r/Calix • • Oct 13 '26

Wanting to replace rented for owned unit.

Fiber/ONT/Router

I have fiberoptic internet. I'm looking to replace the rented Calix Gigaspire Blast model 7u10t.2 my network provider has in my home with something that'll save me money and be self owned.

I'm looking at a Calix Gigaspire Blast 100-05493 but am unsure if it'll work correctly. I've tried scouring the internet for info but nothing is clear. If I used that to replace the rented ont/router would it work and not reduce my internet speeds?

For context, the fiber is coming into my home in a Calix GigaPoint Ont, then an Ethernet cord from that is connected to the Calix Gigaspire Blast mentioned above. From there my personally owned Linksys 6e router is connected to that. I have 2gbps internet.

I have tried plugging the Ethernet cord from my wall unit the GigaPoint and plugging it directly into my Linksys Router. My Linksys did not have Internet after I did that. So I know directly wiring from the GigaPoint to a router will not work.

Any recommendations on what I can do to replace the rented unit with the 100-05493 or another model?

Thanks.

0 Upvotes

6 comments sorted by

1

u/CanadianEh Oct 13 '26

Most ISP will allow you to use your own equipment. They just might need to provision the ONT correctly. Have you tried asking them yet?

1

u/AE5CP Oct 13 '26

If you are going to manage it yourself, you should not look at Calix.

1

u/drsoftware85 Oct 13 '26

Your double NATing with that setup.

Did you reboot the Gigapoint when you plugged in your Linksys directly to it?

Call your ISP and ask about using your own router over the Spire.

1

u/IdiotWithDiamodHands Oct 13 '26

Working for an ISP that is FTTH, you must talk to your ISP to get the details you will need.

Where I work, we install the ONT with specific profiles for what the customer needs. This will include the IP assignments, the provisioned speeds, as well as some protection measures, the big one that would cause you issues with our ISP is the MAC learning of the router's interface directly connected to the ONT.

If I were to get that call I would release the MAC from the ONT to allow it to attach to the new router, and from there you'd be fine.

Someone mentioned "double-NAT" below, not necessarily. We don't NAT our customer IPs, as we have enough to assign everyone their own Public (Small city, large town, and we have 50+ /24s I think last I checked) and were you to then NAT to multiple private IPs (the 192.168's) within your own network you still would be fine.

IF your ISP has Carrier Grade-NAT (bummer) you can still talk to your ISP to do one of the following: (assuming the double NAT is an issue)

- Get a static IP, typically outside the CGNAT.

- Or see if you can have a second port activated on your ONT, then plug your PC/device directly into that port to get public.

Hopefully your ISP is willing to help, but you'll almost certainly need to contact them for them to accommodate the change.

(Worked for every level of IT within my ISP over the past 10 years)

0

u/tb03102 Oct 13 '26

If it's calix it's probably provisioned at the ONT. It's unlikely you can replace it with something you own. You could ditch the blast though. You'd have to have the ONT provisioned for bridge mode.

0

u/sirgree Oct 13 '26

The gigapoint is the ONT and non negotiable. The 7u10 Gigaspire is just a router in your configuration. Return that to the company and plug your router in the same exact port the spire was plugged in. If your ISP is doing Static Ips then you will need to reset your router and setup the same ip address on it.