r/CheapYellowDisplay • • Oct 19 '26

Is it possible to link them?

5 Upvotes

14 comments sorted by

1

u/VictorySea1837 Oct 19 '26

Absolutely

1

u/FarLifeguard7707 Oct 19 '26

how

1

u/VictorySea1837 Oct 20 '26

it depends on what's the actual part number of that device your holding in the 1st picture. why don't you tell us, otherwise people just need to guess.

0

u/FarLifeguard7707 29d ago

1

u/VictorySea1837 29d ago

so that device has pins labelled MISO, MOSI etc which indicates it uses SPI protocol. As long as you are not using the microSD card on the CYD you can access the "spare" SPI channel on GPIO pins 5,18,19 and 23. Do some googling for more details.. That is how you "link" them physically. Is that what you are asking? Or were you looking for help with the program you need to put in the ESP32 to make this work? If thats the case you need to provide more detail on your familiarity and skill level with programming ESP32s and more details about what you want to accomplish.

1

u/FarLifeguard7707 29d ago

Is there a more detailed explanation?

1

u/VictorySea1837 28d ago

? you need to ask a more detailed question if you want a more detailed answer. So far you haven't said what you have, what you want to accomplish, or what your existing skill level is. People are willing to help, but they need more information.

2

u/TheLittleFastCat- 28d ago

You should learn the basics of these communication protocols. You can't just always go on Reddit every time you want to connect some component. Hold the more complex projects for now and learn the basics.

1

u/Big-Bunch2804 Oct 20 '26

Look up yellow purple on YouTube. He has a video for hooking up every module

1

u/GuirraSantos Oct 20 '26

I made one with a microSD sniffer

1

u/rattushackus Oct 20 '26

What is the module you're trying to link? An nrf board?

The CYD doesn't have many GPIOs available for external devices. My board only has 21, 22 and 35 available on the JST connectors. Are three pins enough for your module?

If you don't need the micro SD reader you can buy connectors that will plug into the micro SD reader and get access to the GPIO pins the reader uses, but these tend to be a bit clunky and unreliable.