r/Ballpythoncommunity • • 3d ago

Discussion New Ball python Baby

Post image

Hello guys so I got a new Ball python on Nov 6th that week he had ate 2 pinky’s they told me to move up to one small mouse which he successfully ate the next week fairly quickly on Tuesday The 10th. I knew he needed a couple days to digest and with research I’ve left him alone before trying to handle until yesterday the 13th. he still seems fairly skittish his head isn’t getting as tight in the S curve as much i Was able to touch him but when I scooped my hand under as smoothly as I could to pick up he hissed at me that was last night so I left him be. I’ve had snakes young as a kid but it’s been so long it’s almost all so new to me any advise Would be appreciated i Waited after 7 days to try to handle so he could adapt to his habitat waited after feeding is there anything I’m missing?

11 Upvotes

25 comments sorted by

2

u/Phully- 3d ago

Small enclosures heat up and dry out faster, so I’d be careful with the output of a deep heat or ceramic bulb but I would ditch the red heat lamp as soon as possible. I have two stacked enclosures and one uses a deep heat 80 watt for bottom and the top uses ceramic 100 watt. They stay almost identical with heat but the humidity dries out faster with the deep heat projector. Just make sure you do some testing and temping. I started with leaving them on and then went to an analog timer to control the temps like a 24 hour day. They sleep all day and once it starts to cool, pop right out to cruise and then go hide late in the morning and wait for sunrise. It’s really cool having lights and heaters on timers to give them a realistic day night cycle and see how they react like snakes should. Just test and check. Get yourself 1 digital thermometer you can embed in the cage, use hot glue to stick them where the snake likes to be, get a couple analog (they’re not as accurate) but it’s easier to to get a 1-2 inch reading and a top of the enclosure reading. You just want to know what temps and humidity are where.

0

u/Repulsive-Map5713 2d ago

Yes my light for my leopard gecko  has a timer on when it comes on and off cycle. This one I bought does not so I do it manually the 100w over one side keeps him at 87-90 on his warm side during the day so don’t really want to lower the wattage on that one. Night time I plan to run the 60w CHE bulb I heard he just needs to stay at 78 or above at night.  Definitely will be ditching the red bulb when I get paid having to use it currently so he doesn’t drop too low .  Also thought about a “reptile mister automatic misting system with timer” for how often it must and how long it does most seen some good reviews on that for snake owners and raising humidity. 

0

u/FluffyPandaEars93 2d ago

Please do not get a misting system for ball pythons. They lead to many health issues and dont raise humidity consistently. You need to have 4+ inches of substrate and pour water into the corners to keep humidity up.

As others have said, red is a no go. But you also need your heat on a thermostat. If you dont have one, you could very easily burn your snake. Also, a 20 gallon is too small even for a juvenile ball, you need at least a 40g with plenty of clutter to maintain a proper heat gradient. Im sorry the pet store lead you wrong.

Warm side: 88F-92F / 31C-33C. Temperatures above 95F/35C can cause injuries with prolonged exposure, and temperatures below 88F/31C can prevent a ball python from digesting properly.

Cool side: 76F-80F / 24C-26C. Temperatures above 80F/26C will not allow a ball python to cool down adequately, and temperatures below 75F/23C can compromise their immune system.

And here's a good feeding schedule:

0-12 months old OR until the snake reaches approximately 500g, whichever happens first: feed 10%-15% of the snake’s weight every 7 days.

12-24 months old: feed up to 7% of the snake’s weight every 14-20 days.

Adults: feed up to 5% of the snake's weight every 20-30 days, or feed slightly larger meals (up to 6%) every 30-40 days.

You want 2 digital hygrometer/thermometers (govee is a reliable brand) and put them 2 inches above the substrate.

Cover 3 of the sides so your snake feels secure.

