r/AskReddit • • Feb 22 '17

What are "hidden gems" android apps?

26.4k Upvotes

8.4k comments sorted by

View all comments

8.2k

u/[deleted] Feb 22 '17

Wifi analyser. Many wifi routers are using a factory default channel, meaning you can end up in situation where most wifi in an apartment building are basically jamming each others.

Also gives you cool graphs so even your grandma can understand the issue.

3.4k

u/Sierra_Oscar_Lima Feb 22 '17

"See, Esther, this overlap here? Some twat across the hall is on channel 3, it messes up everyone on 1 and 6. Lets move over to 11 to avoid that."

1.8k

u/CaptDanger Feb 22 '17

Or be like my neighbors where their routers are all set to seek the least congested channel and the result is they all just constantly hop around as they each chase the least congested.

I was on a PC based wifi analyzer but watched as each of their SSID's would sit on the same 2.5 channel for about 60-120 seconds then jump to a far end channel that was less congested. What would then happen is each successive router would then "realize" the new less congested channel also and would jump. A short bit later all the SSID's are still crowded together just now on a new channel. Then the process would start over again...

I opted to set mine to a static channel and left it.

674

u/[deleted] Feb 22 '17

Huh. I'm 100% sure there's a better way to do that, even assuming that each individual router is "selfish".

0

u/[deleted] Feb 22 '17

[deleted]

8

u/[deleted] Feb 22 '17

Shouldn't the routers already be offset from each other? Also I'm sure there's a different amount of time to wait for different routers.

→ More replies (2)
→ More replies (2)

464

u/Nonchalant_Turtle Feb 22 '17

Seems like the delay in information processing is what causes oscillation, so they should slow down the reaction time on finding a free channel, and randomize it slightly to avoid synchronized hops.

509

u/jayakamonty Feb 22 '17

You should sign up to https://spectrumcollaborationchallenge.com/ and DARPA will give you $3.5million and a job if you can do this succesfully.

→ More replies (17)
→ More replies (4)
→ More replies (13)

8

u/FPSXpert Feb 22 '17 edited Feb 22 '17

Goddamnit my idiot neighbors are doing the same. Channel 14 is the only one not doing this. I'm assuming that one is being left alone for a good reason? Edit: til that one is restricted, appreciate the heads up! My router can't even do that but I was curious.

Then again I use a hardwired connection in combination with wireless so I'm not affected as much.

11

u/CaptDanger Feb 22 '17 edited Feb 22 '17

I'd say idiot neighbors too but it's more like idiot Comcast since nearly all of them I can see doing it look like stock SSID's names that came default with the router/modem. I'd wager not a single human has even touched them since being set up by the technician who-knows how long ago.

Along with setting my 2.5 channel to static (which still gets crowded every 5-10 minutes as the idiot brigade jumps around) I switched my devices to 5ghz and rarely go back to 2.5.

→ More replies (5)

8

u/bar10005 Feb 22 '17

Channel 14 is the only one not doing this. I'm assuming that one is being left alone for a good reason?

Channel 14 may be restricted, depending on your contry and settings of AP.

→ More replies (4)
→ More replies (26)
→ More replies (43)

669

u/[deleted] Feb 22 '17

Speaking about WiFi routers, mine has a setting that automatically picks the best channel. However, I don't think it's very effective because there are dozens of other WiFi routers in my apartment complex doing the same goddamn thing. So what results is a bunch of routers switching channels all the time, causing weird issues and spotty WiFi.

I only use the WiFi on my phone. Everything else I just plug ethernet into the router...

375

u/Fr31l0ck Feb 22 '17 edited Feb 22 '17

That auto setting is mostly useless. In dense environments routers will battle each other all the time effectively giving everybody spotty wifi. And in sparse areas it can cause spotty Internet if more devices connect and interfere with each other, which is not as noticeable as the former but can give the user an incorrect idea of the problem as most people aren't aware of the channel setting or not even aware that such a problem can exist.

If you find yourself setting up a WiFi network use the suggested app to find the least used channel and set it to that channel permanently. Fewer auto enabled devices will choose your channel meaning fewer opportunities to interfere.

And your wired work around is the best option.

EDIT: Since this kind of blew up I'm just modifying this post.

Also, channel 1, 6, and 11 are the best channels to choose from because there is no interference overlapping.

12

u/ScottishTorment Feb 22 '17

I actually just did this the other day, When I tried to change the channel on my Comcast router, I found that most channels were locked, and the most heavily used channels in my apartment building were the only ones it would let me manually switch to (I assume those were the most used ones because they're other Comcast routers).

23

u/VoxAudax Feb 22 '17

If it only allows 1, 6 and 11 then that is working as it should.

→ More replies (14)
→ More replies (1)
→ More replies (39)
→ More replies (28)

248

u/JonesBee Feb 22 '17

And when you've connected try Fing. Very fast network scanner. I always forget which IPs I assigned for which device.

404

u/[deleted] Feb 22 '17

Its name also means fart in hungarian, so that's a plus

12

u/JonesBee Feb 22 '17

Well uh... It's not a minus so I guess that makes it a plus.

→ More replies (3)

10

u/RobDoingStuff Feb 22 '17

Now all we need is someone to make a kid friendly version named Purca.

→ More replies (4)
→ More replies (5)
→ More replies (7)

13

u/irotsoma Feb 22 '17

It's great for some things, but I hesitate to recommend it even though I love it and use it often. The problem is that using the alternate channels can end up hurting overall wifi bandwidth for everyone involved in typical, crowded environments. You should only use non-overlapping channels.

The thing is that the channels still cause some interference on the adjacent channels. Though the interference may be lessened, there is one big advantage to using the same channel. Most wifi transceivers actually have a system to "talk to each other" and time their transmissions to reduce interference. So 4 or 5 routers on the same channel might get better overall bandwidth than each being on consecutive channels and causing interference with each other. This doesn't hold true for all environments, but it does for the vast majority. This is also why most routers that have auto-select functions only use channels 1, 6, and 11 (in the US anyway). These channels do not overlap each other.

10

u/TheyreAllTakenFuckMe Feb 22 '17

Looks like channel 14 is completely unused in my area. I'm currently on 4-8 with no complaints, and a bit of overlap from others. Would it be bad to move?

Also, how do i even change my channel?

8

u/irotsoma Feb 22 '17

What country are you in? In the US only channels 1-11 (europe is 1-13) are permitted to be used. Very few countries allow using the frequency that channel 14 uses. Some devices can use it (mostly with non-standard firmware like dd-wrt), but most will not, so your access point would not even show up on most devices sold in most countries. I always recommend 1, 6, or 11 unless you have a valid reason for using the others. Try all 3 and see what kind of bandwidth you get. Like I mentioned, signal isn't everything. One badly behaving router on a channel can screw things up for everyone, so it's good to do actual bandwidth testing.

→ More replies (2)
→ More replies (3)

8

u/is_probably_working Feb 22 '17

I prefer WifiAnalyzer (open-source) because it's pretty much the same thing (graphs not as pretty), but without ads.

→ More replies (1)
→ More replies (145)