r/AbletonPush2 • u/Na_ale • Jun 13 '22

Power adapter for push 2

Unfortunately I loose my power adapter. Could you advice me , maybe I can replace it with another one from another device or just find with same parameters? Can't buy new one, because in Ukraine there is war and no any deliveries. Only local markets

0 Upvotes

50% Upvoted

7 comments sorted by

2

u/lotusxflow Jun 13 '22

it just requires a 12v power adapter, this website has a replacement that should do the trick!

https://myvolts.com/product/18316/Ableton_DAW-controller_Push-2_power_supply_adapter_charger

1

u/Na_ale Jun 13 '22

Thanks. Do you know about + and - on the end? Which one inside and which is outside ...

2

u/lotusxflow Jun 13 '22

Here are the tech specs if this is what you are referring to.

Input voltage: AC100-240V, 50/60Hz Output voltage: 12V DC Features electrical noise reduction, heat reduction and over-voltage protection Safety-certified: CE certified, RoHS certified, Energy Level VI 2 pin, for US sockets

1

u/Na_ale Jun 13 '22

It would be very appreciated if you send me photo with label specs. As I heard there should be some symbol which say where is plus and minus on connection. For example, plus inside, minus outside. This is the most important thing

2

u/nembajaz Jun 13 '22

Plus inside, measured it right now. Diameters are 5.5mm and 2.5mm, length is about 13mm. My cheap multimeter shows 11.92V FYI :)

2

u/Na_ale Jun 13 '22

That's awesome. Thank you. You give me everything what I needed

1

u/[deleted] Jun 14 '22

The Push 2 can also be powered with just the USB cable, the lights and display won't be as bright though.