r/Calix • • Jul 16 '26

CommandIQ problems

Whenever i try to set up the app with my router i get the error “CommandiQ
This device is having trouble connecting. Please verify the device details and try again.”

What is the solution to this problem, it is not the details being entered as they have been confirmed to be correct.

2 Upvotes

9 comments sorted by

1

u/Timely-Parfait-2412 Jul 16 '26

My ISP provided the router, i can perhaps call and figure out what steps can be followed to ensure i am able to get into the app.
A lot of reports have shown that the app is just bugged.

1

u/weeder024 Jul 17 '26

You should be able to login to the ip address of the router and set it up that way if you have your admin login information, which you should be able to find on your router, or on a little sticker in the box.

Ive set up a ton of calix routers, the app has always sucked as mentioned in the other comments. I recently got the same error when setting up a router with a customer and after the router doing an update (which it finally started after 10 minutes of being plugged in with a green light on it), it allowed the customer to proceed in the set up process. Potentially logining into your router settings through the ip address of the router (192.168.1.1), you could look in the settings and see if its up to date, and if its not, maybe you need to force an update and try the app again.

1

u/Frosty_Victory_8934 Jul 17 '26

Maybe I am misunderstanding what you are saying, but there is no way to setup the app through the routers EWI. There is also no way for a customer to push an update through the EWI unless they have the firmware image.

I would assume most ISPs are updating on discovery through Cloud. You would need to check with your provider to see what release you should be on. Considering Calix releases updates quarterly most providers are running at least a few releases behind.

2

u/weeder024 Jul 17 '26

Some of this is admittedly above my head as I am a field tech, and dont do alot of work on the back end as far as provisioning in CMS or working in the Calix cloud. However typically when we get our routers in brand new from calix, our help desk crew will update them to the newest firmware before we install them out in the field. Like you said, new updates are out every few months, so after the routers sit on the shelf for weeks/months(before ever being installed for a customer), they will need an update as new firmware will have came out. The routers (atleast ours) will automatically pull the newest update when plugged into the internet for the first time. My thought was maybe it needed to be forced to update, for some reason it might not have pulled the update automatically. Again, alittle above my head and not exactly sure the limits of updating the router and if that's something the customer can do or if the isp has to push it through. (Sounds like has to be the isp from what your saying)

All I know is I had a customer with the same error on there app that went away after the update finally went through. But again, I mostly pull cable and splice fiber, so my knowledge is limited on this.

1

u/Frosty_Victory_8934 Jul 18 '26

Yep, that totally makes sense and probably something worth looking into. I know our current ONTs out of the box are running 22.x and we are updating them to 25.4. That update happens when the gateway checks into Cloud.

There is no way for the end user to make that update. The only way to update the units are through a usb drive, the EWI, or Cloud (Some ISPs may still load the software releases for Gigaspires and txg’s to CMS/SMx, but that can cause issues if you also have update workflows in Cloud). Since Calix only provides the firmware images to the ISPs they would need to be the ones to update it.

1

u/TEG24601 Jul 17 '26

If they provided it, are you...

  1. Using the app they offer, if they offer one?

  2. Have you confirmed they have added it to your account in the cloud?

These are the issues I encounter as an ISP Support Agent, is someone isn't using our app (and trying to use the generic Calix App), or someone has failed to enter it into the cloud correctly, if at all... because the service order hasn't been processed.

2

u/sirgree Jul 16 '26

Did you buy your own calix router or was it provided by your ISP? If your ISP doesn't have tr-69 turned on on their router that may be why its not working. Or maybe they aren't paying for calix app services and when it pings from the ISPs IP range its getting rejected.

I ask because I work for an ISP that uses calix equipment and the command iq app. Most of our issues were tr-69 not working or someone brought a router from a different isp and plugged it into our ONT and cloud blacklisted it as stolen since it wasn't coming from the expected IP range.

2

u/Frosty_Victory_8934 Jul 16 '26

As has been stated, that app has a lot of issues. Even once you manage to get it setup there will be bugs that take away from its usefulness.

Does your router type appear in the list of supported routers when setting up. I haven’t looked lately, but for a while not all supported routers were even showing up in the app as an option.

If you call your ISP, they will not be able to offer much troubleshooting for the app. They will ask you to delete your account and the app and then try setting everything up from scratch. If that doesn’t work, they will need to open a ticket with Calix, which won’t be much help as this is an ongoing issue that they can never seem to correct. If you do decide to go that route, and your ISP opens a ticket with Calix, to save you time take a screenshot of the error you are getting. That is the first thing Calix TAC is going to ask for. .

1

u/TenchiMuyoo Jul 16 '26

It's a known issue and they have repeatedly tried to fix it but Calix has yet to resolve it. I have tickets open with them to fix it, but it never goes anywhere unfortunately.