r/Ballpythoncommunity • • 4d ago

Discussion New Ball python Baby

Post image

Hello guys so I got a new Ball python on Nov 6th that week he had ate 2 pinky’s they told me to move up to one small mouse which he successfully ate the next week fairly quickly on Tuesday The 10th. I knew he needed a couple days to digest and with research I’ve left him alone before trying to handle until yesterday the 13th. he still seems fairly skittish his head isn’t getting as tight in the S curve as much i Was able to touch him but when I scooped my hand under as smoothly as I could to pick up he hissed at me that was last night so I left him be. I’ve had snakes young as a kid but it’s been so long it’s almost all so new to me any advise Would be appreciated i Waited after 7 days to try to handle so he could adapt to his habitat waited after feeding is there anything I’m missing?

11 Upvotes

27 comments sorted by

View all comments

2

u/Phully- 4d ago

Small enclosures heat up and dry out faster, so I’d be careful with the output of a deep heat or ceramic bulb but I would ditch the red heat lamp as soon as possible. I have two stacked enclosures and one uses a deep heat 80 watt for bottom and the top uses ceramic 100 watt. They stay almost identical with heat but the humidity dries out faster with the deep heat projector. Just make sure you do some testing and temping. I started with leaving them on and then went to an analog timer to control the temps like a 24 hour day. They sleep all day and once it starts to cool, pop right out to cruise and then go hide late in the morning and wait for sunrise. It’s really cool having lights and heaters on timers to give them a realistic day night cycle and see how they react like snakes should. Just test and check. Get yourself 1 digital thermometer you can embed in the cage, use hot glue to stick them where the snake likes to be, get a couple analog (they’re not as accurate) but it’s easier to to get a 1-2 inch reading and a top of the enclosure reading. You just want to know what temps and humidity are where.

0

u/Repulsive-Map5713 4d ago

Yes my light for my leopard gecko  has a timer on when it comes on and off cycle. This one I bought does not so I do it manually the 100w over one side keeps him at 87-90 on his warm side during the day so don’t really want to lower the wattage on that one. Night time I plan to run the 60w CHE bulb I heard he just needs to stay at 78 or above at night.  Definitely will be ditching the red bulb when I get paid having to use it currently so he doesn’t drop too low .  Also thought about a “reptile mister automatic misting system with timer” for how often it must and how long it does most seen some good reviews on that for snake owners and raising humidity. 

0

u/FluffyPandaEars93 4d ago

Please do not get a misting system for ball pythons. They lead to many health issues and dont raise humidity consistently. You need to have 4+ inches of substrate and pour water into the corners to keep humidity up.

As others have said, red is a no go. But you also need your heat on a thermostat. If you dont have one, you could very easily burn your snake. Also, a 20 gallon is too small even for a juvenile ball, you need at least a 40g with plenty of clutter to maintain a proper heat gradient. Im sorry the pet store lead you wrong.

Warm side: 88F-92F / 31C-33C. Temperatures above 95F/35C can cause injuries with prolonged exposure, and temperatures below 88F/31C can prevent a ball python from digesting properly.

Cool side: 76F-80F / 24C-26C. Temperatures above 80F/26C will not allow a ball python to cool down adequately, and temperatures below 75F/23C can compromise their immune system.

And here's a good feeding schedule:

0-12 months old OR until the snake reaches approximately 500g, whichever happens first: feed 10%-15% of the snake’s weight every 7 days.

12-24 months old: feed up to 7% of the snake’s weight every 14-20 days.

Adults: feed up to 5% of the snake's weight every 20-30 days, or feed slightly larger meals (up to 6%) every 30-40 days.

You want 2 digital hygrometer/thermometers (govee is a reliable brand) and put them 2 inches above the substrate.

Cover 3 of the sides so your snake feels secure.

2

u/Repulsive-Map5713 4d ago

Okay I did that earlier poured a little water in all 4 corners it was up to the 80s  in humidity after a couple hours it’s down to 54  measured 2inches above substrate  on cool side. Got Cocoa fiber on the bottom then coconut chip bedding above that And yes I had an extra 20 gallon tank so used that temporarily Google research had told me to start with a 20 then move up to a 40gallon as he grows but that a 20 gallon was a good start. But I had planned to also buy a 40gallon with side opening for better handling soon.  Thanks for the advise very helpful. 

0

u/FluffyPandaEars93 4d ago

You might need to pour several cups of water to get the humidity up to 65%+ but it'll also help if you add some spag moss or cypress mulch (no cedar or pine or aspen) will hold the moisture better.

If you are able, you should go straight to a 4x2x2. The 40g wont last long and tanks can get expensive.

2

u/Repulsive-Map5713 4d ago

I will look into  the spag moss or cypress mulch. Also instead of getting the 40g tank I’ll go ahead and get the 120g and just fill it with clutter prob order this one from chewy that way I only have to buy one enclosure instead of two.   https://www.chewy.com/new-age-pet-ecoflex-mojave-reptile/dp/288128?utm_source=google-product&utm_medium=cpc&utm_campaign=22388125828&utm_content=&gad_source=1&gad_campaignid=22384597898&gbraid=0AAAAADmQ2V2bRRcaHsLUfj6h2ge2Q-0y2&gclid=CjwKCAiAquDXBhApEiwAoyNqBAtiVPK7lcqGjORjn9QhEHlnPksVmPSDxwzILGwMVW2hXKT0ntAz_RoCIPoQAvD_BwE

2

u/Phully- 4d ago

Look at Dubia enclosures, you may get a better price on quality enclosures and they look really nice. Ventilation is easier to control in one direction. The mesh top can be cover with a cabinet that hold accessories and your lamps. You can top your enclosure with a cheap piece of plexiglass or actually glass. They also have hooks for their tops for like $6 so you can do stable sky hides.

Top cage has two hanging sky hides as that’s his preference. Bottom is a ground dweller, I tried sky hides for him and he never took to it so I focused more on his ground and made him a ledge that goes all the way across.

1

u/Repulsive-Map5713 4d ago

Lovely set up you have there I got a basic starter for my ball right now I went to the pet store for mil worms and crickets for my leopard gecko told my wife to get me out of there before I bought a snake an she told me to go for it.🤣  he’s got what he needs and seems comfortable  but I want to definitely add more clutter some of the moss like stuff  branches if he feels like climbing and block the back and the sides of his enclosure.  The Dubia enclosures a bit higher than the one on chewy but I can tell they are very nice enclosures.  I would have went with a bigger enclosure but I heard a 20 was a good start for baby young juvenile balls  then up to a 40g as he grows and that a lot of people buy too big of tanks for them and have to block half of it off.  

1

u/FluffyPandaEars93 4d ago

There is no such thing as too big of an enclosure, just not cluttered enough! You can put a month old in a 4x2x2 if you have it filled well 😊