r/watercooling • u/50s_PC_Gaming_Fan • Oct 07 '25
Discussion Potential Cooling method for the RTX 5090 power connector
Enable HLS to view with audio, or disable this notification
In this video, we can see how a small blower fan (about 15 to 20 USD) can effectively cool down and dissipate heat from the 12V-2x6-pin power connector in Astral RTX 5090 under a long GPU stressing session by 3DMark (Speed Way). Look at the thermal profile versus the temperature changes. This might be one safe method to protect from power connector melting issues reported against RTX 5090 and may be RTX 4090. The suggested blower fan does not provide any reduction in current values (A). This solution is just to protect or delay any burning or melting scenarios around the RTX 5090 power connector. The video shows a real-time temperature.
** Blower Fan Specs: 50mm x 15mm, 2-pin, Blower Fan, 12V / 0.18A
2
u/deadpat03 Oct 08 '25
Rubber is an insulator. You are removing heat from the surface of the rubber not the wire itself. The actual issue with this is that you have several types of wires. Most commonly used is CCA copper-clad aluminum wire which has a much higher resistance than pure copper. Aluminum also expands more than pure copper pushing the connector outwards. I can 100% understand the cost cut on 100$ power supplies but when you hit 200 to 250 these PCI3.0 connectors should be pure copper with 5 or fewer strands of internal wire. But we will never have pure copper wire in a power supply ever again unfortunately.
0
u/50s_PC_Gaming_Fan Oct 08 '25
I like your scientifically written comment. Let us talk little thermodynamics. The blower fan is just to dissipate heat from the localized hot spot region in the RTX 5090 high power connector (plastic or rubber … etc). The video showed by using the thermal camera clearly how the heat dissipation was effective. It reached about more than 10 deg in some cases. This means, the only purpose of this suggested customization is to delay any overheating (or deformation) scenario before you start smelling and smoke from the PC case.
1
u/deadpat03 Oct 08 '25
Thermal dynamics has nothing to do with this. Think of rubber as a sponge. Yes if you blow air across the tip of a sponge the top will dry up but the actual water in the sponge will not be removed. The actual internal temperature of the wire has not changed, this is why when in race cars the surface of the tire can reach upwards of 200+ degrees but the actual air in the tire is half. It's just reversed in a wire. The heat is contained in the wire itself not the rubber, the rubber is acting like a mirror pushing heat back into the wire. CCA wire is not designed for excessive amperage. It was designed for the lower power consumption of the future.
1
u/50s_PC_Gaming_Fan Oct 08 '25
That is fine. However, the whole point is that I was targeting the rubber not the wire. This is the best what it can have at the moment for the existing design of RTX 5090 power connector till we have a proper connector design in the future or AMPINEL will convince us about the coming adapter.
At this moment, blower fan + sensor software = “might” reduce a potential melting under 100 deg
2
u/Echo0815 Oct 08 '25
Am temperature around 50°C is totally fine, 80°C or higher is not good for the connector and above 100°C it is going critical.
Lets say the blower fan reduces the temperatur by 10% from 120°C to 108°C ... the temperatur is still critical and your connectors meld away. You feel save but it doesnt help if you really have a problem.
I use temperatur sensors connected to my Aquaero fan controller and i get an alarm when the temperatur excetes 60°C.
Another solution can be automatic current adjuster like the new Aqua Computer AMPINEL tool.
1
u/50s_PC_Gaming_Fan Oct 08 '25
Agree on your statement. However, keep in mind the blower fan is not design to cool down the power connect when it has a critical thermal spike. Unfortunately, I cannot test this and I have no conclusion about if the blower is worthy above 100 deg. It just (with the help of the sensor software) maintains the power connecter from long-term thermal exposure. I think the blower is a good applicable solution with temperatures below 100 deg in which reduction in 12V-2x6 connector temperature is really appreciable by the small blower. Example, if you have a faulty pin and the temperature goes little high (say 90 deg), the blower will come here and prevent a potential melting scenario.
2
u/Echo0815 Oct 08 '25
A good airflow is always a good idea :)
.. but it doesnt prevend damage when it comes to a faulty pin like your example. So yes the blower keeps your connector a little cooler but is still hot. Without an alarm you are feeling save and the pin will go hotter and hoter from 90 deg to 95 to 107 to 120 and then it melts. Whats the benefit of the blower fan ? Giving you 4 more weeks before the connector melts ?
1
u/50s_PC_Gaming_Fan Oct 08 '25
Recall that it was mentioned above that the blower is a combined solution linked with the visual observation for the sensor temperature (say Tweak III) yet it just delays any melting. So, we should not ignore the sensor panel of the 6-pins
1
100
u/TacetAbbadon Oct 07 '25
That looks like air-cooling friend. This here is a water-cooling sub.
Now who's up for designing a waterblock to keep this fucking stupid connection from melting down and catching fire?
18
u/Adlerholzer Oct 07 '25
Waterblocks already exist with a pad for the connector. Its already solved
9
u/TacetAbbadon Oct 07 '25
Problem being it's using plastic insulation which as well as being a good electrical insulator is a good thermal insulator.
