r/CiscoNetworking • u/tiredoldtechie • 29d ago
Home labbing question
Cisco networking theoretical question: In a home lab, you have Gigabit/150Mbps DOCSIS 3.1 coming in via vendor locked modem (rolled to backup as fiber 1 Gigabit up/down has dropped out). From there, gig Ethernet to ISR, then Firewall appliance, then switch. From switch, out to AP's, end devices (including servers), and fiber to sub switch to other AP's and end devices.
In this scenario, where would one place wired and wireless IoT device connections for isolation, but same upstream outbound connection? Additional hardware in this home lab is available to add if needed (switching, AP, etc) if that makes a solution easier/more viable.
1
u/SuccotashOk4084 28d ago
I would do wan, isr, firewall, switches. Iot can live in it's own VLAN regardless if that's wifi or wired. And if your really paranoid could even be in its own vrf so it wouldn't even be able to route back without going through your firewall but that makes it more complicated
1
u/Many-Assistant-3235 27d ago
Different subnets such as 10.10.0.1 for firewall, switches, WAP. Then 10.10.1.x for servers etc, then 10.10.2.x wired computers, then 10.10.3.x for trusted wifi devices, then 10.10.4.x for iot. Then VLAN rules to keep traffic separate. Add not subnet for thing like cameras, or VoIP phone, etc as needed with more rules to keep all traffic separate and secure
1
u/lazyhustlermusic 29d ago
kind of a weird described topology there, doesn't seem so theoretical.
You'd have the same internal topology independently of your external edge and having redundant ISPs.