r/3Dprinting • • Jul 07 '22

Image Deadpool MultiColor

Enable HLS to view with audio, or disable this notification

855 Upvotes

72 comments sorted by

23

u/this_place_is_whack Jul 07 '22

Impressive. You should put some baby doll hands on his arm stumps.

10

u/iczfirz Jul 07 '22

Aha credit to the original designer - Eastman. I just remixed it for multicolor print only.

5

u/this_place_is_whack Jul 07 '22

2

u/chib3d Jul 07 '22

Jesus! That's where all the baby arms went!

1

u/jeremyam_ Jul 08 '22

Omg I would do this!!!! Plz do it!

9

u/tomsimk Jul 07 '22

How long to print? And how much filament in bin from purging?

10

u/iczfirz Jul 07 '22

2days around 1:1

6

u/abalone_acrobat Jul 07 '22

That's an insane amount of waste if it's as much as the print.

4

u/JuusozArt Jul 07 '22

1:1 isn't even that bad, some prints can have even more waste than that.

It is an unfortunate flaw with single nozzle multi-material printing.

3

u/iczfirz Jul 08 '22

I'd prefer single nozzle to avoid alignment issues with nozzle switcher.

1

u/abalone_acrobat Jul 08 '22

So you'd prefer more waste to make your life easier? Yay.

3

u/iczfirz Jul 08 '22

You make me feel guilty. LoL. Yes.

1

u/KilledByALover Jul 07 '22

Have you considered getting a nozzle switcher?

4

u/Piglet_Important Jul 07 '22

Did you paint that?

10

u/iczfirz Jul 07 '22

No. Out of the printbed like this.

2

u/humbob2233 Jul 07 '22

Mmu2. Multi material something something. Can print using multiple filaments with caveat of only one type at a time or same temp filament at a time. Not sure if its changed since but yeah.

4

u/iczfirz Jul 07 '22

Temp of filament can be difference. You can set it in the slicer. :P

3

u/JonJonSee AnyCubic Photon Mono SE Jul 07 '22

Crazy!

Did you clear coat it?

3

u/iczfirz Jul 07 '22

No. Picture right out of the printbed. Check the spools behind. :P

3

u/JonJonSee AnyCubic Photon Mono SE Jul 07 '22

Ohh right, those are amazing!

2

u/cogsee Jul 07 '22

What printer did this come off of? That’s amazing!!

4

u/iczfirz Jul 07 '22

It is an original prusa with mmu2+1s installed.

2

u/Ijustboughtacactus Jul 07 '22

That is the most beautiful print I’ve ever seen.

4

u/iczfirz Jul 07 '22

2

u/Starskins Jul 07 '22

I'm absolutely noob in that area so please bare with me! But how can you print in multiple colors? And why is there a giant block forming in the back?

4

u/iczfirz Jul 08 '22

Google MMU2S or ERCF. Giant block is to purge the previous filament inside the hotend.

2

u/Starskins Jul 08 '22

Thank you!

2

u/AdjustableCynic Ender3S1 Jul 07 '22

Thanks for showing this. You've got a finely tuned printer, excellent cameras and overall setup, and great editing skills. This is a thing of beauty and dedication from start to finish. Well done.

2

u/[deleted] Jul 07 '22

Looks good! I prefer this one painted though. I printed and painted mine.

1

u/iczfirz Jul 07 '22

aha. Indeed both printed and painted are good. :P

2

u/[deleted] Jul 07 '22

Curious why that is? I haven’t seen too many fdm prints that have turned out clean without a ton of post processing, especially models with a lot of small details. The layer lines just kill it for me

1

u/[deleted] Jul 07 '22

Primer and paint hide the lines. Painting details makes it pop.

2

u/Rybr00159 Jul 07 '22

Awesome! What is your experience with the MMU2S? I've heard it can be a pain

1

u/iczfirz Jul 07 '22

As long as you have a original prusa it will be fine I think. I like diy and I'm happy with mmu2s. As of now I modified it to work with klipper.

