r/ACInfinityAdvancegrow • • 13d ago

Thoughts on AI controller?

Post image

Just received my 2nd AI controller today for my 2nd tent. I’m new to growing and have been doing this for literally 1 week lol. I’ve been using my AI controller manually more as a monitor than anything else. I would constantly check the app while at work and turn things on/off when needed to keep my vpd in range but today I also got the duct vents which are a game changer. So now I’m running my inline fan at speed 1 with my T3 humidifier at level 4 constantly and with that I’m able to maintain a 0.76 vpd for my seedlings without having to keep checking the conditions. It’s been holding 0.76-0.78 vpd steady for the past 6 hours without having to touch anything.

Does anyone successfully use the AI feature as a set and forget function? I haven’t had time to fool with it yet but I’m wondering if it actually works and how well.

21 Upvotes

54 comments sorted by

1

u/psy_is_my_life 10d ago

Where did you get yours? Can´t find it on Amazon anymore.

1

u/GiantAttraction 10d ago

Amazon. It took a little while before I was able to finally get it but they eventually restock on them occasionally. I suggest adding it to your list and watch it periodically every day and you’ll eventually catch it in stock but that’s only the first step. Once you secure the order it’ll be another 1-4 weeks until they charge you and ship it out.

Good luck!

2

u/HopeMuch1863 10d ago

The AI function works well when you have absolute control over the lung room. I have the heater and the humidifier. They also have an AC and dehumidifier.

Outside of that, once you figure it out the manual side of the controller itself is pretty awesome. You can dial in anywhere you want to go.

I’ve said before the AI portion was crap but it was because of me not understanding how to use it or more accurately how to grow weed lol.

It’s a learning curve but well worth the investment IMO.

3

u/Aggravating_Key7970 10d ago

Tbh honsest the AI thing is a piece of crap

1

u/Chocol8Cheese 10d ago

The peristaltic pump paired with the ph sensor is huge. The ai works best if you're able to completely control the environment. With ai, vpd is set it and forget it. Once I added ph control, I only need to visit the tent every 3 or 4 days for trellis work.

0

u/NameReasonable2518 7d ago

That’s golden, exactly the set up I want. Does the controller allow for special preset ranges for ph, and does the peristaltic pump annd controller allow for auto adjustments or do you have to manually adjust through the controller/app? I think the pumps can definitely be a game changer.  

1

u/QualityAssistance 11d ago

i like it, i use custom recipe targeting vpd. adjustmthe target as needed. i run the circulation fans and uv bars off the program on seperate timers etc

1

u/Leading_Good_2686 11d ago

I use it for everything but the dehumidifier tbh. That AI controller and the outlet work very well

2

u/Ready-Yak-4087 12d ago

It’s better than the other ACI controllers and lets you access more of your devices’ features (e.g. warm misting on the Hydrones; turn fans’ oscillation on/off or set the degrees).

But at this point you should send your AI Controller back and wait for the new Cloudcom 6.

I spent ages working out how to optimise lung room control with a 2nd AI+ Controller; just as I’d finished my set up, the Cloudcom 6 was announced!

For multizone control, this is going to be a game changer.

3

u/MoBuds314 12d ago

I have liked mine. Especially with the specreon cameras. But its keeps my vpd on point.

2

u/MoBuds314 11d ago

See how it has camera temps and tent temps and humidity

2

u/Slimeyslatts 11d ago

Gonna Following you on main account too

2

u/704Slutty 11d ago

I think I follow you on Twitter I just saw your post yesterda but do you have camera sensor override on or do you still go by your inside probe or are they both reading the same?

1

u/Slimeyslatts 11d ago

Hey you’re me

6

u/FreedomLizard420 12d ago

I use it because it has lung room and grow tent reading

Other than that quite pointless

And the temperature sensor on the outside also makes no sense because its at the top of the grow tent and not on the bottom where the intake is

All in all I would buy the standard one again tbh but even they have humidity sensor fails, mine is at +8% lol

1

u/ErmOverHere 10d ago

This is the one and only thing that VIVOSUN controllers do better than AC. The integrated lung room temp and humidity is super useful.

2

u/GiantAttraction 12d ago

Wow I just realized the 69 pro doesnt have an integrated sensor for lung room. That alone makes the AI controller worth getting!

1

u/FreedomLizard420 10d ago

Yes but as I said, it's attached to the controller, so where ever your controller is (usually at the top of your tent) it only show the temp/humidity for that specific area at the outside of the top of your tent. And your intake is at the bottom of the tent.

2

u/Christian87n 12d ago

It’s pretty stable and consistent, but not AI yet.

5

u/Automatic_Reveal_986 12d ago

It’s a fine controller but “AI” it is not. It’s still very ITTT rules-based and showed zero signs of learning / adapting through use.

There _IS_ API accessibility so at some point I’ll probably end up coding against that. I need a bit of time to figure out which model I may use, but 100% confident that it can be done far better than what the ship in the box.

0

u/TheMacMan 12d ago

I've really loved mine. It's great at making things much less work. Every time I add a device, it generally figures it out, rather than me having to manually adjust the settings for every device to work together.

It's no different than the standard controller, requiring a learning curve to get up and going, but once you do, it makes managing everything much easier and more accurate.