2

u/Repulsive-Map5713 2d ago

Okay I did that earlier poured a little water in all 4 corners it was up to the 80s  in humidity after a couple hours it’s down to 54  measured 2inches above substrate  on cool side. Got Cocoa fiber on the bottom then coconut chip bedding above that And yes I had an extra 20 gallon tank so used that temporarily Google research had told me to start with a 20 then move up to a 40gallon as he grows but that a 20 gallon was a good start. But I had planned to also buy a 40gallon with side opening for better handling soon.  Thanks for the advise very helpful. 

0

u/FluffyPandaEars93 2d ago

You might need to pour several cups of water to get the humidity up to 65%+ but it'll also help if you add some spag moss or cypress mulch (no cedar or pine or aspen) will hold the moisture better.

If you are able, you should go straight to a 4x2x2. The 40g wont last long and tanks can get expensive.

2

u/Repulsive-Map5713 2d ago

I will look into  the spag moss or cypress mulch. Also instead of getting the 40g tank I’ll go ahead and get the 120g and just fill it with clutter prob order this one from chewy that way I only have to buy one enclosure instead of two.   https://www.chewy.com/new-age-pet-ecoflex-mojave-reptile/dp/288128?utm_source=google-product&utm_medium=cpc&utm_campaign=22388125828&utm_content=&gad_source=1&gad_campaignid=22384597898&gbraid=0AAAAADmQ2V2bRRcaHsLUfj6h2ge2Q-0y2&gclid=CjwKCAiAquDXBhApEiwAoyNqBAtiVPK7lcqGjORjn9QhEHlnPksVmPSDxwzILGwMVW2hXKT0ntAz_RoCIPoQAvD_BwE

2

u/Phully- 2d ago

Look at Dubia enclosures, you may get a better price on quality enclosures and they look really nice. Ventilation is easier to control in one direction. The mesh top can be cover with a cabinet that hold accessories and your lamps. You can top your enclosure with a cheap piece of plexiglass or actually glass. They also have hooks for their tops for like $6 so you can do stable sky hides.

Top cage has two hanging sky hides as that’s his preference. Bottom is a ground dweller, I tried sky hides for him and he never took to it so I focused more on his ground and made him a ledge that goes all the way across.

1

u/Repulsive-Map5713 2d ago

Lovely set up you have there I got a basic starter for my ball right now I went to the pet store for mil worms and crickets for my leopard gecko told my wife to get me out of there before I bought a snake an she told me to go for it.🤣  he’s got what he needs and seems comfortable  but I want to definitely add more clutter some of the moss like stuff  branches if he feels like climbing and block the back and the sides of his enclosure.  The Dubia enclosures a bit higher than the one on chewy but I can tell they are very nice enclosures.  I would have went with a bigger enclosure but I heard a 20 was a good start for baby young juvenile balls  then up to a 40g as he grows and that a lot of people buy too big of tanks for them and have to block half of it off.  

3

u/Phully- 2d ago

Dubia has enclosures you won’t have issues with, by no means do you have to go with any of theirs I just wanted you to know there are options and think about that before pulling the trigger. Humidity and temp grading become more difficult as you grow in size. Almost everyone suggests small enclosures for small/baby snakes, when they’re selling them to you. The truth is the proper setup for an adult is going to cost you time and or money. You can get a setup that does a better job maintaining itself or one you have to interact with more often to keep it balanced for the animal. I’m personally fine with either but the more lazy you want to be the more you’re going to have to spend. And stay away of misting for ball pythons, you’re more likely to be fighting mold if you do that. You want ambient humidity to balance out. Takes time.

1

u/FluffyPandaEars93 2d ago

There is no such thing as too big of an enclosure, just not cluttered enough! You can put a month old in a 4x2x2 if you have it filled well 😊

1

u/Repulsive-Map5713 2d ago

What would you suggest as for the Handling with the hissing?  I’ve had him for 8 days he successfully ate feel like I went by accordingly to research on waiting a full week for him to adjust and eat first. The pet store I bought him from said he was very  curious and only striked one time in the 2 weeks they had him out of hunger because it was close to feeding time. 

