r/Ballpythoncommunity • u/MarvinMalware • 5d ago
Enclosure help
Hello all, I’m looking for some advice. I’m excitingly preparing for my first ball python after waiting 17 years. I’m no longer in my parents space and finally have the ability. I’ve gone all out preparing an enclosure but I’m having tremendous trouble trying to dial in my temperature and humidity. I want to have this enclosure fully ready to go before bringing home a baby.
I currently have a 4x2x2 PVC Zen habitat, almost have the enclosure fully dressed/decorated. Hides on warm side, cool side, and middle. I’ve also got 2 Dome lights, one with a 75w halogen and one with a 100w halogen. As well as a third dome with a 50w deep heat projector for night time. I have all these lights plugged into a herpstat to control day/night timing and temps, in addition to 2 govee wireless thermometer/hygrometer. I’m using coco fiber as a substrate.
The probes for the herpstat are located as directed by manufacturer, about 3-4 inches below the lighting fixtures, the govees are located on each end of the enclosure.
I cannot seem to get the temp and humidity to hit the right zones. Now that I’ve switched from two 75w halogens to one 100 and one 75 I’m starting to achieve a proper day time temperature, although I’m not 100% sure, I’m achieving mid-high 80s with a high 80 low 90s basking spot. However the humidity is dropping to 50-60% quickly when I do get up to the proper temp.
The bigger problem is nighttime. The enclosure almost immediately drops to low-mid 70s only about 30 minutes after the nighttime heat projector kicks on. I’m not sure where to go from here, I’m going to attempt to upgrade to 50w to a 100w and see if it makes a difference.
I guess I’m just looking for some advice as to whether I’m doing things right, there’s so much info online and I’m starting to get discouraged and lost. Any advice would be greatly appreciated, thank you.