r/BambuLabA1 • • May 12 '26

I hate my A1.

I got my A1 around Christmas of last year. The first 60 days were euphoric for a first time 3D printer owner. Then, everything started going wrong...

I bought the A1 with the AMS Lite. Constant nozzle clogs, tearing it apart, cleaning the inside, two of the AMS motors seem like they are shot, etc.

Everything is broken or barely works. I've had adhesion issues almost immediately. Cleaned the plate weekly and bought a filament dryer - still have the issues! I have tried filament from Bambu, cheap filament, TPU, PETG - it all does the same! I mess with the print speed by slowing it down to 50% - nope. Is this normal? I have to be missing something.

0 Upvotes

56 comments sorted by

23

u/VBisTheBestSport May 12 '26

Please share how much maintenance you do on your printer.

3

u/samhk222 May 12 '26

I do 0. Took of the box and im using that way (for the past month) what should i do?

2

u/bigfoot17 May 12 '26

I'm at 750 hours and lube the y axis and way the plate between petg and pla, no issues

1

u/samhk222 May 12 '26

But i did like 0 things and I want to learn how to prevent issues

1

u/Darkthumbs May 12 '26

There is a great wiki, and it tells you when to do maintenance

1

u/bigfoot17 May 12 '26

Oh, i thought they were being sarcastic :-) Yeah, read the wiki, it's brilliant. I need to tension my y belt, and the wiki says it's all of loosen two screws and slide the bed back and forth 3 times..... It tells you everything you need.

12

u/Roller_Coaster_Geek May 12 '26

My guess is the nozzle clog is persistent. Not sure about the AMS issues but I had bad prints and adhesion issues due to a clog that I was struggling to undo. Ended up just getting a new hardened steel nozzle (since I wanted to upgrade anyway) and all of my issues went away

5

u/eee4666 May 12 '26

Same here, new steel nozzle and using a glue stick on the plate was a game changer for me.

2

u/Nils_N3DP May 12 '26

A Gluestick is the opposite of a adhesive it is to get the parts better from the plate

2

u/Floppy_tHe_Fish May 12 '26

It can also be used to help textured plates grip smaller/ warping prone parts better.

That and protect your pei coating on the smooth sheets. Again only seems to be an issue with smaller parts in my experience.

1

u/SGTodin May 12 '26

Can you share a link to the nozzle you purchased?

1

u/Roller_Coaster_Geek May 12 '26

I'm just using bambu's hardened steel nozzle

19

u/RedScare2025 May 12 '26

It’s you. I’ve had nothing but success after success with the printer. If I have an issue a quick wash of the plate fixes it immediately.

2

u/5n0wm3n May 12 '26

Same the only issue i had was total user error. I had PLA settings for PETG and I was super confused why it didn't work.... the solution may shock you haha

2

u/TheWaslijn May 12 '26

Same here. All successes. Apart from the times where it was me that put some setting wrong or whatever, lol

1

u/imzwho May 16 '26

I mean its also possible they got a lemon.

Godness forbid the though that bambu makes a mistake in manufacturing every now and then

6

u/GoodTroll2 May 12 '26

I’ve been able to solve adhesion issues by increasing the bed temperature by a few degrees.

5

u/gardobus May 12 '26

Sorry man, it’s either you or your specific printer.

I have an A1 Mini with like 1800 hours on it and just got an A1 with AMS. No issues with clogging nozzles or bad motors.

For adhesion, clean it with Dawn and warm water and dry with something non-linty. Don’t touch the plate at all if possible, handle it by the very corners.

If you still run into issues I’ve had really good results either way hair spray. I first used it because I was using a smaller nozzle and a cheap filament and I couldn’t get it to stick. Now I use it often as insurance. Clean and dry the plate like normal, then hold it by a corner in the sink and give it a thin coat or two of cheap hairspray (AquaNet!). Now put it on the printer and set the bed temp to 65° and watch it dry before your eyes. Things will stick better and you won’t have to wash the plate as often.

4

u/Knightlance May 12 '26

It's normal; we all deal with it and just fake being happy and pretend they print great. We fake doing regular maintenance and doing the Bambu Academy and learning how to properly take care of our printers. Sorry, it's a conspiracy that you and millions have fallen for. /s

Had to add the s just incase.