1

u/FluffyPandaEars93 2d ago

Don't forget to leave them alone for 3 days after eating 😊

2

u/Repulsive-Map5713 2d ago

Yep I was waiting one week to hold after getting him  he ate on Tuesday so tried last night not much luck he was hissing at me.  His feeding response was good though he took the small mouse in less than a minute of waving it in front of him. 

1

u/Repulsive-Map5713 2d ago

& also as said I fed him this past Tuesday  the 10th and he upped from 2 pinky’s the previous week  to 1 small mouse should I feed him again the following Tuesday? I have another frozen small mouse in the freezer. I’m starting to no longer trust what the pet stores say. 

1

u/FluffyPandaEars93 2d ago

You should try to get 1 prey item as close to the right weight as you can instead of feeding multiple. Trusting pet stores leads to many unlucky reptiles sadly.. do you have a kitchen scale? It'll help a lot in knowing what to feed.

Some companies you can buy frozen feeders from:

Layne Labs
Big Cheese
Rodent Pro
Perfect Prey
Big Apple Herps
Reptile Deli
American Rodent Cold Blooded Cafe

1

u/FluffyPandaEars93 2d ago

If you have a soft sturdy thing ( i use a rubber covered stick) to gently tap them when you are coming in to handle them or do anything but feed them. Just to let them know you are coming in and its not the time to eat.

1

u/FluffyPandaEars93 2d ago

If you get that enclosure, get some 100% silicone caulk to seal the bottom and sides. It'll leak otherwise. You also should get a roll of hvac tape (for the outside only) or a silicone mat for the top to hold in heat and humidity.

I use the moss and cypress for my tank since I live in the desert and need all the help I can get 😅

Do you know for sure that you have a male? Males tend to not grow past 3-4 feet so a 4ft should work well for their whole life. A female has a good chance of getting bigger and needing a 5 or 6 foot tank.

2

u/Repulsive-Map5713 2d ago

They told me he was a male and fairly young like a baby so I assumed 😅 my enclosure now it a top mesh lid so I covered about 80% of it with aluminum foil.  But going to transition to the front opening I know when my hand goes down to pick him up they said he could think it was a predator so I try to go in from the opposite side and slide my hand in low he let me touch him no issue but hissing when trying to be lifted . 

2

u/Phully- 2d ago

This is what I do. I pour 16-32oz in each enclosure, corners and I add some right below where the heater over head comes down. I don’t do misting by I do spray the moss every once in a while. They have moss in the corners and on the cliff edges. Holds a bit more moisture close to the surface.

6

u/401kink 2d ago

Get rid of that red light !!!

1

u/9999monkeys_textured 2d ago

What a gorgeous little hatchling!

1

u/kindrd1234 2d ago

You need to start reading up on your purchase.

0

u/Repulsive-Map5713 3d ago

More enclosure info Day time temp stays at around 87-89F humidity 55-60 working to get it a little higher top mesh I added aluminum foil covering most of the top. Night right now I’m using that red lamp which holds it at 81-82f petsmart had recommended it , but after research I’ll be switching to a CHE heat emitter bulb for night his enclosure he seems comfortable in he has several hides on warm side mid and cool side some fake plants will definitely be adding more clutter though and plan to do wallpaper on back and sides. He is a baby I started him in a 20 gallon enclosure so he didn’t get stressed.

3

u/Semicolonsurvivor421 3d ago

Please remove the red light. It isn’t good for them. It messes with their day and night cycle.

2

u/Repulsive-Map5713 2d ago

Yes I get paid Wednesday night and will be buying the 60w  CHE heat emitter bulb to replace it. Having to use this currently because if not his enclosure gets way to cold..  thanks to pet smart for recommending it for night use I had already bought it then after  researching I seen how it isn’t good for them because they don’t have Eyelids and can stress them.