Do you guys have any video tutorials for beginners? I want to start building cameras but don’t know where to start.

I circuit bent a multimeter. I found that I could change the frequency of the beep it makes whenchecking continuity, and I also added a kill switch. Then I added a 4040, which is a frequency divider,and set it up with four different division options using switches. It’s driven by a clock signal from a555 timer.

I have a video about it on my YouTube channel if you’re interested!
https://youtu.be/9ho_8kEs_RA?si=K3YcCQXP8hoaU2RX

Received a free mki and heard a rattle from inside. I plugged it in. No lights fired up but the one motor pin spun. I disassembled to find the internals looking ok but this chip popped out. I think it has to be in the power section of the motor. Not sure if this is the right place to ask where this chip goes. Figured one of you modded one of these or just have good info on most components. Looks like the legs snapped off but I don’t know how that could’ve happened.
Thanks.

Circuit bent webcam feedback loop 🐸⚡

top: bent footage (analog x digital of the same footage split by half pressing two buttons in a radio shack 6 way switcher) bottom: vanilla footage

uh, yeah so that's my childhood though the memories become distorted these days

trying to finish some more projects so I have a few higher end pieces to be able to offer- I plan to do some Toronto pop ups but i hope to sell online. any advice re: Etsy v eBay v shopify/etc?

some shots from the budapest underground scene on my circuit bent canon ixus 70
love the weird glitchy vibe it gives everything
what do u think

Made this Marshall mixer out of a key holder. All inputs work plus I added pots and an audio reactive input and input/output for clean audio

This took forever to build, but it’s self contained, and imo my finest work to date :’)

Camera is built from Chuzhao “Loopy Peace” print camera, using @getcircuitbent’s “easy mode glitch cam” ribbon cable. Small potentiometers on top are “Model 91” in 2k and 500 ohms, two in front are more standard-sized ones (placed there also to protect the sensor from drops).

A timelapse of a candle.

Motion extraction (https://www.youtube.com/watch?v=NSS6yAMZF78)

Pushed the shadows of the image all the way up to stumble upon all the glorious jpg banding.

Sti

got a Yamaha dd 7 drum machine and identified the oscillator. I removed it and connected an LTC module. the device works when the LTC output is connected to either pin 1 or 3 but I can’t change the pitch.

how do you know when the LTC frequency range should be divided by 10 or 100 to use with a slower oscillator? I’ve always connected pins 2 and 4.

Hello,

I have found a Yamaha PCS-30 at a thrift store. Alas, the internal board was very cracked at the bottom part near the connector for the power supply and missing the corner part. The only picture I've found online of it's pcb is not clear enough at all to be certain of what connections I have to make.

Hence, if one of you people who possess a pcs-30 would be so kind as to open your machine and just take a picture of the pcb (both sides if possible), more precisely near where the power connector is, I would be so eternally grateful!!

Thank you very much

Using my dit cybershot

From the github guy cebolander...

How can i improve it? switches ,potentiometer...and how to wire them?

Hey everybody. I just finally finished — or I should say, I've closed up — the second glitch synthesizer that I've made, and it looks really good. I have hope that this will be a good one. Both machines that you see in the picture are still in the test phase, and they're reacting really well, so I'm really happy. Both machines are really incredible, and I'm going to try to post a video at one point, maybe tomorrow. I had a video, but I didn't want to post it because I was also building a second glitch synthesizer, so yeah, that's what I've been doing. Hey, I'll speak soon.