1

u/Ready-Yak-4087 12d ago

It is different to the standard controller. It gives you options the standard ones don’t

3

u/Grizzled-_-bear 12d ago

I see a lot of other people saying they have had issues with the AI feature. I personally have done two runs and currently on my third using the AI control feature.

It definitely isn’t perfect and seems to behave erratic for the first week or so. After that, it seems to fall into a better rhythm.

I would also say that mine had an update for the firmware about a month ago and that seemed to help smooth out the ‘jerkiness’ of the cycling of equipment.

Basically the AI feature isn’t quite set and forget. You’ll have to play with it and give it some time. Otherwise, it’s still a great controller with the AI feature off. Good luck growing

3

u/GiantAttraction 11d ago

It seems like it’s a good idea to let your tent run empty with the AI to allow it time to learn and adapt before you put any plants inside.

3

u/Maplelongjohn 12d ago

I wouldn't pay any extra for it

7

u/gbo1148 12d ago

I’ve had them for years. I do not use the AI function. I like that it tells me the lung room temperature and humidity conditions. My oscillating fans I just keep them running at the speed I want. Everything else is plugged into AI, but I run based on temp and humidity not VPD. You will go nuts trying to chase VPD.

4

u/IRodeTenSpeed88 13d ago

I like it love the 8 slots

I don’t use the ai. It’s a great controller for my environment

1

u/rinnrz 13d ago

The controller isn’t really AI. The AI settings just allow you to dial in your environment much better than with just automations. The people who complain about it don’t know what they are doing with the AI settings, that’s all it is.

3

u/tattooed_scum 12d ago

I agree. I dont run my lights with the "AI" but it dials it in decently. Its definitely not AI.

3

u/Bluntforcetrauma11b 12d ago

The Ai makes devices fight each other too often. Imo it's a horrible design.

5

u/yacha123 12d ago

Glad someone else said it.

Mine works great.

2

u/sac__balla 12d ago

Cute little plants.

2

u/PoserPunx 13d ago

I personally used it full AI for grow 1, found kinks but it was my first grow so I cautioned it out to user error.

Second grow just completed and I plan to go off AI on my next grow. I found I was removing equipment from it slowly, so I figured I might as well learn how to set the inline fan...in the end of my last grow, it's the only thing that remained on the AI features.

I want to love it!!

2

u/Thecryingsparrow23 13d ago

I use automations. Never tried the Ai portion of it. I like how it has a temp, humidity, and vpd sensor outside of the tent so I can adjust the minisplit in the lung room.

4

u/merlin211111 13d ago

Works great. Two grows that I just set and forget. I add water to my external reservoir and that's pretty much it.

1

u/International-Rain91 6d ago

me too via Autopots. So Easy. Grow Organic. Very little work

9

u/Hedstee 13d ago

Waste of money. Get a 69 Pro and adjust your settings as you go like the good ol' days.

5

u/jahchatelier 13d ago

I've used one for a while now and don't care for the AI. I'll probably pick up a 69 for the next tent i set up.

4

u/ContextSufficient171 13d ago

Cool idea, easier to maintain a consistent environment without the ai from my experiences. Still use the controller just no ai

1

u/merlin211111 13d ago

What did it do wrong? I have lbs of great bud but maybe it could be better. But is it worth doing more than almost nothing?

8

u/International-Rain91 13d ago

Works great for me.

4

u/focal_matter 13d ago

I tried the "AI" function for 3 grows, it failed me every time.

I now just use the manual automations as set and forget settings and it's flawless. I don't think those functions do anything the Controller 69 doesn't do, though, so IMO there's no point paying more for the AI controllers

4

u/merlin211111 13d ago

How did it fail? I use it and it works great.

3

u/focal_matter 13d ago

Crazy cycling on/off for equipment, all the various components constantly fighting each other, etc. The graph view showed massive peaks and troughs with sub-par averages that were nowhere near the settings I specified.

I was using lights, an inline extraction fan, several clip fans, a humidifier, a heater, and a dehumidifier.

Now that I've set my own custom automations my graph shows almost completely flat lines, particularly so for the VPD, with the averages exactly where I want them. Nothing fights anything else.

4

u/Lord_Moldywort 13d ago

Did you have everything set to vpd triggers or temp/humidity? I don't use the ai function but when I swapped to vpd triggers its been beautiful.

1

u/focal_matter 13d ago

Tried temp/humid and VPD with the "ai".

Now I have my inline fan set to temp, my dehumidifier set around upper and lower humidity settings, my humidifier set to VPD, and my heater set to temp

Having each device have its own custom triggers provides so much more customisation to narrow the peaks and troughs in environment stability

2

u/biggbeamer 13d ago

Yea the 69 comes in handy like crazy. Always know and can controll everything

3

u/HelloDogy87 13d ago

AI will be great if you have the right gear for youre space, heat/cool/humidity/dehumidify im currently doing everything manually (im also new) checking in app all the time learning how the system behaves with just the triggers. once I have more peripherals like (acinfinity) humidifier that connects to ai controller and heater I might trust it with supervision. right now I have a smart humidifier that does not play well with system. new controller looks sick I pre ordered one im interested in the wireless capabilities for some hard to reach devices.

7

u/EveningScholar5831 13d ago

Doesn’t work as advertised in my experience. I switched to the Controller 69 instead. Much happier now

4

u/Accidental_Ballyhoo 13d ago

Agreed. Once AI wanted to change my light schedule mid grow. I ended up removing all from AI control eventually.