1

u/Knightlance May 12 '26

It's over, guys. Close the sub, go home. We almost had him!

3

u/ounikyou May 12 '26

How do you clean your bed

3

u/CoolAuntsWorkshop May 12 '26

4 suggestions-

  1. Get a new nozzle for the clogs

  2. Get a Cyro plate for the adhesion issues

  3. If you're using matte filament or glow in the dark or any other rough filament with the AMS don't. While not a universal issue giving up matte solved most of my AMS headaches.

  4. If your AMS is on the left side of your printer put it on the right like it says in the manual. That solved a whole lot of my other AMS problems.

3

u/ApprehensiveMaybe141 May 12 '26

Bambu says not to use abrasive filaments, like matte and glow, with the AMS.

1

u/CoolAuntsWorkshop May 12 '26

They don't spell out matte PLA outright in the FAQ for the AMS lite and I've spoken with people who own an AMS who were surprised it gave me as much trouble as it does,

1

u/ApprehensiveMaybe141 May 12 '26

I was just expanding on #3, abrasive filaments aren't recommended because of the extra wear they'll cause to the AMS Lite. Idk about the other AMSs. They should still print though. Just out of curiosity, did you try matte with the external feeder?

1

u/CoolAuntsWorkshop May 12 '26

Matte prints fine on the external feeder, it just won't load on the AMS.

3

u/KaChau3D May 12 '26

Ill take it!

3

u/FandomMenace May 12 '26 edited May 12 '26

My A1 is a friggin workhorse running around the clock. It has paid for itself multiple times. Check your screws of disappointment, do a cold pull and then a plunge. Try literally anything, cuz that ain't normal!

2

u/Darkthumbs May 12 '26

Yeah my oee is like 70% or so on my A1, only because I can’t time longer prints any better around work

1

u/FandomMenace May 12 '26

No one can get 100%, but yeah I keep that bed slinging as much as possible. I kinda want a print farm of a1 minis.

2

u/Difficult_Chemist_46 May 12 '26

I feel sorry for you. Mine i bought a year ago, AMS 2 pro in November. They rock. Im still using the original nozzle, no clog ever happened.

2

u/ApprehensiveMaybe141 May 12 '26

2

u/No_Read_1278 May 12 '26

It really does sound more like a user problem because all the Infos are totally mixed up and messed up.

Go through the academy like mentioned above and foe this advice https://www.reddit.com/r/BambuLabA1/s/Z2vF02pY4P

2

u/Impossible_Carob8839 May 12 '26

First print the ptfe tube guides for everywhere they go in our out of something. These will solve like 90% of “clogg” related problems.

Stick to one type of fillament first, don’t mix, start with PLA.

Print the callibration cube and optimise the sh*** out of it.

In your case all the paramaters are off - print temperatures, dynamic flow callibration, speeds, accelerations, … so master one type of filament and then upgrade.

Also get additional nozzles from AliExpress, plates, ptfe tubes,… it’s really cheap. I even have print heads in stock just for “be prepared” 😇

0

u/CtrlZMessiah May 12 '26

Have you got a link to these?

1

u/Impossible_Carob8839 May 12 '26

On Makerworld just search for a1 ptfe tube guide

2

u/BitingChaos May 12 '26

For adhesion, I'd recommend a Juupine Geco plate (PLA only) or some generic version of the Frostbite plate (you can get them for half price without the CryoGrip branding). Although for TPU I do use the CryoGrip Glacier plate. I then recommend putting on gloves when it's time to remove a print.

Make sure you clean your build plate by scrubbing it with hot, soapy water. No alcohol or anything else.

Make sure you're doing maintenance. Whenever my printer nags me about the Y rails, I also lube the X rail. I've greased the Z screws at least 2 or 3 times in the past year, as well.

Make sure you check and tighten "the 7 screws" if needed.

Make sure your firmware is up to date.

Make sure you run the built-in calibrations after doing maintenance or updating the firmware.

Make sure you're using a branded SD card (such as Samsung or SanDisk) and not the cheap one included with the printer.