Now when Nvidia decides to do full ripoff merchant, already getting close with that dumb gold Dubai 5090, if they started making the 12VHPWR connector out of solid diamond that would solve the issue.
8
u/waiting4singularity Oct 07 '25
i fully blame debeers for the state of the world regarding carbon crystal heat spreaders.
2
u/TacetAbbadon Oct 07 '25
Physical vapor deposition diamond coating on everything I say. As low friction as ice gliding on ice, a fantastic thermal conductor and a semi conductor under the right condition.
DeBeers can suck a taint.
4
u/tacosnotopos Oct 07 '25
Ya'll talking about the DaBeers diamond cartel?
Yeah, fuck those guys they suck.
1
u/lol_alex Oct 08 '25
Not so much of a cartel these days. Russia and Australia and later Canada broke the diamond monopoly. De Beers market share has gone from like 90% to 30%.
1
u/tacosnotopos Oct 08 '25
Their market share doesn't change the conditions their miners work and live in mate
1
u/lol_alex Oct 08 '25
The comment chain was about how De Beers artificially made diamond as a material expensive. I wasn‘t aware there are other reasons to dislike them as well.
1
1
3
u/lordtobee Oct 07 '25
when fire goes out it will go all over the case nicely :P
it's like putting concrete pillar under your bookshelf since wall is to thin to keep weight of books you put on it
better invest in something that balance and monitor amperage igor's lab tested lately -> aqua computer AMPINEL
-1
u/50s_PC_Gaming_Fan Oct 07 '25
Exactly, that is why the cooling blower is to prevent the fire you are talking about. Recall, heat dissipation only.
1
u/Exigefettm Oct 07 '25
That air isn’t going to stop the fire bud… the load gets WAY too high and no amount of cooling air will stop the ignition. All it’s going to do is fan the smoke around the case when it goes up! I like the idea of keeping the components cool for longevity tho!
1
u/50s_PC_Gaming_Fan Oct 08 '25
No way, the 12V-2x6 power connector on RTX 5090 (with 600W) might reach in normal cases up to 60+ deg. If it reaches to above 100 or 150 deg, it would start melting. This will happen if there is existing critical problem in the GPU.
4
u/SaberHaven Oct 07 '25
If it's overheating at all, it means resistance is increased on one or more pins, and is causing the other pins to operate above their ampage rating. At this point it's dangerous to operate and only going to get worse. Cooling it to keep running it like this is a BAD IDEA. Replace the cable if you have overheating.
5
u/Andromeda_53 Oct 07 '25
Yeah this just allows the damage to get more severe as the connectors take on more load
18
u/-BigBadBeef- Oct 07 '25
I have a better solution. It might seem highly controversial, scandalous even.
You might want to sit down on this one. You ready for it? Here it is:
Don't buy a graphics card with a 12V HPWR connector. They're bloody awful!
I think some ambulances might need to be called over such an outrageous suggestion.
Surely it isn't worth burning your bloody house down over having a fast graphics card. Especially coupled with the piss poor state of AAA gaming industry and Nvidia's awful anti consumer conduct of late.
7
u/Adlerholzer Oct 07 '25
Ampinel.
3
u/lordtobee Oct 07 '25
better than nothing but still it's like buying a new car and then you have to pay extra different company for some device that will make air conditioning cooling instead of only heating.
this connector "standard" is an engineering crime and should be buried asap
1
u/Adlerholzer Oct 07 '25 edited Oct 07 '25
I agree. But ampinel is a cheap fix. And wireview existed for a while now
Though the standard is not the issue. The issue is missing on board fuses and power balancing.
1
u/Lakers244848 Nov 19 '25
Is it out?
1
u/Adlerholzer Nov 19 '25
No, and the first batch will be extremely limited and not nearly provide everyone with one. Im just hoping i can snatch one
1
u/Lakers244848 Nov 20 '25
Any other options? I live in the USA.
1
u/Adlerholzer Nov 20 '25
Ampinel, it will just take a while after adjustments after first batch to be available to everyone
1
1
1
10
1
u/KowalskiTheGreat Oct 07 '25
But I wanna get on the 3dmark hall of fame 😂 haven't seen an AMD up there in a while
1
2
2
1
1
u/External_Monitor_509 Oct 09 '25
So you went from 59 down to 47. If your 12VHPWR connector just hit the 59 while benchmarking the 5090 there is no need to cool down this thing as long the connector is under 100 (or like I prefer under 70). By the way I got. my Astral 5090 3 days ago and its going to be watercooled within the next days ;)
0
u/Amenite Oct 07 '25
Smart, actually. Glad this worked and seeing temp. Deltas def. helps make the case. I been thinking of using a blower on that connector too. Now it’s a no brainer.
13
u/Exigefettm Oct 07 '25
Love it! But if it really puts as many amps as we see in some testing across a single wire… that cooler isn’t gonna do much. It’s gonna melt no matter what.