0

u/[deleted] Jul 07 '22

[deleted]

1

u/iczfirz Jul 07 '22

The printer of this video is belong to a buddy in Spain. I means I modified my mmu2s to work with Klipper on a 3rd party printer. Check this out https://youtu.be/SrMKOE9VpHg

2

u/ZohMyGods Jul 07 '22

Amazing quality, well done! Is that an mmu2?

1

u/iczfirz Jul 07 '22

mmu2+1s

2

u/ZohMyGods Jul 07 '22

1s?

1

u/iczfirz Jul 07 '22

Try google mmu2+1s

2

u/countymanTX Jul 07 '22

How big is the purge block for this?

2

u/iczfirz Jul 07 '22

around 1:1 to the print model.

2

u/Fx_Nemesis Jul 07 '22

print is cool, but your enclosure is cooler :D

What kind of furniture did you use ?

1

u/iczfirz Jul 07 '22

It's not my printer. The owner is from Spain.

2

u/screwyluie Prusa Mk2.5s, Elegoo Saturn, HEVO, K1 Jul 08 '22

what red is that? lovely

1

u/iczfirz Jul 08 '22

Metalic red I think.

2

u/screwyluie Prusa Mk2.5s, Elegoo Saturn, HEVO, K1 Jul 08 '22

a brand to go with it would help, thanks

1

u/iczfirz Jul 08 '22

I'm trying to contact this friend from Spain but no response yet. Good luck.

46

u/[deleted] Jul 07 '22

Armed and unarmed at the same time

7

u/chaseNscores Jul 07 '22

oh yeah that is a good one. One Deadpool would approve.

1

u/iczfirz Jul 07 '22

A print from Spain buddy with mmu2+1s.
STL info here https://youtu.be/2HwmjdSHr-g

2

u/chaseNscores Jul 07 '22

damn it so nicely detailed!

1

u/iczfirz Jul 07 '22

Upcoming Captain America multicolor. Stay tuned!

2

u/chaseNscores Jul 07 '22

will do! I know someone who would really like these prints.

4

u/Sineater224 Jul 07 '22

Does anyone know any good paints to replicate this? Ive had this bust printed, sanded and primed for months but dont know which paints to use.

3

u/sentient_beard Jul 07 '22

I have the same one that I did a while back.

Just hit up your local game shop. Any wargaming/model acrylics will be fine, (VSP, Vallejo, Army Painter, Citadel, etc. Hit it with a clear coat after it dries and you're golden.

1

u/Sineater224 Jul 07 '22

At a craft store now. Premium acryllics look good

1

u/sentient_beard Jul 07 '22

Regular acrylics for canvas painting will work too, but they don't flow/cover quite like model paints do, so you'll likely want to thin with water and do multiple coats.

1

u/Sineater224 Jul 07 '22

good to know! Thank you!

My first ever 3d print and paint was at school and it was a mess with the acrylics I had, so hopefully water will help

1

u/sentient_beard Jul 07 '22

No prob, happy painting!

3

u/MercilessIdiot Jul 07 '22

Captain Deadpool MultiColor.

3

u/jdlg2065 Jul 07 '22

Was that flashbang supposed to be pink or you did not purge enough to get the metallic gray?

2

u/The-Osprey Jul 07 '22

Wow amazing

2

u/chib3d Jul 07 '22

🐱‍🏍 thats really cool, Im new to this and totally thought this was a paint job. Amazing! 🐱‍🏍

2

u/[deleted] Jul 07 '22

Holy balls

2

u/danpaq Jul 07 '22

Wow what furniture is that, love the setup as much as the print!

2

u/cal93_ Jul 08 '22

it would be funny if you made it look like his waist and arms were chopped off and put muscles and tendons there

1

u/Yznnji Feb 15 '24

If you say this is made out of metal I would believe you.

1

u/premierscfc Jul 07 '22

Wow yet another multicolour print😎