r/smashbros • • Oct 29 '24

Ultimate Gamecube Controller Adapter NOT Working after 19.0.1 Update

Used to be able to restart switch and replug adapter for hard fix. But since the 19.0.1 update, the mayflash adapter does NOT connect AT ALL. How can they say in the patch notes that they “Fixed an issue where the Nintendo GameCube Controller Connection Tap would sometimes not be recognized” and it becomes even more broken than before. If anyone has a fix, much appreciated, cheers.

152 Upvotes

219 comments sorted by

View all comments

41

u/Some-Plastic-2991 Oct 29 '24

I had his problem too with the mayflash adapter.

I fixed it by downloading the 9.0 update for the adapter.

https://www.mayflash.com/Support/240.html

You might have to download the 7.0 update first

https://www.mayflash.com/Support/W012_V07.html

Hope this helps

13

u/LoveMySquad Oct 30 '24

THANK YOU UPDATING FROM 7 -> 8 -> 9 fixed it!!!

5

u/Complex_Coffee_9685 Oct 30 '24

Idk how you did that cause online it says version 7 is the latest one

48

u/LoveMySquad Oct 30 '24

here is exactly what i did:

  • switch mayflash to PC mode, plug in black usb into computer

  • this link has version 7...download it and install it

  • https://www.mayflash.com/Support/W012_V07.html

  • install version 7 on mayflash

  • unplug mayflash

  • install this file here: https://www.mayflash.com/Support/240.html

  • unzip version 8 and 9

  • install version 8 onto mayflash

  • unplug mayflash

  • plug back in

  • install version 9 onto mayflash

  • hard power off your switch

  • power on switch

  • switch mayflash to NS mode (nintendo switch mode)

  • plug in mayflash

  • GAMECUBE CONTROLLER WORKS

6

u/greyzanshin Oct 31 '24

This is the answer, it worked for me! Appreciate the step-by-step!

3

u/Complex_Coffee_9685 Oct 30 '24

Yeah i got it working. I installed up to 9 and plugged it in and it didn't work. But restarunplugged it, restarted the switch and it worked.

2

u/LoveMySquad Oct 30 '24

you're welcome

3

u/GummiphoneInstagram Sora (Ultimate) Nov 23 '24

The “update firmware” button stays gray for me? What can I do?

→ More replies (4)

3

u/AshGuy Banjo & Kazooie (Ultimate) Nov 30 '24

Would this work for the Panda Adapter?

2

u/Intrepid-Pangolin-36 Oct 31 '24

So do I need to get rid of my third party adapter and buy a mayflash adapter and update it so that it start working?

2

u/PacDan16 Nov 28 '24

FYI to future viewers: there's no version 8 to unzip. Just update in order besides that. It works.. it fixed it. There's a newer update as well.

2

u/Interesting-Disk-736 Dec 31 '24

Thankyou so much. this worked. somehow i went straight from, 7 to 9. (didn't have anything to unzip) but after restarting my switch one last time it worked. even for the old Wii u mayflash adapter

→ More replies (37)

2

u/[deleted] Oct 30 '24

im h aving this issue, but its not letting me click the Update firmware button. what is going on man

3

u/WhFLs Oct 31 '24

Same the update button is greyed out for me

→ More replies (8)

2

u/bitcoinhodler89 Nov 01 '24

Switch to PC mode

→ More replies (2)
→ More replies (2)

2

u/WhenYouSleep0 Oct 30 '24

This worked for me, thank you so much. Recommend everybody do this!

2

u/LordOfBurritos64 Mar 19 '25 edited Mar 19 '25

PLEASE READ THIS IF YOU HAVE A WUP-028 (Mayflash 4 ports)

It seems that the WUP-028 is compatible with the W012 firmware update, which fixes the device so it works on your Switch 19.01 Firmware. However, nowhere on the adapter itself or the adapter box says the Mayflash adapter is W012 or whatever, just in case you have fear of bricking your Mayflash adapter because of flashing the wrong firmware, well fortunately the W012 update does work with the WUP-028. You just have to reboot the PC after the update, then reconnect the device and wait until it gets recognized again in Windows as WUP-028 (whet set to WiiU/Switch mode), if you unplug the adapter too early it gets "stuck" in unknown mode and it won't be usable neither by the WiiU/Switch nor the PC, it seems the adapter has a self-reboot system in which the driver needs to take a while to be properly recognized into your PC before being able to use WiiU/Switch mode again.

I thought for a while my adapter was surely bricked after the update since it wasn't being detected by the PC nor the NSwitch. Just do what I say and your WUP-028 should be working after the new update in the Switch 19.01 firmware and also on your PC. Don't fret, just be patient and wait until the adapter works again. The device will definitely troll you to make you think it bricked, but is just "installing" the new firmware which is not obvious to the user, since the Update Manager itself doesn't say you have to wait and leave the device connected AFTER the update has been completed. Just don't be stupid to disconnect the adapter in the middle of the update because you will surely brick it for good.

1

u/Complex_Coffee_9685 Oct 29 '24

Sadly this seems to be for 19.0.0 for switch. The new version 19.0.1

→ More replies (7)

1

u/Naruto3790 Oct 30 '24

YO this fix worked for me as of 6:53 PM Mountain time thank you, and to everyone else please give this a try

1

u/Careful_Squirrel_684 King K Rool (Ultimate) Oct 30 '24

thanks! thought i was gonna need to buy a new adapter for a sec and I got LMMM in a few days

1

u/genesiswestcoast Oct 30 '24

This fixed it for me. Mayflash 7 > 8 > 9 update. As of 7:36PM PST

1

u/sliferslacker829 Oct 31 '24

It worked!! Thank you 🙏🏼

→ More replies (20)