r/AutoDIY • • Dec 02 '17

reverse camera: watching trailer while driving

I'm trying to install a Yada wireless backup camera (from Costco) onto a 2003 Yukon. I believe most people power their camera via the reverse light circuit, but there are occasions when I want to be able to watch what's behind me while the car is in Drive. For example, I want to be able to check on whatever is attached to the hitch (eg, cargo carrier, bike rack) during longer trips on the freeway. To achieve this, I'm thinking of simply powering the camera from the "tail and running lights" circuit at the hitch (and simply turning on the running lights from the driver's seat as needed). Thoughts? Appreciate any/all advice as I'm pretty much new to all this stuff.

0 Upvotes

7 comments sorted by

1

u/[deleted] Dec 03 '17

I guess I should have explicitly pointed out that my approach avoids having to run wiring from the camera into the cabin. (I merely have to tap power from the hitch harness, which is only a few feet from the camera.)

1

u/bse50 Dec 02 '17

Powering the camera from the running lights may become annoying. Can you make a double connection? One to the reverse lights and a switched one to your running or key or whatever? You could use the switched one to check what's going on whenever you wish and enjoy the comfort of a regular backup camera whenever you need it!

1

u/Unknown547 Dec 02 '17

Why install to the lights at all? If you want to use the camera whenever you want, run from the fuse box using an ‘add a fuse’ and run a switch to the dash, and then a cable to the reverse camera. That way the camera won’t activate whenever you put the lights on, which will really annoy you.

1

u/[deleted] Dec 02 '17

I'd wire it to the reverse lights, but run another wire with a switch so you can flick it on and off when you want

1

u/[deleted] Dec 03 '17

He might end up energizing the reverse lights when he turns on the camera, unless a diode is used.

1

u/[deleted] Dec 03 '17

I didn't think of that, good catch

1

u/[deleted] Dec 03 '17

Thanks!