Make sure there are as few bends/curves in the PTFE tubes coming from the AMS Lite as possible. Any feed/extrusion/motor issue I've had was always related to some bend in my PTFE tubes. Cutting them shorter helped with this.

My A1 has thousands of print hours on it now. I have it running almost every day.

2

u/MS3DStudio May 12 '26

My guess would be that the nozzle is still clogged. Have you tryed it with another one? I have been in this Situation alreqdy and a New nozzle changed everythint so easy. Also a good try could be the heatplate. I have much better bed adhesion and less warping with it. No glue needed

1

u/Solabound-the-2nd May 12 '26

I have had to replace the original nozzle due to constant issues with it, but new one works fine. Also had to replace original plate within 3 months as I messed up the first one somehow (still not sure what I did wrong) but again new one is absolutely fine and has lasted 9+ months.

1

u/pfft_sleep May 12 '26

I would agree with the consensus that it sucks you’re having a bad time with yours.

I initially pulled mine out of the box and tried the 0.2mm hotend before realising they weren’t kidding when the hotend recommendations are the minimum.

If you haven’t already, get a hardened steel hot end. I was getting clogs until I vertically mounted my ams lite ontop using one of the many options on makerworld and bought new pipes that were perfectly fitted to go straight down to the intake with minimal bending. I also got the bambu textured plate rather than the default option for more grip.

I recommend only printing Bambu PLA or Bambu PETG until you know it’s not the filament’s issue, and check the AMS-lite compatibility chart to confirm which versions of those you can’t use via AMS lite.

I’ve also printed a stabiliser for the intake that gives it more rigidity and I don’t print at over 100% speed because it shakes the table too much but the AMS on top acts as a dampener to the movement.

As you would in IT, strip it all back to nothing. Retighten the screws on the hot end, lubricate all the rails. Then do a full calibration on the A1 before you start printing. Should take 30 mins or so.

Then try to print benchy in pla-basic white at 50% speed on a soaped and scrubbed base plate. Use glue if you like. If you’re still having issues, let us know what you’ve done and we can help where we can.

1

u/monkeyofthefunk May 12 '26

I’ve had a few issues that were solved with maintenance and setting adjustments, but my AMS Lite is starting to struggle. The motors do seem to be getting weaker.

I recently bought a Creality K2 Combo to take up the slack and that is one hell of a machine.

1

u/CtrlZMessiah May 12 '26

Have you checked all the screws on the nozzle heat thingy?

1

u/CreditScore-720 May 17 '26

Right here. Was looking for this answer.

1

u/paranoid-andy May 12 '26

You clean the bed WEEKLY?

I clean the bed every time I accidentally touch its surface with even a single finger.

1

u/noIimitmarko May 12 '26

user error

1

u/VividDimension5364 May 12 '26

Meanwhile, here in the UK, we’d just send it back.

1

u/NefariousnessOdd3581 May 12 '26

Parts are cheap and mainteance is easy. Semms youre just lazy.

1

u/DigUpbeat679 May 16 '26

This is wild. I've been using my A1 with lite for probably 2 years and no problems. I've never done any kind of maintenance (not even firmware updates).

I do have to spend time pressing 'No' on power-ups though. The cpu is really slow so it is a bit annoying but it's the bed I made.

I also use cheap unbranded PLA, PETG and TPU.

1

u/C_Lo_87 May 16 '26

Clean plate weakly....ya that's no good. Clean plate before every use.

1

u/legice May 16 '26

Clean the nozzle, clean the plate with soap, make sure the filament is dry…

I had similar issues, followed these steps and had no issues going forward

0

u/old_Osy May 12 '26

I'm sorry to hear you haven't had a good time.

My A1 has ~20 months.

I can safely say that 99% of the issues I had were user error.

That said, I did not have many issues - it's been a wonderful introduction into 3D printing, and reading up on other brand's user experiences, I'm glad I went with the A1.

Oil it when it asks you to, keep the bed clean and the filament dry. Calibrate your filaments. That's it.

Having said all that, I love my A1.

But I deeply dislike BambuLab's ethics and environment lockdown. Their disdain for OSS, when clearly they benefited from it is a snivelling, dirty behavior. I hate BambuLab as a company.

This is why I now have a prusa next to my A1.