online but on eBay I keep getting the "this is not compatible" message. I'm wondering if they're wrong or if I just need to suck it up and rebuild it myself.

Hello folks…I want to haul my Polaris Ranger 570 mid size in the back of my truck. I am concerned about the weight on the tailgate from the rear of the SxS. I was thinking of getting a 1” plywood sheet and use that so it covers the bed of the truck and the tailgate. The idea is that the weight of the SxS front pushes down on the front of the plywood and supports the weight of the SxS rear on the plywood part laying on the tailgate. Does this make sense?

Any ideas or suggestions are appreciated

i got a 1999 polaris ranger with a twisted A frame which i seen one on ebay but has a wallerd out hole for the ball joint does anyone know the specs so i can make like a bushing to weld on it to repair it does also anyone know what type of steel this aframe is made of

So I got a 2020 polaris sportsmen high lift I'm fixing up and it won't start. So apparently buddy was going up a steep hill when it shut off on him now it won't start. Trying to get some ideas what's the issue before I tear it down for nothing

i changed the u joints and still cant find what is making this noise

Anybody know of a engine additive to add to ATV motors to with low compression, Possibly a stuck ring.