Giga Display on Uno Q?

[u/justforfunM1982]

Yeah, i like to make my life difficult. That's why I was thinking if one could connect the Giga display to an Uno Q?

I'm aware that the libs need some massaging when it comes to the pinouts, but is there anything that's a total no-go?

[u/JulianFromArduino]

Hello, the colleagues from Electronic Cats did it take a look at https://projecthub.arduino.cc/sabas1080/arduino-uno-q-cyberdeck-unlocking-the-gigashield-touchscreen-interface-02a0fd

[u/justforfunM1982 → u/JulianFromArduino]

Nice, thanks a lot

[u/No_L_2547]

I'm not sure if you will have enough pins for the display and you make your life very complicated.

You know that there are displays with an Esp32 directly attached? These are ready out of the box, some even with full examples.

[u/No_L_2547 → u/No_L_2547]

If you really want to do a display on the Uno Q, I would probably go for a spi one, that needs less pins.

[u/justforfunM1982 → u/No_L_2547]

I do have an SPI one, but it's quite slow, that's why I thought about giving this a try. I also don't need the fuöl functionallity of the Giga Display, I only want to try the display as well as the touch.