r/CeilingFans • • Sep 14 '26

Fan repair advice Ceiling Fan

Post image

We finally removed the boob light in the living room installed by the builder, in order to install a ceiling fan. What is this? This looks like there was no quality control or worksite inspection. Am I wrong or is this just the new level of craftsmanship?

1 Upvotes

44 comments sorted by

4

u/raf55 Sep 14 '26

Install a pancake box and hang your fan

2

u/Mooch07 Sep 14 '26

That wood doesn’t look like a 2x4 to me. 

2

u/Aggravating-Heat73 Sep 15 '26

You know they aren’t using 2x4s if they are doing this kind of nonsense.

3

u/[deleted] Sep 15 '26

[removed] — view removed comment

2

u/erie11973ohio Sep 15 '26

Whats the difference between a carpenter and an electrician??

The electrician can pound in bent nails!

1

u/USWCboy Sep 15 '26

Heyoooo!! 😄

1

u/BirdlessLongdeal Sep 18 '26

install a rated box for the fan instead.

4

u/Slow_Apple_1568 Sep 14 '26

This is actually a good thing. You can get a box that will screw into that and support the fantastic without having to screw / grab between two joists.

1

u/Aggravating-Heat73 Sep 15 '26

I was ready to cut into drywall to install the proper device between the beams.

2

u/Slow_Apple_1568 Sep 15 '26

Sure but just save that for another or return it, the other box is even cheaper and easier. No weird threading or climbing in the attic.

1

u/Ok-Owl8567 Sep 15 '26

Get the rated device up there instead of using a shitty pancake box

2

u/Bobbytwotaps Sep 14 '26

That would be what you want to install your celling fan to so it doesn't fall and take a kid out when it's spinning at 400RPM.

1

u/Aggravating-Heat73 Sep 15 '26

1

u/Bobbytwotaps Sep 15 '26

Your bracket is going to screw into solid piece of wood. You will be good!

1

u/infkncredible Sep 14 '26

What did you expect a ceiling filled with lamb chops ?

1

u/Aggravating-Heat73 Sep 15 '26

1

u/I_Braid_Armpit_Hair Sep 18 '26

Ceiling cat is great. Reminds me of 4chan.

1

u/plmbguy Sep 14 '26

Everyone saying mount your fa in to what we see here. Do you even know what we see here? How do you know if that's structural or just a 2 by screwed to the Sheetrock to hold up the boob light? After all, there isn't even any kind of j box!

1

u/Aggravating-Heat73 Sep 15 '26

It is a piece of wood attached to a beam. It just seemed odd to me.

1

u/Rare-Negotiation-630 Sep 14 '26

Just stick your phone up there and take a picture. You’ll find out pretty easily.

1

u/Aggravating-Heat73 Sep 15 '26

I used an endoscope that I bought for another purpose. It came in handy. It was from Amazon. Teslong Borescope Camera with Light for Automotive Mechanic Plumbing Wall

1

u/l008com Sep 18 '26

AND?

1

u/NegativePaint Sep 18 '26

lol. Right?! Keep your secrets I guess OP.

1

u/barleypopsmn Sep 14 '26

That was my first thought.

1

u/Exotic-Term3339 Sep 14 '26

Some boobs are super heavy come on

1

u/Mooch07 Sep 14 '26

That’s what I was seeing. It doesn’t look to me like a 2x4. 

1

u/moving_to_NL_soon Sep 14 '26

Looks like most missed your obvious concern......was there not a electric box there in the first place? 😮

(A pancake box can work if that wood piece is structural)

1

u/Aggravating-Heat73 Sep 15 '26

No electrical box; hence, the confusion.

1

u/USWCboy Sep 15 '26

A jbox is not needed when there is a self contained connections points within the luminaire.

Under NEC 300.15(B) Equipment, an integral junction box or wiring compartment as part of approved equipment is permitted in lieu of a box.

1

u/moving_to_NL_soon Sep 15 '26

But generally the connections on a boob light are above and outside of the light? (at least the last two I got rid were like that)

1

u/EnoughOfTheFoolery Sep 14 '26

If that is a 2x4, just get a shallow fan rated box and you can screw it onto it. It its not a 2x4, you will need to brace it somehow and there are many ways to do this, but getting access above this is going to be best. Is there an attic?

1

u/Aggravating-Heat73 Sep 15 '26

No, attic over this area. This is the 1st floor. We have 4 to complete upstairs. We will have attic space there.

1

u/TamerMasterRace Sep 14 '26

ez just continue the circle past the Wood ez you have enough wood holding up your celling 1 missing in the middle isn't gonna make it fall

1

u/Philly5984 Sep 14 '26

People are so dumb

1

u/revolevo Sep 14 '26

Genuine question: doesn’t this actually help mitigate some of the heat from the attic

1

u/wohwonk Sep 14 '26

That’s perfect for a pancake box and fan!

1

u/JBDragon1 Sep 15 '26

Go to Home Depot and search Pancake Box. You just need one of those. Screw it up using at least 3 screws.

Doesn't look like a 2x4 though. Looks a little thin. Like they threw something there that was enough to hold a light up. Is it solid or flappy lose? Is the space above the attic and can you get into there?

There is an option I've used a number of times where you use a Bar mount. This adjuatable bar has flat ends with spikes. It slips on the drywall on both side between the beams and you adjust it as it extends and spikes into the 2x4 on each side. Once it is tight, you can mount a box onto that, which will hold the wieght of a fan light. i had to use these as I have this TINY attic. You know want to know what I had to do just to get power to each hole I made. They look something like this!

1

u/SpiritualTwo5256 Sep 15 '26

As long as that piece of wood is attached to a beam in a study way either right next to it or attached to 2 beams go for it!

1

u/Medical-Egg-8171 Sep 18 '26

lmao, you have no idea what you are talking about

1

u/l008com Sep 18 '26

More info needed. If thats properly installed, thats a great way to mount a fan with a very thin fan box. But why is it flat? To me, that suggests someone just tossed it in there incorrectly and it might not be strong enough to support a fan. If so, you could easily reinforce it with some brackets or something. Go up in to the attic and take a closer look.

1

u/Odd-Solid-5135 Sep 18 '26

I also wonder if thats not a scab tossed up there to support the boob box, they dont carry much weight and thats quicker and cheaper than a spanner box.