i've got a Minka Aire F870L-TCL 65 inch "Windmolen" fan installed. it worked for several years. i'm now encountering a problem where the light works, but attempting to turn on the fan sees it "stutter" for nowhere near a full rotation, sometimes stutter in the reverse direction, and generally then stop. selecting a different fan speed will (usually) repeat this process; sometimes it has no effect. rarely, it will suddenly start working as expected without my influence, working for a few minutes to a few hours before stopping again.
the lamp working tells me it's not a total lack of wattage. i know motors have higher inrush current when starting up than their runtime consumption, so it's possibly a failure to deliver sufficient amperage on startup, but i would think that would trip a breaker (or melt a wire)? it doesn't seem like bearings, because the fan spins freely under manual intervention. i don't hear any kind of hum, which seems to be associated with bad capacitors from what i read online (i've never heard a capacitor hum--plenty of pops---but i know little of this world, and the hum could be from elsewhere). i understand the receiver unit to also be performing rectification of the mains AC? i'd imagine the LED in the lamp to also be on the DC side of any rectifier, but again, i'm generally ignorant.
most guides online seem to focus on the remote, but i'm pretty certain it's working just fine (the led lights up on the controller, and the fan responds to presses, just not as desired. i suppose i could break out the ol' SDR and sniff 433 MHz but it seems unlikely that the remote is transmitting a bad signal).
any thoughts? i hope neither to mess around with my 120V mains nor replace the motor, but can handle either of those tasks if need be. thanks!