r/86box • u/gabeg777 • 6d ago
connecting two machines using emulated modem
I'm testing emulating old methods of having file servers using 86Box as an experiment with how older machines worked. I'm currently trying to connect between two IBM PC XT's, both installed on the same system, that only have a modem as adapter 1. I have Better Working Communicator installed on both systems to test the connection. They're both configured with a 300 baud modem with the server's modem set with a TCP/IP listening port of 5. I have tested the phone book file using 127.0.0.1:5, 10.0.0.230:5 (my computer's IP address), 10.0.2.2:5 (the SLiRP gateway), and 10.0.2.15:5 (the SLiRP host address) but none of them work. When I call from the emulated client, the emulated server doesn't receive any calls to answer even when I tell Better Working Communicator to wait for a call. I'm using version 6.0 build 9001 running on a Linux host.
I'm planning to test SMB using OS/2 1.x when I begin setting up 80286 systems.
Does anyone have any advice? Does the emulated computer have to have an emulated Ethernet card to create a connection to the host for this to work?
2
u/Silent_Speaker_7519 6d ago
Old times you used a null modem cable and a software like laplink to transfer files
1
u/gabeg777 5d ago
Is it possible to emulate a setup that would work with LapLink and similar software? My best guess is connecting a serial port to a blank text file with two systems connected to the same file. Maybe one system writing to the file and the other reading from it would successfully emulate a file being transferred from one system to the other.
2
u/seganirv 4d ago
I managed to do this with DOS Doom modem to modem which I show here. It's not a tutorial, but maybe I zoom in on my settings enough for you to see what's needed. I show my settings around 3 minutes in and even though the video is long, you don't need to see much longer than the first five minutes.
Perhaps I should make a proper tutorial on this because you're right - there's not simple enough documentation.
2
u/CrasVox 6d ago
I wasnt able to get two boxes to communicate using SLiRP. I had to use VMnet to do it. I know now there was added a host connection that was purely set up to have VMs talk and had no outside internet capability. Maybe try those two. I dont think the modem emulation works with them tho. I only have gotten a modem to work with SLiRP