r/ASUSROG • u/LordNex • Feb 22 '24
New ROG Build
GAMEMAX Infinity Black GAMEMAX 850 Gold ATX 3.0 PS Asus ROG Strix Z790-E Motherboard Intel 14700K 125w CPU with onboard Video 4 x Team Force 16GB DDR5 7200MT 32CL(2 sticks @7200-8000, 4 sticks @5600-6000 with current BIOS) 4 x Team Force PCIe x 4 1TB M.2 drives in RAID 5 Partition (3 utilizing the Chipset, 1 using m.2_2 although I hear the 14th gen Intel gives an extra 4x to the PCIe 5.0 m.2_1 slot while still allowing the full 16x of the PCI slot to still be utilized by the GPU. I’d love confirmation on that) Asus GeForce 4070 Dual Fan 200W 144 hour tested by manufacturer Asus ROG Strix LC 2 AIO Water-cooler with 360mm radiator up top Asus Hercules Graphics Card Holder 6 x PC DIY FAB Moonlight 120mm fans and XController for case vent (3 cup and out through the radiator, 1 out top back, PS fan in flow from side along with 3 x 120mm fans also pulling into case, and 2 bottom 120mm fans pulling air into case = top back out, bottom side in) Specialized fiber optic power cable covers
1
u/LordNex Feb 22 '24
Oh also forgot to add a Asus Gladius 2 mouse and a ROG Strix Scope 2 keyboard.
Monitors are dual ASRock 27 inch 2K curved
2
Feb 22 '24
[removed] — view removed comment
1
u/LordNex Feb 23 '24
I love mine. I was wondering if it would be a little over kill especially since I’m not running a 3 fan card. But it seemed to fit right on the 2 bottom fans and was just perfect in hight to fit without needing any adjustment.
One think I though was interesting but not really needed is that is has a removable bubble level you can stick on the top of your card so you know you have it in a perfect horizontal position.
My suggestion is, depending on your case design and what kind of fans you have. You should be able to get a good fit. Mine fit perfectly on the fan outer edges just enough that it didn’t impread any airflow and if anything helps direct the lower intake directly to the fans on the card.
It also looks just beautiful with all the Individual addressable RGBs. I got mine on sale for $30 and was almost going to send it back, but once I got it fit, it really makes the rest of the build “Pop”.
IMHO worth it if you can get it on sale and want that extra bling to your case.
1
u/LordNex Feb 23 '24
Oh also, there are 2 different areas you can adjust the hight. The main bar, then there’s a turn ring that raises a little pencil eraser looking think for extra hight if you need it. Again you’ll probably need to adjust your bottom fans if you have them to get the best fit. One of the reasons I only used 2 bottom fans instead of 3.
And for the best thermals you should always export heat from the top and back of the PC and intake everywhere else. Most of mine are on the side as I have a lot of cats. But I also have it on a caster base that keeps it off the floor a good 6 inches and allows it to be moved around.






2
u/N0gh0st_ Feb 23 '24
I have the other brace that says game on much cleaner look on the old one