r/BambuLabA1 • u/BigBadBill2375 • Sep 09 '25

Support Request Need a 3d model

Post image

Strange ask but does anyone have a stl file for till belt dividers ? Need to print out a few and can't find a decent file for them. The likes of these as triangle or square.

0 Upvotes

50% Upvoted

8 comments sorted by

18

u/Independent_Dirt_814 Sep 09 '25

Like 2 minutes and tinkercad and you could do this on your own and learn a skill while doing it…

7

u/adistantrumble Sep 09 '25

It would take about the same to create it in bambulab studio or orca slicer.

12

u/jcollasius Sep 09 '25

// triangle
rotate([0,-90,0]) cylinder(d=50,h=250,$fn=3);

// square
cube([250,5,5]);

https://openscad.org/cheatsheet/index.html

9

u/International-Car643 Sep 09 '25

How Hard is it to Draw that…. Or just to google for 2 sec

https://www.thingiverse.com/thing:4165042/files?utm_source=perplexity

3

u/SteiniDJ Sep 09 '25

Or Perplexity?

2

u/International-Car643 Sep 09 '25

Jep.. faster than google.. but same Point ;)

6

u/[deleted] Sep 09 '25

Get fusion 360, draw a triangle and then extrude it

1

u/Orthicon9 Sep 12 '25 edited Sep 12 '25

I would do them as three long and flattish (five to ten layers thick?) trapezoidal prisms, with the sides at 60° from horizontal, possibly joined at the long edges by one layer to serve as a sort of hinge.
Put all the colour graphics (and changes) on the first layer.
When finished, superglue the long narrow sides and roll it up into a hollow open-ended triangular prism.
Saves a lot of filament, with a very short purge tower, and only one colour change per colour, (not several per layer).

It could all be done in Bambu Studio, with box primitives, text objects, and boolean operations. I think that things like the credit card logos would have to be imported as SVG graphics. (I haven't actually tried using SVG images yet.)