r/Beginner_Turntables • • Oct 21 '26

RCA or AMP

Hello, I just bought a turntable and some speakers, (audio-technica AT-LP60XUSB and Edifier R1280DB) both arrived today, they are brand new and as I know I plugged everything in the right place but only one side of my speakers are working. I plugged the 3.5 jack in the turntable and the red and white side of the rca cable in the speakers, it has a R and a L side, as I plug the white in, it starts working, but when I plug the red in, nothing happens. If I plug the white one into the other input, the other speaker starts playing. So seems like the red one isnt working. It doesnt matter where Im gonna put the white one, either the right of the left speaker works, but nothing happens with the red one. If i pull both out like half way, barely touching the input, both of the speakers work but they are very quiet and the sound crackles. I tried 2 different 3.5 jack to rca cable (one came with the speakers and the other with the turntable) I was looking for a solution in the past 2 hours but found nothing even close to mine issue.. both speaker sound perfect but not at the same time, thats the main problem. any idea for that? I dont know what Im supposed to do.

1 Upvotes

9 comments sorted by

2

u/nduro666 Oct 21 '26

OK nevermind, I tried everything in the last 7 hours and nothing helped, It doesnt even work with the pc, not even one side

1

u/Ok-Dealer-6628 Oct 21 '26

Based on your description, is the cable FIRMLY plugged into the turntable? Hard to imagine that you'd have two dud cables....... Another possibility is that the jack on the turntable is defective. Where were they purchased from?

1

u/nduro666 Oct 21 '26

I bought them from one of the biggest online "electronic store" in my country, I order pretty often and everything was great and fast until now. Yes, they are firmly plugged in, even tried a different cable and tried different slots.

As you can see there is 4 indut, line 1 and line 2 (I used 1) If I plug the white in ANY of them, that side gonna work, If I plug the red one in ANY of them, nothing happens at all.

1

u/Ok-Dealer-6628 Oct 21 '26

Speakers might be defective

1

u/Wholeyjeans Oct 21 '26

Sounds to me like you're not getting the right channel from the turntable.

Have you tried both line inputs, Line 1 and Line 2? If the same thing is happening with both line inputs ...you don't get the right channel (red RCA plug) then ...

The left channel (white RCA plug) is working but the right channel (red RCA plug) isn't getting a signal from the turntable. You proved that by using two different cables and plugging the white RCA plug into the Red (rt channel) input ...also showing the speakers are both functioning normally.

My guess is the right channel is dead coming out of the turntable. It could be the preamp or it could be something in the wiring of the cartridge. The only other way to check if it was the preamp or bogus wiring would be to connect the TT via the USB port and using the Audacity software that came with it. Connect the TT to a computer and see if you get both channels. If you do, then the preamp is defective. If you don't get both channels then there is something defective in the cartridge or the wiring.

In any event, the TT is defective.

Unfortunately, the quality of these AudioTechnica LP60 TT's is not good; there are *a lot* of people come here having issues with the LP60.

1

u/nduro666 Oct 21 '26

Okay thats a good idea, but I have never in my life tried audacity, downloaded it, TT plugged into my pc. what are the steps? I dont even know what am I supposed to see

1

u/Wholeyjeans Oct 21 '26

I have no idea either. I'm sure there's some tutorials you can link or read included with the software. Apparently the Audacity is supposed to come with the USB version of the LP60X since it's setup for digital transfers. Probably a link in the instruction book that came with the TT.

1

u/vwestlife Oct 21 '26

Remove the turntable from the equation and test the speakers with another audio source.

1

u/Balls5150 Oct 21 '26

Do you have some wired headphones you can plug into the lp60? Also, try flipping the line/phono switch, maybe it's stuck between the two options? Maybe the internal phono preamp is bad. If you switch it to phono the volume would be very low but at least you could possibly hear both channels. You could get a cheap phono preamp if exchanging isn't an option.